The problem is in the connection.Please help
Bought a motherboard Gigabyte K3 Gaming AM4 under CPU Ryzen 5 1500X.The Assembly was faced with a strange problem:the Pitch starts with only a screwdriver.Click on start – silence.But if you press it when Pitch is on,it restarts.How to connect it? Two motherboards from ASUS were.Such problem was not with them.Windows is on the hard under the old config in the profile.While trying to start Win second visible blue screen.But you can go into the BIOS.Maybe need to reinstall?Peck asks to restore Windows and hangs at the time of offering to restore it.I have all the valves (except the two bottom blowing) is connected to the mother
I'm specifically interested in these three connectors:
On ASUS (with her photos) was
[Denis]
About correctness of connection of buttons of the housing to the motherboard - as already mentioned above, take the instructions to her and look at the desired section. If not sure + / - (usually markings on the nurse, and the transactions themselves are not always) - often colored transactions + and white -.
I have Windows on disk. Disk can not be what ?
No difference from a disc or USB drive - if the image is normal, not curve build Vasya should work.
...And if you put Vin7 x64, you have some files to change it in the UEFI...
The nonsense written. Put the same 7 on UEFI, which was previously set in BIOS (this summer also slightly however) - in the image of the installation disk already has the ability to install a BIOS (MBR) and UEFI (GPT), the system chooses automatically, depending on what's on the motherboard. If you put clean, while choosing a partition and remove everything in sistemnom disk / partition as before Windows will create the boot partition, but GPT.
Spoiler
You isolate the screwdriver from his hands, and then downlodes have a new motherboard to buy.
Just do not need to have a habit to climb in a computer included in the socket with his bare hands. Hands can only touch ground on the conductors.
An__ei
SonyK.
The startup problem is gone after a proper polarity.Created the image of Windows 8.1,but in the BIOS the flash drive is not seen as UEFI.What to do:
Fine-tuning BIOS for advanced users. Make the default settings then save and restart press F12 to invoke the boot menu (small rectangular box) put a USB flash drive with Windows in 1st place and hit enter . Further, if Windows downloaded correctly the installation will begin . Before starting the installation, watch the video on YouTube and good to learn . During the installation nor in any way do not pull out the flash drive. After installation the BIOS can no longer go just stick when pull off. comp., when enabled, starts from the disc which put the. If it doesn't start from the disc then insert the USB back in and turn then you need to understand the situation .
An__ei
I image off the Microsoft website downloaded.SchA record on flehu in UEFI using Rufus
[Denis] wrote:
in the BIOS the flash drive is not seen as UEFI
2nd paragraph from the top, where it says UEFI: UFD 2.0... is not selected ?
Where you have on the screenshot is written Other OS you must select UEFI (or something similar). I like: Boot / Secure Boot Menu / OS Type Windows UEFI Mode:
Spoiler
For the installation of Windows use the disposable Boot menu - appears if you hold a certain key while booting. It select UEFI: the STICK is downloaded, the installer of the OS.
P. S. do Not have to remove the screen third-party device in the UEFI, you can take screenshots directly using the special button, and the file record on the same flash drive where my Windows (when it has free space).
Spoiler
SonyK.
Got the installer window,but the Windows asks for the key.How to bypass activation after installation?Tried to put Win 8 x64.You also the same?In the old games play?
bazilews
To install Windows.Not so much to create a branch.With your connection sorted out.Windu always put disk without problems with AMI by pressing F8.With UEFI first encountered.But then,it turns out, each manufacturer differently
bazilews
On the flash drive with GPT for UEFI.When setting out the window-installer with the enter key.That's something this window it is necessary to bypass to activate Windows after installation
[Denis] wrote:
Click on start – silence.But if you press it when Pitch is on,it restarts
LOL! You mixed up the PWR and Reset))) Amodest!
Porsche911GT3RS
I have everything hooked up,interslope.And RESET POWER SW I do not confuse,on the motherboard minitable.I with the polarity wrong.
[Denis]
Welcome. I want to ask how Windows works. I understand 8.1 is delivered. I just read that only 10 will be updated on the new hardware block update. I somehow did not put, although I 8.1 the same dearer. The 1600S (the second system unit).
[Denis]
When you install Windows there is a skipor activate later,take a closer look.
VOVAN WOLF
I just try to put.
bazilews
I image to professional downloaded.Maybe another is needed?This or activation key,or close it.
Porsche911GT3RS
WTF?