Strange CPU indicator in task Manager
Launch Manager,and for a second, CPU load over 80%:83%
and immediately drops:
5%
Mein got?
Coping
X_ray_83
GA-AX370 Gaming K3
ASUS I was on AM2+.She died recently and was replaced at the gig,the one where the MOSFETs are not cooled.I have on two platforms of Giga
Denis Kyokushin
Even if Gigabyte is all there is, if you're not a NOOB and put pure X. M. P then Yes it is not put !
X_ray_83
Yes, the choice of frequencies, but it is not saved.
KHMR is speed almost does not lag behind the manual overclocking to 3000Мгц,only the voltage it 1.35 v and 1.39 v when you manually have to put
The most interesting ctiv specs on this mother strap recommended frequencies 2133/2400MHz,but in real life it is possible to raise 3133Мгц
Denis Kyokushin
It is necessary for miners, and viruses, scan your PC, a program called SpyHunter and not all that funny when you have now worth it.
X_ray_83
I'm on miners differently checked))).I have vytseplyat using the task Manager, then found them a place on the hard and removed.But there is a very clever approach, which is written in the first post.Well,Yes, okay,download.
VOVAN WOLFovich
VOVAN WOLFovich wrote:
As with the disk?
Home to the mother drive is.It say that I need and put.
VOVAN WOLFovichнаписал:
Good luck, with his operativki. It's not Cl14, Samsung B-die.
But I have not tried it at 3200.Does not work.Whether in the PERC case, whether straps are.To 3133Мгц can be lifted only with my card why?
VOVAN WOLFovich wrote:
The same under 50 jumps. Let's go 70 in the test was high.
I'm new to Core Temp saw 104 degrees on the CPU.More don't trust her.
VOVAN WOLFovich wrote:Not true. Support for modules of RAM DDR4 3200(O. C.)/2933(O. C.)/2667*/2400/2133 MHz.
Warranty work - 2133 / 2400. Next O. S.
Of course, now is not true,because the page is updated.When I looked, all straps in the recommendations or on 2133Мгц,or was at 2400MHz, even if they 3200Мгц.I have wondered, why the hell buy a 3200,if the recommended 2133Мгц.But I have 2933Мгц earned in KHMR.It is still a BIOS F5a was.
VOVAN WOLFovich
Over 2.5 years of work the 1600S there were no serious issues and problems.
And they were judging by the reports of AMD. Because of the changes done in the Bios Pitalovo )))
VOVAN WOLFovich
With 3600 flew to 3466С14 easily.
Because the flow 3600 3200 of course it has pursued claims otherwise, it was a lot !
At 1600 drain 2600, at 2600 2933 is nothing surprising in this.
Another thing is when some pundits buy cheap Geil memory at a frequency of 2133 and want to get a 3200 or 3600 that nonsense in itself.
395 to 435 (10%) CPUZ. Manual overclocking these numbers will not.
Come on do not give, just all depends on CPU and not overclocking.
Over 2.5 years of work the 1600S there were no serious issues and problems.
I all drivers under AM4 disk is put automatically.Today for the first time put to the percent - perfectly at all. I told the driver. Not percent case. As with the disk? Hmm. Percent here at all at Affairs. I like MSI Live Update, all machine sets, except for the BIOS-but of course.
X_ray_83 wrote:
Must be at least 70-74ns.
80ns is the bottom and see the friezes in games because of this.
Good luck, with his operativki. It's not Cl14, Samsung B-die.
Spoiler
Kyokushin Denis wrote:
How many do you have on the 3600?
Spoiler
The same under 50 jumps. Let's go 70 in the test was high.
Kyokushin Denis wrote:
The most interesting ctiv specs on this mother strap recommended frequencies up to 2133/2400MHz
Not true. Support for modules of RAM DDR4 3200(O. C.)/2933(O. C.)/2667*/2400/2133 MHz.
Warranty work - 2133 / 2400. Next, O. S. - in acceleration, which means no warranty or selective recruitment modules.
You should always see the latest updates from the portal. In General, the Internet is our friend. And drives to forget, and use in a pinch.
Chips of straps you have to look. And there already to assess. And I already told You, and then the other, 1) the worst gig fee, the worst overclocking results on it And 2) I have a Samsung similarly, over 3,200 could not raise the 1600S. With 3600 flew to 3466С14 easily. The controller gives the bus (in 1000 range around 1500 (3000), at 2000 - 1600 (3200), 3000 - 1800 (3600 to raise Зен2 easy) bus with a multiplier of 1-to-1). 3) there is No reason to continue to suffer You trying to overclock something, get stable numbers, but the voltage DDR4-1.4 / SOC Voltag - no more than 1.2 / 1.25 and went on to deal in the secondary and treecko on the calculator. All the more do nothing. You will achieve the best performance with only 3600 rayzen, everything rests on the RAM, there up to 3600 is just as easy to drive, and Intel, though the cache has no meaning. I have long proposed to replace (I know, I know - money).
