Nvidia geforce gtx 560ti graphics card problem
Hello me again. In general, they brought my vidyuha, they said that it was overheating, but they could not test it in games, and said that there were no problems in it.But when the driver was updated, the artifacts in furmark disappeared, but when the driver was launched, the driver "allegedly was successfully restored"
Lowered the memory clock to 1020 (stock frequency 2200) and it seems to work, but it does not fly out for a long time after 10 minutes. ?
GG4
Well, not everyone is born with a golden spoon in ... opera, some also need to earn money.
Alex Hedgehog
That's great.
Run the tests, play, look at the heating, if you leave everything buzzing (although I would have tried the 560se BIOS, I already said so The bit memory interface 192bit for the version is exactly 560se)
mustangar Spending
60k in 2 years on a new video card is not a problem and you don't need to be born with a golden spoon for that.
In general, thank you all very much, very much helped out. I tested in far cry 4 (I think the best benchmark: D) Everything works perfectly
mustangar
but how in this program (downloaded both) to do what would show the temperature in the game? now only shows the load in%.
ZiZu Zankercu You
need temperature - in the settings, check the boxes circled in red (the rest are optional):
Spoiler 
If you installed RivaTuner Statistics Server with MSI Afterburner (usually go together) - by checking the 2nd checkbox, you can see the indicators on the screen during the game. In Afterburner you choose what will be monitored, in RTSS you can choose the size, font color, position on the screen. Also, the program itself can take screenshots and shoot videos - you just need to delve into the settings.
GPU temperature
ZiZu Zankercu
You just need to start RivaTuner Statistics Server once and adjust the location of the indicators on the screen.
Alex Hedgehog
According to the screenshot of your card that you attached, the current cooler will do it too, 75 degrees for the 560 version is not critical. By office. har the limit is 99 degrees so there is a margin.
Replacing with a cooler that you propose can change such moments. (This is all approximately and may vary depending on different circumstances) There
should be less noise (I have a 2-cooler cooling system, it makes a lot of noise, another PC has a single-cooler system and its noise is already not pleasant enough)
The temperature is a difficult moment, since it depends on many factors, and you need to test on iron, fortune-telling is a thankless task.
My 560 drowns in games up to 71 degrees, I do not experience any problems.
For the test, you can try unscrewing the cooler settings through MSI Afterburner, so that when it reaches 70 degrees, it turns 100% and see if it can keep the temperature at 70, if yes, then let it work, but if not, then change it, unless of course the money is not stressful ...
Of course. it also works at lower frequencies. (Naturally, I'm
talking about stock frequencies) Here is an excerpt from an article about Palit GeForce GTX 560 Smart Edition (560SE)
As for the comparison of Palit GeForce GTX 560 Smart Edition with video cards based on the GeForce GTX 560 chipset, which is one step higher, we noted a noticeable lag this decision, which averaged about 15%.
Not really, in general, where 560se will give 20 frames, 560 will give 22.5 frames.
kym1000
It is clear, but in general the vidyuha from BIOS 560 feels fine, and the game has never crashed
I think the problem is in the Power of the Power Supply! ... There was a similar problem with the new video card (the same, gigabyte current) ... I put a powerful unit at 700W and everything became perfect! Before that, there was 500W
PS: The critical temperature is 100 degrees ... 60-80 degrees is normal temperature!
Vidyuha, although a dinosaur, but I play everything! Even if sometimes at medium settings (it doesn't matter)
I bought it very well)