The results in the benchmarks v.5
In this topic, measured by PI... parrots in popular benchmarks.Previous topic
Note: screenshots must be hidden under the spoiler! Otherwise, posts that contain screenshots, not removed under the spoiler, will be deleted!
Lodurr
Lodurr wrote:
And a screenshot of where? )
What do you care?
Lodurr wrote:
55, 65 with 4-hole applications
And AMD do not care 4 applications:
Spoiler
Lex-one
This dual rank memory modules for 16GB. Hynix D-die 17нм, and even CR2.
At the start there
54000 / 57500 / 52200 / 47,6 latency. The screenshot above.
In comparison with modules the Samsung B -die behind at 3733 C16:
54200 / 57200 / 52000 and the latency of 42.2.
So Samsung topic of course.
In comparison with 4000С18 CR2:
58200 / 60400 / 54300 / 42,3 latency.
Above? It is necessary to try. I have to sort out the timings. I was already tired. Well, have CR1 Samsung.
Luka_gg
Luka_gg wrote:
Above? We must try
If correctly setunit of tredicce the secondary can take 38 NS and 62-65 GB write/read.
Lex-one
I asked, these experts have not found, those do calculator chase. Studied this subject, tried. But there's deeper to dig threw. Is such knowledge?
And yet, 38 have only seen once. I do not Shine with CR2. But the guides, if there is, share.
Luka_gg
Is the method of selection and not one hour. It is possible to spend a month chasing testmem5. As they say enjoy, intol needs to work out all the money that he invested, and so there is no sense to take it
Lex-one
I have in the selection subtyping BIOS flew back to the previous version.Recruitment timings/subtyping the Typhoon not working
Lex-one
First a Typhoon, then not))
The crack tRC.It was during his decline in the BIOS flew on an earlier version, and the mother showed timings
Spoiler
guys, thanks to everyone who gave advice, very happy that so many people responded and even in person were ready to help. I'm about friezes on rx 580 q r 5 2600. it was not in the memory (two-channel for 8 GB). everything is much, much more prosaic. It's a slain file system hdd. put ssd, from the friezes there was no trace.
i9 9940x @ 4.7GHz (mesh 3.0GHz)
RAM 32Gb 3466GHz @ 3800GHz (17-19-19-40)
CPU-Z
CB15.jpg)
CB20
-SK.art-
Oh, my 3900x is a little behind.
Cpu z 8500
Cb15 3200
Cb20 7500
Despite the fact that you have a stone dispersed in a hollow and 4 streams more. Oh intel.
Lex-one wrote:
Oh Intel
Not an intel. And patches against "vulnerabilities" for intel stones. A couple of years ago before these very patches of intel stones in these benchmarks were noticeably faster. My then 7820s in the CPU-q scored about 5500 points, now its result in this test is about 4950 points. In the blue bend 15 he scored earlier about 2100 points, now about 2000.
zi: The processor is not dispersed into a hollow. For games it can continue to drive. At 4.7 GHz I decided to stop, because it is no longer advisable to drive further, and in stress tests will overheat.
Good afternoon! Correct me, the essays in the wrong topic and the wrong section asked the question. Recently recently bought a budget processor "Intel Pentium Dual Core G3420 3.2GHz/5GT/s/3MB s1150 BOX" - cooling "be quiet! Pure Rock Slim". Up to this point, the box cooler was installed, which was supplied in the box. You will not tell what this processor should have a working temperature in games: - in the load in games and other, and for example without games, (in a simple "just at rest")? Because she started the stress test in AIDA, and she reports that the maximum temperature in the load with the FPU test does not exceed 39 degrees, and with the load on the cores comes almost 57-59 degrees. And when you start the game - on the cores on the contrary less than in the stress test AIDA (up to 33-39 degrees), and the tspu comes to (48 degrees). That's what "MSI Afterburner" says to me. BIOS updated to the last revision. This is my very first processor since 2014, decided to refine it (get a good cooler). Fan turnovers are set at maximum. How should it be? Maybe software sensors lie, or the thermopath has dried up. Thermopast applied its purchase too not long ago (the consistency is well smeared on the lid of the processor), because when installing the cooling had difficulty fixing the clips (fastenings) it in the socket during installation. This is why Artik MH - ("Swiss") has been insed. Please explain. What's the reason?