Iron.
Gentlemen, can you please tell what component of my PC in this case(!!!) don't export?Take the example of the game -- Styx: Shards of Darkness.
The game epic (maximum) flies at 60FPS freely, but until then, until the frame will not hit enemies (i.e. entities), even if their only 2 tough loss. Battle 1, for example, the computer calmly exports on medium-high at 60, and here the problem. Read the comments - you write that the optimization is good in the game, and that means I'm in trouble. So-what's the matter?
CPU: i5 4670k 3.4 GHz
Graphics: Nvidia 770 2GB
RAM: 8GB
System: Windows 10
VOVAN WOLF
Berner I'm just not even set up, supplied fast performance and shut down, now all superfluous disconnected. Graphic settings back to the original to see how it will work. Well and about temperature - recently been taken apart and cleaned, changed paste, etc., hence such indicators.
I will unsubscribe soon.
VOVAN WOLF
The reset really helped a lot, stable 60 appeared off post processing and shadows on low, and everything else on maximum. However, now there is the following, don't know, is this normal?
san490
To change the thermal paste on the CPU and video card tried? Because I have the same video card and battle 1 goes high. Put dh11 in all games. shadows and textures are mostly guzzle memory and smoothing.
Canic forever
Yeah, recently that's changed, a few days ago. In the test the guy at the temperature of 80 in General (in this game).
maximum performance in a negative in the game styx2 affected card from your configuration.
san490
Yeah, 80 degrees for the video card seems not critical. The graphics card is not so old, to play on minimum bet, she quietly got to get on high settings in 1080p. Estessno with some disabled features type of hair in the Witcher etc in other games. If the problem is not solved and cleaning software, so a breakdown in the vidyuhi and easier to change.
san490
And depending on how many drops fps if 10-15 fps, the floor konesh fine. For example, if 60fps will be 45-50fps. Or have you had 60fps, became 20-25 fps?
san490
Well, you see, just wonderful. The temperature is normal for these cards in the range of 80 degrees very well.
Here is the graphics card from AMD, it seems 290Х, has a temperature of 95 working, and nothing. The limit of NVIDIA said the same in 95.
So, everything is fine, don't worry.
By the way, if You don't like this temperature, you can use Afterburner schedule: the temperature versus percent fan speeds, the temperature will drop.
san490
C 60 to 40 is normal for yours, I thought frieze and falls below 20фпс. For a stable 60fps at max speed in 1080p on any games will need gtx1070 and 16gb of RAM. And not the fact:)) gtx970 or 1060 is not advised, because a stable 60fps at the highest possible settings will not. The same 40фпс.