3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
I
Igor Malenik 28.10.19 07:42 am

Very hot Ryzen 2600, what to do ?

Dude! Such is the problem appeared a week ago!
When you start Windows temperature Ryzen 2600(no overclocking) began to jump sharply to 67-80 degrees, and in idle started to keep the temperature of 50-55 degrees, and in load 60-72 degrees! That's a LOT. What to do help! Before it was just at 35-40 and 55-60 max 62 in the load, and right now a complete kapets! I don't know what to do! Maybe the cooler is moved away or the paste dried out ? Even got into BIOS did the screenshots. In the BIOS the temperature of CPU at least 41-45 degrees, and it's a lot. Is it worth to disassemble the computer and something there to see ? I don't know how to install the cooler, this will not be able to take it off yet. And thermal paste replacement I do not have. There is now arting of cooling MX-4. The computer is exactly a year and a half.








30 Comments
Sort by:
g
ghost_witcher 28.10.19

I have Ryazan 2600 and any special cogs on it, using a simple screwdriver, unscrewed and replaced the paste. The cheapest pasta now costs about 300-350 rubles. If you're a teenager, you will not be difficult to explain to your parents that you want to buy. On the other hand if you're already working, having a computer, you hardly rogue. On the tube VIDOS full disassembly.

d
daftCAT7 28.10.19

My i78700k now laugh,72 him a lot

I
Igor Malenik 28.10.19

ghost_witcher
And here it ? If my cooler is mounted differently than you ?
Right now, as you begin to twist and PERC unscrewing accidentally. Odd XS

R
Ryazancev 28.10.19

Igor Malenic
Damn, baby if that's the case, yet don't use your PC while 100 RUB. will find at least a temporary paste KPT-8 or GD-900 atleast.
In principle, the operation will not burn, because protection in it. But use is not recommended.
LOOK for 100 rubles for the first time. And then normal pasta will peramugari.
And do not LA-LA about the lack of a notched screwdriver.
Spoiler
You look like a FAT Troll!?

L
Luka_gg 28.10.19

Igor Malenic
If the reinstallation doesn't help, it means pure mechanical problem. The position of the cooler or thermal paste.
Igor Malenich wrote:
If my cooler is mounted differently than you ?
No need to escalate. They are all equally attached, everywhere a similar scheme with a frame on the motherboard through the four screws and then 2-4 screws already in the frame-a CPU cooler.
Igor Malenich wrote:
Right now, as you begin to twist and PERC unscrewing accidentally.
Kindergarten, pants with straps. It still may explode so that.
Percent tear is possible, if removing the CPU cooler, thermal paste through (especially excessive or thick), it strongly pressed / glued to the processor. I tore more than once (1600S), slightly bent legs even messy. Thermal paste changed, no longer so weld. Nothing in this terrible there. Enough to be careful and attentive.
Don't want to do, and what you want from us? I did say that the temperature is normal. Will be 85-90, and then panic.

daftCAT7 wrote:
My i78700k now laugh,72 him a lot
My 1600S ugaral over Your 8700k, test Aida 64 and 47 degrees. I have 2700 Riesen gave the BOX the cooler is not more than 70 degrees in the same test instructions.
Here it is:

I
Igor Malenik 28.10.19

Ryazancev
Protection you say ? My last i5-4670 stupidly shorted due to overheating, now it's on the trash lying around.

I
Igor Malenik 28.10.19

VOVAN WOLF
Well, now when the browser is holding steady 45 degrees if vidosik will not switch, and leave it in the background. Like real summer effect.

K
KillKammbest 28.10.19

Igor Malenic
Igor Malenich wrote:
And here it ? If my cooler is mounted differently than you ?
Right now, as you begin to twist and PERC unscrewing accidentally. Odd XS
You in another topic, he wrote the name of your cooler and you won't believe it is set like most others, first, bekat then the cooler on 4 screws (sometimes with a clamping plate for 2 bolt) so you have nothing beyond the natural is not )))
If you're afraid even cooler is to remove it bring it to the repair where you for the coin without problems will change the paste )))

d
daftCAT7 28.10.19

VOVAN WOLF
Yeah I probably would have basked would be well if the was 3700 , not 4700 as it is now, compared pancake.

L
Luka_gg 28.10.19

daftCAT7
Yeah, and the voltage to 1.4 AMD, Intel 1.26 max. Heated, it warms, because the thermal conductivity of thermal paste in the best case 10 W / m*K and the thermal conductivity of the solder 25 and more. It is not necessary here to tell over frequency. I have 5000 on 8700k and not more than 85, and that's without the instructions. And even then, 4000 in the 1600S so.