Trottling GTX 1060 (reference)

Alex KAM
Do you have any idea what 70 degrees, and how this temperature affects your map?

GG4 wrote:
I do not understand where you have these temperatures
The video card is different.
I have ГТХ960 Gaming, working temperature 39градусов. Under load 50-60 and no more, and then not hold up to 49 average. Than it can be heated, I don't know.. a soldering iron unless specifically. ))
And dvuhventsovye gigabytes 900 heated.
Cards should look, test.

GG4
Well, if the hand to touch the 70 seems hot, on the other hand, the bath thermometer shows 85 and rules ))
But seriously I have no idea how this temperature affects the map. And even though I'm not an expert on iron but have technical education and understand that without concrete facts, all these words just vibrations ... nothing more. Every material has a threshold thermal resistance, and before you say that 70 a lot or a little, need to know the threshold.
Tech support of the manufacturer of the card wrote that up to 90 valid. And in General I have no reason to trust You (GG4) more than technical experts MSI.

Alex KAM
temperature 70 - excellent working. up to 75-80 I would not particularly worry became. moreover, what is the maximum temperature in the time, as most of the time in the game she less. 80 - has a psychological threshold - and I would try to him not to bring =)
PS in the program msi afterburner is possible to construct a curve of the dependence of the speed valve from the temperature. 1060 - pretty cool card and usually always have a reserve of speed to keep t in a comfortable range.

Alex KAM
Do you even understand what you write? I wrote you the same thing, from 70 to 90 this temperature, the card will work, but will deteriorate and will start then problems of a different kind (how lucky).

GG4
GG4 wrote:
from 70 to 90
GG4 wrote:
will degrade and will start then problems of a different sort
you can confirm your words? =)
When? After how many years? What's the problem? And then I have here 280х to 85 degrees worked for 2.5 years and was successfully sold.
REFs Pascal - 80 degrees normal temperature.
My Ref is configured from the factory at 75-76 degrees for about 60-70 percent of the valves to turn. If there is such a degradation, don't you think that would make tuning of auto modes other was?)

Test drove Heaven, which repeatedly referred to above. As a result, when unscrewed at ultra settings, maximum AA and extreme tessellation fps started to jump in the range from 40 to 100. But the best part is that the maximum steady-state temperature did not exceed 70 C. the msi afterburner writes 100% download GP and 100% power. However in the room a little chilly 23-24 C, But fans and the card only worked 70% of max revs.
In the same tank, the Temperature does not exceed 63 S. But just something needed to correctly direct the airflow. And even without the additional fans at a cost... it is Necessary only in case extra ventilation holes to do )))

People prompt please, such question was raised. I have to say, not all read.
I have a 1060 6gb video card asus turbo, heated to 83 degrees, some games, is this normal???

Legioner09
For refence - YES. Can be reduced, increasing the momentum to change the work schedule of the turbine, try if interested. The program msi afterburner, there in the settings section, change the cooler, and then put - to force the update speed of the cooler. But watch the NOISE.
You can even replace the thermal compound. As an option, to roll Noctua [NT-H1], good thermal grease. But, see seals, warranty lose (through service). Generally, if you have 2 years and more in active operation, the thermal paste should be replaced.
And so, if you manage to keep most 60-73, it is possible and not to think.
- The maximum GPU temperature under load - 79 °C - IS WORKING.
Temperature limits normal operation of the graphics processor is 94 degrees Celsius.
So, you can leave a little or dig deeper, if you wish.

VOVAN WOLF
Thank you very much for the clear answer! Everything is very clear, yet leave so. Thermal paste replaced, nothing has changed.

Gtx 1060 turbine in games constantly 83 degrees is this normal ???? And the cooler is not heard, through msi ad the curve was made when reaching the cooler starts to increase the speed! Why, without third-party applications, it does not increase but reaches the mark of 83 degrees