3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
m
ministr-s 13.09.19 10:08 pm

Guys help to choose budget but beautiful body

Help me choose a case with a backlit side of the glass wall, and once with additional cooling, for everything I have up to 8K rubles, maybe something missed, correct campaign, highlighting wish that was managed mainly from the body.
55 Comments
Sort by:
R
Remanar 13.09.19

Leathermonster wrote:
thought about Ambilight - lighting system addressable LEDs wall behind the monitor. That's all the space stuff
Yes, Sam is watching )

Leathermonster wrote:
but once leg awkwardly pulled on the plastic window small scratches left
I have the housing on the bracket on the wall, no problems with accidentally hooked and truncated. Housing with transparent walls intended to not be hiding under the table )
In matreks toughened glass is not armored, it means that if he arrives, it will not break into dangerous blades, and scattering Pebbles. Therefore feet even with the matrix to be careful waving, but rather to raise the body higher.
By the way, you can adjust the backlight in tone and it turns out like this Ambilight system.

E
Elidias 13.09.19

now there is a

S
SPR1GGAN 13.09.19

Elidias
mm plug on mardee ,blow-off top when Ceres pulls to the silk on the bottom of the case ,it is nice ,but you can find nice and -10 hrusov in the system unit ,but something tells me judging by kouyu BP price tag on it for 5K+ a dust filter, where?

E
Elidias 13.09.19

SPR1GGAN
at the top there are sysoids BP. Yes, and I don't like being out front there is no passage of air only takes the bottom but is a little cough. But otherwise beautiful. The temperature of the norms of FDI that summer but fall and winter will be cold finally

M
MuSStafA 13.09.19

I'm not a purist, but even in the photo it is obvious: the joints of the body at angles skewed, there are flaws in the housing Assembly. As a whole cute, but not the best for my taste, that can be found in the budget segment. And legs, as I understand it, low (this makes it difficult for air flow to the PSU).

m
ministr-s 13.09.19

Elidias
with such filling of any body is just mega-fire look:) by the way what is that model? looked at the output system in Matrexx 70, live looks just the fire, I wish your body looked, would be estimated for the money and have finally decided what to take what not

M
MuSStafA 13.09.19

ministr-s
With proper attention to the organization of lighting inside, Matreks will be more interesting at times. Now the trend of case-aquarium: people want to see your powerful hardware, you can get aesthetic pleasure. Closed the case this will not provide. Although a matter of taste...

A
Amarelius 13.09.19

gennaz
as much as tears welled up, looking at your post! carposina proooooo gun, there was a live legend
but if the trends on glass and light bulbs, the new diprolene I like more, maybe the efficiency of pumping air through the housing and is not the same as the old, but a lot of coolers plus vent.grid and exhaust top, I think the result of cooling will not worsen

g
gennaz 13.09.19

Aurelius
The new model is also good, you can take.

M
MuSStafA 13.09.19

Aurelius wrote:
can the efficiency of pumping air through the housing and is not the same as the old, but a lot of coolers plus vent.grid and exhaust top, I think the result of cooling will not worsen
And the process of stones decreases, the dissipation is decreasing every year. Out the laptop has long been a generally passive system ahlada. Most likely updated Matreks designed to balance noise and efficient cooling.

R
Remanar 13.09.19

Elidias
che on the rock DLC is not pinned like f deptula is the complete DLC for this case? with lighting and all. You can still vertically none to deliver, if slack, well, or support the use of saw legs are sold the special is also illuminated.

P
Petruxinson 13.09.19

Remanar
Vertically to put vidyuhi-it is a perversion of some sort. You mean what ITS talking about? Why is it complete? What prevents another postvil? Lighting, too, will work.

R
Remanar 13.09.19

Well dipko same except buildings and ohlajdauche makes all sorts from the hull valves to DLC. On the office website looked in the buildings section, there's pictures of buildings are DLC. It is better to put the valves from the same manufacturer, I think there will be all fully compatible in terms of management and in terms of design

M
MuSStafA 13.09.19

Remanar wrote:
Well dipko same except buildings and ohlajdauche makes all sorts from the hull valves to DLC. On the office website looked in the buildings section, there's pictures of buildings are DLC. It is better to put the valves from the same manufacturer, I think there will be all fully compatible in terms of management and in terms of design
Most likely DLC, and stand for none on the above photo for illustrative purposes is depicted. The manufacturer wanted thereby to show how his idea should look like a fully stocked case and how it was originally conceived by the designers. If you have installed the DLC valves occupy half of the perimeter of the body and work on blowing on a par with front valves, including pumping out the hot air from the case.

D
DikeyFive 13.09.19

MuSStafA
I can say that the producers have good taste, I would like to have that kind of system unit assembled as in the photo. Some work on blowing, but work on the front air intake and serves him in? There are also ventilation holes?

M
MuSStafA 13.09.19

DikeyFive
Vent. blowing on the holes visible in the picture (between the side and front glass panels). If it is insufficient, remove the front panel and arrange inside the body of the storm)).

P
Petruxinson 13.09.19

MuSStafA
Well, it probably counted, when designed, and considered that these holes would be enough, meaning something to shoot there. Although it is possible you get any stove stick type AMD FX then maybe you have to remove, again not a fact.

M
MuSStafA 13.09.19

Petruxinson wrote:
Well, it probably counted, when designed, and considered that these holes would be enough, meaning something to shoot there.
Of course, counted. Moreover, it is not the only hole on the air intake (symmetric hole under the bars there are on the other side of the case). The possibility of removing the front panel, rather the possibility to adjust the scheme of air circulation.

P
Petruxinson 13.09.19

MuSStafA wrote:
Of course, counted. Moreover, it is not the only hole on the air intake (symmetric hole under the bars there are on the other side of the case). The possibility of removing the front panel, rather the possibility to adjust the scheme of air circulation.
Yes I know that they're on both sides, thank you. It seems to me that most likely cover removed in order to clean the cooler from dust.

M
MuSStafA 13.09.19

Interesting scheme of installation of the panels. so, the sidebar is not fixed on 4 screws, and 2 screws top, bottom panel inserted into the groove. this scheme prevents the formation of internal stresses and as a consequence cracks.
A front panel button is released.