R
RomanAleshin68
14.04.20 01:03 am
Problems with the compatibility of different laths
There are 4 strips of RAM ddr2 at 800 MHz., 2 at 2 gig (samsung) and 2 1 GB (from an unknown manufacturer). After the recent change Mat. fees they refuse to work together, and instead of starting your computer you only hear the signals, and even before the BIOS doesn't come up. Before replacing and it is currently working together. It turns out that you can put either 2 dies on 2 gig or 2 for 1 (well, there is the obvious choice). However, I would like all 6 gigs to have. Could this have something to do?44 Comments
b
bloomm
14.04.20
Well, it's 8 GB to get unilateral dies the same as he is now 2X2 GB are and will be happy.
R
RomanAleshin68
14.04.20
Ryazancev
most likely really the point. For I now had. Two dice are started does not matter, other manufacturer or the same. But three-and more - once the computer starts beeping and nifiga not included.
b
bloomm
14.04.20
Heretic_x68
Determine what memory you have unilateral or bilateral, all 4 slots will work if they are all one-sided.