The latency of RAM for ryzen 2600
Now lateinos 76ns , this is normal performance or not ?Spoiler
Alexxerr
How many drove?
For how many bought?
Where to buy?
What is the manufacturer?
How many fps in the third Krayzise on ultra settings?
Alexxerr wrote:
He 2080ti, the same as you
He said that he had 2080. This means that the trip burned and it was changed to 2080ti. Can't find the message where he said that in 2080 there were any problems with the food. The campaign cleaned up the admin messages when it was banned.
semferot48
The latency needs to be 65 here about acceleration at a frequency of 3400 !
this is the norm for the 6 core.
https://wccftech.com/amd-ryzen-5-2600-cpu-benchmarks-overclock-tests-leak/
semferot48
Asus Tuf b450m pro-gaming just it can in 3500, probably in straps and the hands thing )))
X_ray_83
strap initially with a frequency of 2666 3200 for them a decent result , maybe they'll take 3400 but these timings they don't start , but to improve them I don't want to.
semferot48
Then going to catch the friezes at the latency of 70, then you whine on forums Ryzen bad because the handles of the ass )))
semferot48
Well the timings 16-17-17-36 it's all epic fail ! Overclocking is not your if so so we can all default to use.
X_ray_83
I have a voltage of 1.35, PI according to the manufacturer 1.2 , I you Council to disperse and did not ask, do not whine, unlike you , and about the handles of ass is not for you to tell me you don't know me , counselor !
X_ray_83
The fact is that normal people leave comments with a real advice about the help in my question , and your comments like :I have done , know and can do everything and you have the hands of assholesdo not bear any message except attempts to show his pseudoprojection . Whereupon otklanivayus , further conversation with you is a waste of time.
I've tried the 3700. And the primary on the nominal value wimal the secondary. And the RAM frequency increased/decreased. Or errors in games or reboots. Though he took from the calculator. And high latency 75-82.
Now it seems to have found a temporary balance 3600мгц. A little squiggle has increased and delays have become common below. MB a new BIOS helped with the new agenoy.
There is the most important of Thaiphoon Burner handles all copy into the calculator. To do the Reset in the calculator and pens to score.
Spoiler
semferot48
You have the way speed L1-L2-L3 cache in 2 times reduced. You need a secondary to deal with. And not always, less=faster. I have the same speed cut when the secondary timings too understated.
Spoiler
callmegod
The important thing here is RAM if it is not Samsung, you get this result !
And so 60-65 is a real result, just when buying a RAM it is necessary to take Samsung from with low timings.
Good afternoon. Worth a viper 4 by 3000mhz, dispersed at 3000mHz with timings 16 18 18 36, latency shows 72 n/s, chips cost from nanya a-die, in the amd calculator there are no chips
Aleksei_555
The essence of dispersal is far from in the primary timings, they almost do not give an increase. Nanya on my cull from Micron (I can be wrong). Ask the guys here https://forums.overclockers.ru/viewtopic.php?f=4&t=618848&start=4260
They will say what type is most suitable in the calculator and start "normal" drive.