RAM memory problems

if the memory is higher than ddr 3 pc1333, then it is possible that Bios set the voltage to 1.5v by default. from this it may not be loaded.

Kirill Dryagalin
he sewed a new BIOS.

Kirill Dryagalin
Nothing, just updated his mother

Try to reset the BIOS - take out the battery from the motherboard and put it back

If your hands are not crooked, then it is not in vain

She (MOTHER) generally picks. Hardware test passing?

Ryazancev xs
, higher below, dug in the BIOS, found DDR3 Timing Items

RyazancevRyazancev
How should it look?

Danila Mavrin
Go to BIOS and load the "Default setup" parameter (maybe another word)
Try to remove the battery from the motherboard (wait 20 seconds, and insert it back)
And third, try to swap the RAM strips

Ryazancev
Black screen with device names, numbers and bakwami?

Ryazancev
strange he sewed it

THIS are timings, forget about them for now. Your task 1. Reset BIOS. 2 Find out what kind of memory is, what is its default frequency and voltage.

Kirill Dryagalin
There is Load Fail-Safe Defaults and Load Optimized Defaults

all the same, then the mother does not pass the test!

Danila Mavrin
Load Optimized Defaults - load this parameter

Load Fail-Safe Defaults (Load BIOS Setup Defaults) This

command resets all BIOS settings to default values. At the same time, the safest values ​​of all parameters are set, ensuring high stability of the system

Load Optimized Defaults (Load High Performance)

The command sets the BIOS settings to provide optimal system performance while maintaining system stability. Depending on the specific motherboard model, these values ​​may be different, but, as a rule, the optimized settings differ from the default parameters by faster POST, faster RAM modes, faster bus operation, and some other parameters. Sometimes the optimized parameters turn out to be incompatible with the existing equipment, and after this command the system may become unstable. In such a case, revert to the default settings using Load Fail-Safe Defaults and then manually tune the system for optimal performance.

Ryazancev
Memory Clock x8.00 1600Mhz if this is what

if I knew what memory is more accurate. Well, rather 1.65 B than 1.5. Put 1333. Right now, the main thing is to start

Ryazancev
Something flashes in the boot between the motherboard and this screen where are the devices

Danila Mavrin
do you have a built-in or discrete video card?