Heat i7 6700k
The computer I have a year and a half, never a problem with the temperature was not, but yesterday there was for the night game, swing, bf4,start today, and see it as a temperature of 80 degrees, although earlier in the game never rose above 70, the Witcher 3 was 64. Disassembled the computer, shook the dust, replaced the thermal grease, but nothing really has changed. In the BIOS is also why it shows 70градусов. Did stress Aida learned 97градусов,and even the computer started to slow down. Paste MX-4. In the stress test before it was 70-80. In 33 easy right now,but sometimes jumps up to 40.OkGo
What is the best antivirus? MNU just except there is no current stock windows defender
Andrey Chernetsky
three hundred GamMax not the most powerful Carlson, IMHO:120ка at 1600 rpm, is...(speaking as a former holder thereof).
You want to download cut down all energosberegenie percent in idle keeps naprugu and frequency for all the cores, well greetsa more than usual. If the enclosure is small and poorly ventilated then there's your overheating, you should also check the profile of cooling in Windows, where you would raise the percentage of the CPU status.
Andrey Chernetsky
I use Avira. Force of habit.
Another of the free are BitDefender, AVG, the free version Kaspersky.
Kahran Ramsus
Well before the housing was no more,although temperatures were much lower,even if you think that because of the heat outside,I don't think last summer was very different
Right now the way in just 27 degrees,but sometimes podmigivaet to 41, and slowly descends back to 28 -_-
Andrey Chernetsky
I would have to start tried to find out whether it was true readings. Considering what temperatures they show hands to check not worth it - better to take a multimeter with a thermocouple or other device with similar functions and measure the actual temperature of the cooling system. Of course, the readings will not coincide with an accuracy of a degree, but to identify the apparent inconsistency is not hurt.
Andrey Chernetsky
You probably damaged the Professor did.
I have 6700K for almost two years and to 70 degrees it was heated only once because of the stress test.
Spoiler
Spoiler
50-60 working temperature. The above is bad. Although calm can be under 80 to play. But it is better in a simple 30-35. in the load to 50. and a little overclocking. Overclocking wouldn't happen.
Andrey Chernetsky
Stupid tower is a bit loose not tight to the CPU. The thermal grease to put forgot. When you consider all the hardware new and 0% deterioration. BIOS upgrade for mother. View HWMonitor then.
Геллитрон1
About density it is necessary to check by the way, the paste is MX-4
Andrey Chernetsky
Most likely the miner! I also have the same Prots, even in acceleration. The temperature was fine.
After all sorts of machinations,the removal of all the files are checked with antivirus,removing a strange file calledNotaVirus I poluchil 68-70 degrees in the same bf4
Andrey Chernetsky
When you don't know for me it is a mystery. A lot of nuances. See sort the processes in task Manager because. Stress Run Linx for stability when overclocking for example not sickly warm CPU. Maybe the MOSFETs podgnivat. I don't see a photo of my mother.
gennaz
[Denis]
[Denis] wrote:
Snot under the hood, the CPU has dried up)))
With tongue removed)).
I'd rather sit with snot under the hood than on AMD.
PS Guys, jeez. What is the miner? What you carry. He has in the BIOS is 70 degrees. There are 2 basic reasons. Either the cooler is badly pressed, or simply marriage, not smeared paste as necessary.
Andrey Chernetsky
What kind of cooling is worth it??? 70 much like me*( although if no solders MB and norms), I had such Prots with the solder + nocte, with 4.5 ragon, max temperature in the load in synthetics to 65, usually somewhere under 60 worked
BigInteger
Yes, he probably was looking for which is more expensive ))) and connected it all to a CRT monitor 17 inch like.
Motherboard True_Rivethead chose probably do by Bolden, not understanding even what to buy. Took motherboard for workstations focused on the use of a large number of GPU but something I had not saw not that 4 even 2 graphics cards and not one M2 drive.
The graphics card is from the category of the cheapest GTX 1080 with poor cooling, again bought not even knowing what to buy )))
The case is another story of the stupidity of purchase, have a housing for the 20K but not the system to have no SSD and sit on the ancient CRT monitor, that is the dumbest I have ever seen.
Andrey Chernetsky
Andrey Chernetsky wrote:
In 28, is cooled by the cooler deepcool gammax 300 MX-4 paste
I don't like the coolers with direct contact heat pipes. The heat is not evenly, in a place of contact and worse between them, while the plate has a uniform coating and distribution of heat. In addition, there are gaps between the tubes, and the surface may not be perfectly flat which will reduce the cooling. After all, when heated metal expands and who knows it will shift this tube is 0.1 mm and you can forget all about the ideal cooling and greet crap.
Andrey Chernetsky wrote:
MNU error-all 2 departure was just Bang hung sound in one place,and all hung,restarted the comp,he still would not understand,thought thought,after 3 restarts the current.
Similar symptoms were on an old computer that parents gave, so there is the cooler clogged completely (on the carpet) that generally does not rotate and the computer after a certain time, just hung out as you have. So the problem is really possible due to cooling, can cooler fits poorly, pasta put too much. Take off the cooler and check the evenness of its Foundation.
MagicHero
MagicHero wrote:
I don't like the coolers with direct contact heat pipes.
The processor cover, it plays the role of the uniform heat spreader. The heat dissipation? And iron between the tubes and the heat-spreading lid of the processor is thermal resistance, the lid of the processor has a thermal resistance when the two sides different temperature, then the temperature difference is below. It's like, okay? And if you count the difference, and is it not better to exclude it?
The gaps between the tubes? It is those negligible o. 5 mm? Nevertheless, tubes in contact with the surface does not become less, and the heat-spreading lid of the processor left.
Yes, and the surface may not be perfectly flat well, I guess that cooled everything is fine, Riesen 1600S at a frequency of 3700 gives 55 degrees on Prime 95.
Because when heated, metal expands - and how much it expands? And what this means?
View table: Aluminium expanding from 22.8·10-6 at 0°C to 23,7,06·10-6 1/grad at a temperature of 100°C. 10 to the minus 6-th degree so that. To get how much!!!!! And if you take a room with 25 to 80 CPU (relatively, actually less). And the most important question - WHAT???? Well extended, then what? Then a 0.1 mm?, . as insignificant and copper.
What tales to tell, right, well, do not get it never, happens, now I know.
The only question is the surface, its preparation and status, Yes ,and so, in the calculation of the cooler with direct contact heat of trubkakh BETTER.
And something about the thickness of the heat-spreading lid of the processor, its temperature resistance and teploprovodnosti You don't say weird. But we should start with her.
All quite perfectly:
deepcool gammax 300
This three heat pipes, a lot of naked. I understand why such thoughts, jumping to conclusions, why such a negativity to them. Actually ahlada is different, I forgot something. Sorry! With the same success, and the heat distribution plate it is possible to deliver, but it better not be, the heat is still withdrawn tube. Except that the copper plate is better and the coverage area of the tubes must be more. And what to want from a cooler for $ 1000?