Overclocking GTX 680.

Glich34
well, the warranty warranty and lifetime maps you cut their dispersal\

That kind of nonsense? When Soviet stereotype leaves the minds of users? Video card, processor and other electronics - not a set of gears, so prone to wear in the classic sense.
Work at high temperatures (for video, for example, at a temperature of about 80 degrees) does not lead to the notorious degradation and wear. Here is one possible outcome - the achievement of the maximum temperature (over 90 degrees) and death.

I just laugh with such especially not overclocking the video card, do not load it, it runs my games at 60 degrees, enough for a long time. You have in her, polysynthetic filled and you're afraid of overheating to the piston walls are not formed burrs?

The author use a map in the temperature range up to 80 degrees without problems. When overclocking only looks at temperature.

pochtipushkin
you just don't understand the point of overheating. overheating is when all sorts of small electroshock type cuts. transistors, capacitors and sertonergic tracks too long exposed to thermal influence, such that they begin to sail, to lose their properties and so-forth. Look, you ever seen as a regular battery from the phone, the phone or the same PSP can just WHALE from the banal connection? You just have very long not to use them, and then paste - and herak'll kill him. Or because he was exposed too long to high heat. Electronics swell will not, it just starts to float, and if it will work is a miracle. But she of course immediately loses its speed, the metal becomes brittle, fragile, easily heated.

Glich34
Dude to toasting video cards no one accelerates, unless under liquid nitrogen to victory in the ratings. All after overclocking work up to 80 degrees, maybe a bit higher and it's okay not responsible. Officially, NVIDIA says that 90 degrees is not so bad. And get extra 10% -25% of prizvoditelnosti for free just a sin to miss. Percent so all sometimes up to 50% increase for free, though it was so long ago, new already so not looking.

Glich34
I vidyuhi Asus strix OC c factory overclocking.
Moreover, on the box and in the description clearly written, reference 1178, OS mode-1328Mhz. And I have it, for some reason, the game already gives 1418! So even with a raising naprugi to 1.2 V!
And all this from the factory! He did not drive.
And though once it is heated above 62°!

All that you rely, was relevant for cards 4-6 generations.
There was once I 470-I. That was a stove! Even with improved ohladom to 100° basking! Without acceleration. What actually burned.
9-10 and the current generation, so do not allow yourself to overheat.
So if the chip is not defective (this is usually just a bit of a hurried cut and called the younger series), then he'll be in five years.

Glich34
a lot says about you.
What is wrong if I'm tired after work, lie down on the sofa,pick up a controller and play Ведьмака3?It is of vodka,a TV and a newspaper.

this is also the way your level of thinking. Damn dude, I thought you were smarter, and are some sort of school's snowstorm.
You could use real people to talk and not to sit at home and give lectures.Then you looked at your level of thinking on the other hand

didn't know that for you is in a separate reservation in the Internet
No,you're probably Housewives forum came.All very interesting,what's the soup you made and how many times a week the floors are washed.How many times during the holidays washed?How you doing?

I DO NOT HAVE ANYTHING TO DRIVE. Want powerful buy a powerful, and their old cards collect the second computer. All point.
It's very simple:as much as you want,so write about it here.FUCK YOU WHO WILL LISTEN.Who drove the cards,he will drive them further.Who knows how to scalp the processors would do that.Who knows how to unlock the card (if it allows),he'll do it.Here a modernization razlozi one day, two 6950 in cross 6970.Thus he saved money.

you just don't understand the point of overheating.
You just do not understand the upgrade process.If 280GTX people have the artifacts were in Metro2033 (she's working temperature was above 100°C), then the 570GTX at 2000 rpm one of the valve it was heated to 83°C,and when 3000об/min. 72-74°C. When this map release 2011 and now 2017-yy.New cards are cool,and you're here Blizzard rubbed about the overheating.

[Denis]
[Denis] wrote:
.FUCK YOU WHO WILL LISTEN.
you are not, because you absolutely do not fucking cherish and so not very stable working electronics. This is not a military electronics is civil, is a touch too sweaty hand can cause a static discharge and will eventually burn SOMETHING that is not even to detect, but the map will not work. I write for those who do not know how to handle, but wants to extend the life of my computer.

Glich34
Your nonsense nobody needs

Glich34
Dude I wrote above that acceleration if it is sufficiently that it is SAFE. On account of the fact that static can kill components right, but I before they to take out or put touch the PSU or case to remove the category if there is one. Take at least percent of Intel, the same core frequency but different to just for people like you NOOBS to sell the same processor at different prices. Although it is possible to take the Junior in the line and disperse away from high, good crystal is the same. True Intel in the last percent this loophole became the cover, but on the bus what else to disperse.
Glich34 wrote:
you are not, because you absolutely do not fucking cherish and so not very stable working electronics.
I personally Bank the acceleration in moderation, monitor the temperature, for example using EVGA PrecisionX, you can set priority temperature, say 80 and all the video card as it will reach will begin to drop performance to cool down. And it really works, checked like that on the old 780 in Witcher 3. In the heat of summer when my video card warmed up to 80, set the threshold to 65 degrees and all the video card was not overcome and it was like the game fell performance.
So you just have to come and get their 20% performance on top and not sit and fuss over a video card )))

MagicHero
And Bonera momentum of the valve can not be added,enabling the valve on schedule?The higher the temperature,the higher the revs

[Denis]
I honestly have no idea what Buner, can enlighten. And curve speed speed I it's clear in the program scored below depending on the growth temperature and fans rotate faster. At low temperature they can be off but I'm starting with 20% fan speed, still do not hear them at that speed.

