Overheating 4790K
Cooler Deepcool ICEEDGE 400 XT, bought a PC 2 years ago.Only noticed when I wanted to overclock it, 4.3 is not in any took
In the end, I came to the conclusion that it is necessary to lower the voltage could be lowered to 1.130 at standard frequencies within 20-25 minutes of the stress test in CPU-Z the temperature rose to 96-97, the heat dissipation 100W
Actually the question is lacking of the cooler or thermal paste has dried up?
Nikita237
Links do not suggest, it tests not percent , and klad just stupid heating pad for computers with NWO ,the rock of the CFC, or Prime, Aida will be small and CPU—z etc , I do not believe that self-indulgence.
Nikita237
Nikita237 wrote:
Prime - 88.2 average, 92 max
What mode ? Blend?
SUSUL1
This playboy cores with AVX instructions.
Only after the fact, LinX shows me the error for 1 minute, and CPU-Z and SCR no shows
I have this percent to 3.5 GHZ ( I lowered the frequency) and it still removes everything, why overclock it?
Nikita237
It would be good to know the version of Prime, settings , voltage percent, COSATU percent, open frame or closed, the temperature in the room , the type of thermal paste and is there a scalp percent?
WWQ
Version 28.10, voltage on Auto 1.166, frequency standard 4.2 percent not scalped, the temperature is 28
Nikita237
The 5-minute test AIDA max - 70 average - 64 - quite normal. In everyday tasks, rarely will reach such a level.
Motherboard, at its full replacement will have to be removed completely, each set its mounting.
I shall only add, on account of the terrible phrase WWQ - is there a percent scalp - in any case do no scalp, no do not buy those used processors. In most cases, it does absolutely wrong, you can, in this case, to part with the processor.
You have the indices of the norm. I have at 4400 warmed to 93 degrees, test prime95.
Test
You'll never, in real life, reaches such temperature, in everyday tasks, and here they are, for three days of constant work system unit (games, software, browser, antivirus checking), secondary (General and within the 70):
In everyday tasks
So, kept within the limits of 70 and the rule do not bother anymore.
And Yes, in the future, if you want to work on temperature - change schedule of the cooler through the BIOS (if it allows), and you will have even lower temperature.
PS he has a nominal frequency of 4000, you have a gun the mother, apparently, puts 4200, 4400 puts me working. At 4000, I have the minimum was 24 degrees and the maximum does not exceed 60.
VOVAN WOLF
in any case do no scalp, no do not buy those used processors. In most cases, it does absolutely wrong, you can, in this case, to part with the processor.
How to buy processors, I did the right scalp. And successfully sold them.
Nikita237
and that's the feeling you have top, it should apply a thin layer of+ her strong clamp like.
Nikita237 wrote:
20-25 minutes of the stress test in CPU-Z the temperature rose to 96-97, the heat dissipation 100W
first, what is this test? If links for this miracle test is the norm. Do not need this water bottle to use to test stability. Warmer is useless, not a test. You can test test CPU: OCCT, it is based on Prime, warms not so hellish, with stability checks not worse. Enough hour drive..
In General, the cooler is not suitable for any overclocking.
Nikita237 wrote:
Today I bought a new cooler, ZALMAN CNPS9900DF,
one of the most useless purchases. For the same money you could buy a much more efficient cooler. The same five-HR2 Macho Rew. A/B is all better.