HELP PLEASE!!!! ASUS ROG Strix GeForce GTX 1070
Good people help please, I bought a card of ASUS ROG Strix GeForce GTX 1070 in the end, all installed, everything works, but there is a big BUT!, there is a program CPUID HWMonitor, which shows temperature, frequency and so on, and so I have the frequencies (Glocks) it does not exceed 734 mhz ever! although in bust she needs to 1860 issue, then (Memory) 405 mhz, but the worst 696.000 voltages v! what could be wrong? and yet the desktop has become very slow to load, what could be the problem? please help, at the horror(((Vadim1310
I have asus strix 950. Should bust to give 1328Mhz and gives 1418! And in different games in different ways. And all the rules. It is a feature of the strix line.
So don't worry, will be covered - turn in-warranty.
MagicHero
I mean, do you think the chips make how it?
And how it will end up Bastida unknown? And all manufacturers? From sucking up to the top. Do I understand correctly?
Map new, old prog, don't know what the map, put GPUZ and turn on the render test.
Kirlusha
Yes. Chips are tested only on the number of working units (if everything is perfect then 1080 if a couple does not work then 1070 if half rejected the 1060) and then passed to the companies who put together the graphics card. That's where the difference comes depending on the Board (number pitulova, good wiring, good memory chips) and radiator for cooling.
in short, the video card is being chased by almost all games up to 2000 mhz, but should be not higher than 1860, and most importantly the software from the ASUS what is strange, it works through time
MagicHero
Where such infa? I have these three strikov! One I have in the QX9770. One on the wife's computer with a E8600 and one at work, (some kind of Amud FX).
So they all work exactly the same! The box says: in bust 1328Mhz, and in fact, 1418! and not a drop less or more. Cards are bought with a difference in 8 and 4 months.
But the sidekick gigabite gtx 950, 1178Mhz and nothing more.
Kirlusha
So there it all depends on the wiring on the Board, probably just Pytalovo poor, or no cooling. Nobody in their right mind to test the chips on the limit of acceleration will not, and test them only after installing the Board. Overclocking is a lottery, I have written on the box 1562 frequency and 1754 in bust and in fact isolates a little more than 2000 without overclocking manually. And some 2000 even with overclocking I can not take and I have takes 2114 when the voltage of 0.975 v and it is very low as usual for this frequency who takes a bet of 1,050 V.
I'm using msi autoburner set up, but now another problem. In short if you look through the GPU-Z Asus Tweak or 2 my system requirements of the card was written yesterday, what with being chased by Boston to 1860, and acceleration, respectively, with 1600 something there.... then the information utility has been updated, although I'm not twisted. Eventually removed the Asus and put it all through MSI to 1950 Mhz, but in the characteristics map still writes to 1835 mhz in bust, although it was before 1860 that I clocked, help pliz
it happened after using as I think the Asus program, but I deleted it and the problem remained, they say many will say what do you care, why are you floating or something?and stuff like that. In short the question was 1860 was 1835 and the default settings also changed and become less formal
Corny of course, but in panel nvidia the power management what is? When I took GTX1080 default standing mode Optimal consumption. In games there were drawdowns and glitches, in particular the NFS has dipped to 40 fps and work blank screen. When I put Adaptive mode glitches and sags disappeared.
during the outage frequency is reduced to save energy and something you have in a simple fan mad that it is possible?
Vadim1310
Download utility msi kombustor on the msi website and run its stress test, but first put all settings to maximum resolution of your screen and max antialiasing, select full screen to set optional, there turn on gpu monitoring and see what frequencies map Bostic and what the temperature of the GPU. Test drive 10 minutes to the map time to heat up.
Affekt77
overclocking everything is fine, but on the basic characteristics ... DEFAULT GPU Boost is reduced, it is possible that it happened due to inactivity? I haven't played just yet
Vadim1310
What version of gpu-z? It is advisable to check for the latest 1.9.0. 2000 MHz it can show at the start, but prolonged stress and the achievement of objectified. temperature, the load, respectively, the frequency is likely to fall. Judging by the screenshots of the basic frequency are all OK, it is not necessary for this reason to bother, in any case, in games, the frequency will be higher.