Steering wheel control (Driver: San Francisco)
who nibkd could pull the wheel in the game?generally interested in the G25.
in the options the game does not see the pedals and the axis of the wheel. buttons on the steering responsive.
prodigy007
The program perfectly defines all that I set up - it spins and is pressed, but the game still doesn't want to spun the wheel and pressed the individual buttons. Only pedal...
try in your controller(button in settings) to put the axis in the wheel(too) button
Dear gamers, game developers responsible for the control in this game, for some reason, put a limited (and very small) number of types of rudders.
For example Logitekh G27 and 25, but there are similar logitechmouse controller in the folder 0xc295 - Momo Force
So renaming it 0xc299 determine G25
in 0xc29B determined G27
But in either case, you earn everything (buttons, throttle, brake, vibration) in addition to actually STEERING
Swapping in a specified folder in the file ControlSet3.txt the X-axis and Y-earn everything, but the steering wheel will be responsible for the gas and brake and the gas and brake behind the wheel, later in the program which in Windose is responsible for setting the rudder axis change places, set the inversion and everything works.
However, early to rejoice, but as already mentioned - game. In this regard, first, even on maximum sensitivity, the wheel in the game reacts mildly too late for a real turnaround, and most importantly, with increasing speed, the rotation angle is narrowed, and despite the active actions of the wheel, the car goes like on rails.
So a good game spoil a pair (or more) mildly bad people, responsible for one small, but key issue in the RACE - OFFICE.
why turn the steering wheel at speed more than necessary, even for entry into a skid?
mike223
and you got the file with the settings for Г27? give pliz atoms I file found and where there are axis to change I never found.
In the file ControlSet3.txt is the unit dedicated to steering wheel:
ACTION Vehicle_Steer
AXIS
-STICK_DI_X
+STICK_DI_X
END
If you remove the 3-th or 4-th row, the wheel will work, but only to the right or left, respectively. Who will make the wheel spin in all directions, I would be very grateful, as many others in this thread!!!:))
guys, I Г25 hooked up, everything works. but no irreversible attention that Backlash helm of a large, tobish twist twist and then the wheels turn. m? launched with the help of emulator for Xbox pada. but I set to was determined as a gamepad. Sha will check the wheel and unsubscribe.
all 10 minutes and voila. Г25 the noises in the game, without the grandfather of the zone without delay and proeee. I'm on 900 degrees play. tjazhelovato with the reaction since this is an arcade and not a simulator, but still. favorite game now with wheel. )) schA will return to check. you can have that ini file to reset to not soared. all you have to curves RUTI was. and everything will work ))
the controller works great. anyways, a controls are easy to understand. want on the wheel, I want on the controller.
K. O. K. S.
and which ini file I can throw? There I have three files throw - xinput1_3.dll, msvcr100.dll, x360ce.ini. Or am I mistaken?
STALIN_01
Yes, three files just not the ones that you're talking about. but they have t export is, and the third executable to configure the buttons and all sorts of rubbish. on the wheel play fun, but a little uncomfortable pancake as it turned out, a bunch of buttons necessary, and them on the wheel all is nothing (( I play on the gamepad, vibration, everything is there.