game and old monitor (Spyro Reignited Trilogy)
Hello! the game after the screen saver gives black the monitor says that the frequency does not fit(I have a video card gtx1050 but the monitor has no digital input and an adapter to play) ,in windowed mode, alt enter does not work.there are options(without buying a new monitor) ?
Thank you!
motifxs wrote:
...writes that the frequency is not suitable...
The game runs with a frequency higher than that supported by the monitor: e.g. 120 Hz instead of 60 - typically, when this screen appears, type Not supported mode, or something like that. The sometimes so would occasionally use Custom Resolution Utility: it sets the desired value (resolution and refresh rate), then the system and games identify them as possible (as if the screen above does not).
I have Before using the program:
After installation and configuration:
...the monitor has no digital input and an adapter to play...
It's not the adapter and the Converter from graphics cards GTX 1000 series from nVidia and RX 400th AMD removed the DAC (RAMDAC) and there was only the digital outputs (DVI-D or later) with a simple adapter as before with DVI-I to VGA plug does not work. If the above program does not help, probably put in the Converter - then it is desirable to write the model it and monitor.
Yes,probably the problem is in the LNB(cheap bought for $ 9)...with the game all would be rules,if only it was possible in windowed mode to switch(from moghimi games it worked for me),but Spyro what it does
motifxs
If you try the program, please accomplish your goal on the results. In the future most likely will have to buy such a Converter and want to know how it will work with this software.
you can try to enable vertical sync and lock screen resolution with Framatom:
to do this, open GameUserSettings.ini on the way: C:\Users\%Username% \AppData\Local\Falcon\Saved \Config\WindowsNoEditor
there is a section [/Script/Engine.GameUserSettings]
look there for these lines, and if any not, put:
bUseVSync=True
FrameRateLimit=60.000000
FullscreenMode=0
LastConfirmedFullscreenMode=0
PreferredFullscreenMode=0
bUseDynamicResolution=False
ResolutionSizeX=xxxx
ResolutionSizeY=xxxx
LastUserConfirmedResolutionSizeX=xxxx
LastUserConfirmedResolutionSizeY=xxxx
in line FrameRateLimit=60 60.000000 is put the right frame rate with the monitor, or switch to 60Hz in the settings Windows and leave the line as is.
four lines with a resolution put which one you play.
as an example:
ResolutionSizeX=1920
ResolutionSizeY=1080
LastUserConfirmedResolutionSizeX=1920
LastUserConfirmedResolutionSizeY=1080
if you do not help, you can try this experiment:
bUseVSync=False
FrameRateLimit=0.000000