MagicHero
Did not hear about MSI Afterburner?Apparently,you're another prog I use.

Glich34

Dear, please do not tell me - engineer-avionics, their stories about the deformation of electronics (in this case video card) temperature 80 degrees. Do not mislead others for their incompetence.

The melting point of copper is about 1000 degrees Celsius, so I don't know what and where You have it floating. Yes, overheating leads to death, transistors, capacitors, but it's not 80 degrees, and a much greater temperature.

DMG EX777 wrote:
.What will happen if I activate it,will there be any consequences?
Even gigabytes, it is necessary to take mother Gigabyte. Then such issues would not exist.
In the Gigabyte motherboard, in the BIOS, there is a choice for a video card, standard, sport and extreme. Or the name may be different, but the essence is the same. On the RAM the same, and the processor. I mean, if put in extreme graphics card, and RAM, and CPU. But, the fact is that not all processors, and not all strap RAM support these modes. For example, a Vent out with a blue screen.
To put only the graphics card into the black, just won't burn.. but later will burn. Appears time the pixel squares on the screen, do not be surprised. )

[Denis]
I have to win 7 is EVGA PrecisionX and 10 wines just MSI Afterburner (EVGA PrecisionX there as it is not working, and constantly ship percent and in logs writes some error). But the fact that there is something called Buriram I didn't know if skin will show where the name is boner. About overclocking the EVGA PrecisionX as it is better to Pascal, allows for the construction of a frequency curve, to limit the exposed voltage low frequent high naprugi. Whereas in the MSI Afterburner curve can only increase up to and sometimes when setting the starting point 0.993 v 2078, vidyuhi can run on 1.050 v at 2078.

pochtipushkin
at first I absolutely nothing said about the temperature of 80 degrees. Second, the engineer-avionik? why avionik, why not engineer space stations? and even if avionik - this means you do avionics, not COMPUTER HARDWARE, they are completely different things, and here is your avionics? Can we even overclocking vidyuhi will right now the car mechanic to ask who carried out the electronics in the car? And thirdly - what you like, work for a degree or so, not working at all? what side is your avionics similar to the computer hardware if it is completely different in purpose and operation things?

Glich34
When I worked as a system administrator and have served more than 80 computers. For all time changed the iron many times from the static did not die. Your computer also upgrade many times, only one vidyuhi changed 8 times since I started to use it. And not something from the statics is not dead. You probably just curves hands once killed none statics. About brushes (I have some sort of a molar with a wooden handle), that I'm all the computers constantly from dust, including your clean and nothing died.

Glich34
What's the point of arguing with you. Let you have a graphics card then reduce its life from overclocking, and electronics floats.

P. S. In the profession not working 4 years, but knowledge and experience enough to understand what I'm saying. Electronics (processors), those on, not only in the home computers are installed. And the second discovery - not only the processors in home PCs heated. . .

MagicHero
I Burirom called MSI Afterburner.It's easier.Only forgotten how to do show naprugu.
Here,on the old screen,see the voltage of 1.094 v,I did not touch him:

And the card warmed up,look to 75°C.

Glich34
only washed-maybe that's enough to ignore sane arguments, calling them nonsense.
You have no arguments,only insults and shit

I've had one graphics card which burned down just because the brush, which cleaned off the dust was not too dry and provoked the residual static charge on the card, eventually the card threw. I've had one graphics card which burned down just because the brush, which cleaned off the dust was not too dry and provoked the residual static charge on the card, eventually the card threw.
If the hands of assholes grow,and then acceleration?

Where is the nonsense? Boy, you're in Valhalla in his addiction left? Don't want to listen - so shut up and not yell at the whole forum what nonsense, muddle skoropasky. First show me the relevant diploma to mouth gape.
Grandpa,you would go from here.To disperse the cards needed no white beard,no higher education.Enough YouTube.Surprised?FAQ on Bunuru and forward drive.If something not so will crashes and restart (in the case of testing a bagel).My specialty is not generally associated with electronics I on a lathe to peel the heat-resistant alloys.So shove your arguments in his white ass and scram sausage Minor Saviour

PS:For such a fat Troll like you,in my gallery there is a pile of poop.Noticeably,do not be lazy,perhaps that uzreesh.You're, like,so cultured,so you'll know where 4890 where 570GTX,and where the 7950.Eat,not the holiday

[Denis]
Pasquali dispersed in a special way, it is necessary to build the curve of the voltage-frequency i.e. set point voltage and frequency on the video card. And another feature is that when heated, there is a slight decrease in the frequency.
I am now in win 7 so the skin with EVGA PrecisionX OC



here's what a curve of fans