Friezes in games
Hi all. I'm always in online games happen MicroProse. I've already climbed the entire Internet and could not find a solution. Played recently, the Witcher 3, everything worked perfectly no freezes, and start the game Smite, and every 10 seconds micro freezes for 0.5-1 sec, I don't know what it is, I play on medium graphics settings, everything was fine before, but something happened I don't know that there were these freezes, I tried to include the most minimal settings, still these friezes. And when it happens Friz cooler like turns off at 0.5 sec and again starts to work. If you are knowledgeable please help.PC configuration :
The radeon r7 360
Monitor resolution 1366x768
CPU itel core i3 3210
Hard drive Plextor PX-128S2C, ST500DM002-1BD142 (Games are always put on the SSD)
RAM 8GB
dronkk
dronkk wrote:
Played recently, the Witcher 3, everything worked perfectly no freezes, and start the game Smite, and every 10 seconds micro freezes for 0.5-1 sec
If the processor at the time of the Frisians is not loaded 100%, then it's not him. Windows has long been established? What version of video card driver? Corny, virus system check?
Ryazancev
I'm using MSI watched the state of the graphics in the game, 40-50% utilization of GP medium and 70-75 at maximum speed, the case may not be in it, I bought it not so long ago, maybe 6-8 months ago
kung fu master
And using the processor to monitor during the game that would be in the corner of the screen, display?
dronkk
MSI Afterburner, you need a Daw in settings put. It is desirable that the load was displayed on each thread.
Here is a video
Spoiler
See 18:34. In humans, the same percent as you and a faster video card. The game runs 90+ fps without freezes. So, percent in Smythe should be enough even for max settings.
UPD: Not doctoral percent is not the same. Anyway, 70+ fps without freezes you definitely should be.
dronkk
In afterburner Settings, monitroing, choose Download CPU and put down a tick to Show in the overlay, etc.
Spoiler
kung fu master
Well, it is not written anywhere that it i3 3210 can have a Core i3-6320!
kung fu master
I agree. For purity of experiment it is necessary to clean OS to try.
dronkk
Clearly criminal can't see anything. The friezes were? What are the indicators at the time of the Frisians?
dronkk
Please see the temperature of the cores at load, too high temperature Proca (cover) Maximum cover for specified as 67.4 °C. was throttling enabled.
kung fu master
But the core clock MHZ to maximum and jump back and forth look, is this normal?
dronkk
If the load frequency is about 1000 MHz, it is normal. In the end, try to disable power saving features in the graphics driver.
Ryazancev
Everything is normal. The Intel of trolling starts with 90+ degrees.
kung fu master
Different generations-different temperature. You say (90) about the temperature on the cores. The graph shows that the temperature of the lid reached 77 degrees. For this critical percent 67.4 °C. the temperature of the cores will be much higher. Quite a there is the possibility of freezes from overheating.