Kyokushin Denis wrote:
I'm new to Core Temp saw 104 degrees on the CPU.More don't trust her.
Strange, it never happened. Well, somewhere something went wrong.
Haven't updated to that last point, the percent became wildly Bastida, up to 4150 and performance on stream increased from 395 to 435 (10%) CPUZ. Manual overclocking these numbers will not. Prozy's generally not touch now.
X_ray_83 wrote:
Come on do not give, just all depends on CPU and not overclocking.
The probability of getting a good stone is very small, as to acceptable voltage for continuous operation. To 4150, it is hardly as getting 4100 / 4200 2600 / 2700.
X_ray_83
As promised:
Manual overclocking RAM
nothing like this whole overclocking with the AMD patch
VOVAN WOLFovich
VOVAN WOLFovich wrote:
Strange, it never happened. Well, somewhere something went wrong.
Dylan,you were my topic on this issue and had to see my screen
VOVAN WOLFovich wrote:
Not true. Support for modules of RAM DDR4 3200(O. C.)/2933(O. C.)/2667*/2400/2133 MHz.
Warranty work - 2133 / 2400. Next, O. S. - in acceleration, which means no warranty or selective recruitment modules.
In the lists of frequency changes.
He can see the dates and changes:
https://www.gigabyte.ru/products/page/mb/ga-ax370-gaming_k3rev_10#support-doc
I AM4 bought in September 2017
Denis Kyokushin
Yeah bullshit why can't put 16-16-17-34 !? Crap is not the acceleration is success, all the flow let it be !
X_ray_83
X_ray_83 wrote:
Yeah bullshit why can't put 16-16-17-34 !? Crap is not the acceleration is success, all the flow let it be !
At what frequency?
Denis Kyokushin
Well, in your screenshots 3000 and 3133 here and put the average value and the minimum timings ! Th complex !?
X_ray_83
Again nonsense?
3133 with such timings will not take
By the way,the screenshot shows the acceleration to SRI 3900Мгц.I acceleration do,percent in default
See the difference in the frequency CPU-Z and Aida64:
Spoiler
But re-test:
Spoiler
Patch on the latency of RAM is not affected in any way
Denis Kyokushin
Patch on the latency of RAM is not affected in any way
Affects the L1 CACHE ! The L1 CACHE is the most important if that, from there, the information is loaded first.
Of course nonsense, I kind of wrote must be 75 or the meaning of this acceleration no !
78 is the acceleration on the machine )))
It was impossible to put 16-16-16-34 but present ))) And if the secondary timings to reduce !?
You can't disperse because you do not understand what automatic acceleration worse !
About narathon supposedly, he 1500X Stoke 3700-3800, then into the log aggressive turboboost.
In this sense, acceleration is not present because you have some values be more other less, when overclocking always values L1,2,3 and more same less latency by 30% !
The conclusion is simple you can't overclock the memory and to edit the timings !
Denis Kyokushin
Here's an article on GECID there at 2900 and 79 are the same indicators as you 3000 and 3133 )))
https://ru.gecid.com/cpu/razgon_amd_ryzen_5_1400_s_geforce_gtx_1060_6gb/
Here is the output as would be obvious that something is wrong with his hands )))
Specifically we see all the indicators uveliciti and not fell like you have !
X_ray_83
Is the manual overclocking, I wrote to you above.KHMR is poorly distinguishable from manual to 3000Мгц.On FPS in games is not affected.Boost I 3900Мгц on a single core.And it is not working when overclocking.Exactly the same is not working when overclocking energosberegenie.To reduce latency need to strap some 14-33 14-14--when 3200Мгцах.Such was not when I bought
If you do not believe, how it works, I can Skype to show myself here to get
Denis Kyokushin
I wrote to you above.KHMR is poorly distinguishable from manual to 3000Мгц
I kind of gave a link ((
Here auto overclocking but custom ! You have it the same !???
That's what XMP is and at a frequency of 2400 and a range at 3000 !? Use your head for once !
The die was 2133 was 2400 but such acceleration is the loss of performance !
X_ray_83
In your article mate Board from MSI, and I have a gig.Vova asked, what is MSI, they have tabs on В350 better than my АХ370)).He had a Tomahawk
I have KHMR only 3000Мгц