Cannot enable DSR
DSR works very strangely, when switching it on 1.78 puts 2560 x 1440 and some incomprehensible, and so with all subsequentso you have it and puts 1.78 from its own, 1024x768.
if the monitor is in native 1920x1080, then choose it as the native resolution, then in the settings section it will be marked private. DVI-duplex hardware can bring something there in the area 5440х3060 60hz, and even more, I can't remember.
legusor
A monitor with a native resolution of 1920 by 1080, but the NVIDIA panel shows the native resolution of 1024 768, so I made a custom 1920x1080
legusor
monitor envision g2261w, prehistoric, through the hdmi plugged into the card(1660ti)
I specifically looked at the pages of this monitor in stores, review on utube and some text related, but not detected on the HDMI monitor. in your screenshot, the nvidia driver shows that it's connected by DVI. if you write that it's connected by HDMI, then you use a Converter VGA-HDMI or DVI-HDMI. these converters are different in quality, such problems can be characteristic dermansky models. or are you just lured and you have a direct connection via DVI. can try to remove all graphics card drivers in safe mode using display driver uninstaller, the latest version which offers a download from guru3d. I also recommend making all the contacts of the DVI cable, if you have it.
I specifically looked at the pages of this monitor in stores, review on utube and some text related, but not detected on the HDMI monitor. in your screenshot, the nvidia driver shows that it's connected by DVI. if you write that it's connected by HDMI, then you use a Converter VGA-HDMI or DVI-HDMI. these converters are different in quality, such problems can be characteristic dermansky models. or are you just lured and you have a direct connection via DVI. can try to remove all graphics card drivers in safe mode using display driver uninstaller, the latest version which offers a download from guru3d. I also recommend making all the contacts of the DVI cable, if you have it.
legusor
Yes, connected via HDMI cable is an HDMI to DVI to the monitor. I think in this case? The monitor is very old, before there was another graphics card(770) and here it was connected via VGA, there stood a normal resolution, and the DSR worked fine
an adapter will not work as it seems trying it as a real resolution and there to answer a bunch of
(so I have pokra extent)
and Vaga figurative and other analog can sleep over permission
and finally JEM is sort of like a virtual resolution output must be connected a monitor resolution so that there is somewhere a conflict of permissions
Antisovenok12
my sidekick ancient samsung monitor with VGA 23 inch 1920x1080. so it is when you buy yourself a gtx 1060 was also puzzled by the need for the Converter because the monitor no other interfaces were not. I bought a Converter for about pitik – the picture is junk and could not put the normal resolution. after replacement with another, more expensive (around a Grand), everything was fine – and the image without glitches, and the native resolution is normally exhibited. DSR have not tried it then, however.