The video card does not give out its wattage in games even close.
Hello everyone, please help me with advice. In general, I'll start with my system:Intel(R) Xeon(R) CPU E5-2440 0 @ 2.40GHz (I have a frequency of 2.7ghz)
NVIDIA GeForce RTX 3050 8 GB
16gb RAM DDR3 1866MHz (two 8 dual channels)
mother huananzhi x9d
PSU Cougar STE 500W [CGR ST-500]
Such a problem: the percentage and vidyuha in games sometimes do not load even up to 50%, mostly 20-30-40% (what is the GPU, what is the CPU)
And the video card in general - never gave out anywhere more than 100 WATT voltage (RECOMMENDED VIDEO CARD INDICATORS 120-130W), mainly in games such as PUBG (high) 60-70W (produces 50-60fps), GTA 5 (ultra) 70 -80 watts (produces 60-70 fps), and Rust is a MAJOR HEADACHE. AT HIGH GRAPHICS SETTINGS, and it does not matter whether it is high or low, the result is the same - no more than 40-50 frames, which is very high, which is very low, it does not matter. At the same time, the CPU and GPU are not more than 40 percent of the load, that is, I don’t have anything hammered into a hundred, EVEN AT 50 PERCENT I DO NOT HAVE either video or CPU in any game, the vidyuha does not give out its wattage, but the system itself works stably for me, no blue screens, no crashes, etc. I can not understand what exactly is the problem, where should I look for it and what to rely on. I ask for help and I will answer all your questions, with screenshots and more. I'm not well versed in this whole movement. I checked it on GPU-Z in games, there are no drawdowns on the 12 volt line, it gives exactly 12.0-12.1. I ask you for help) where should I look for the problem and how to fix it.
ruster223
Probably because your vidyaha does not work in PCI Ex 4.0! Also, the motherboard huananzhi x9d is called a double bottom)))
ruster223
I found several vids with your process, specifically with Rust and GTA5, in them he gives out exactly the same FPS that he gives out for you. Too lazy to throw links, already closed, and there are still timings with games to look for.
I think it's all about a weak bunch of CPU + RAM, that it grows, that gta5, that pubg are demanding on this bunch.
Because of them, you have a vidyukha and are underloaded.
X_ray_83
My 6600xt also works only on pci-e 3.0, but there are no problems with its consumption, it eats as much as it should when performance is focused on it.
I think that here TSa simply puts emphasis on performance in the CPU + RAM in these games, so the video is chilling. Prots is not fast anyway, it also suffers from lack of data due to slow RAM. It was necessary to take a motherboard with a three-channel and 3 memory sticks, it would be a little better, but I don’t think it’s directly critical. And this two-channel is everything, and it’s also unclear what timings for memory it sets in overclocking.
ruster223
The first thing I replaced was the processor!
2.7 frequency for the processor on which you want to play, this of course will be difficult for them to implement in the modern world.
I don’t even remember when I used this frequency, I always tried to take fewer cores, but the frequency was maximum.
The RAM will work even more or less, depending on today's purchase will be interesting for many.
ruster223
You need modern hardware like Ryzen 5600 or i5 12600k, there is PCI Ex 4.0 there and it will be 100% performance, and you have a cheap Chinese motherboard with a crooked bios what do you want from the HUANAN basement ???
X_ray_83 wrote:
Probably because your vidyaha does not work in PCI Ex 4.0
Nonsense. What does PCI-e 4.0 have to do with it. And Dakar has changed shoes for a long time. Video is old. yes, even if it is in the x4 slot, the video card will show 99% loading. And if this is not there, the percentage does not take it out, because. he is the fps in games. The percentage is weak, here you need to look for at least 8700k. PCI-e and 2.0 and 3.0 will suffice there. The tire is full-fledged, not like the 6500XT. The difference is an error.
It is unlikely that he will be replaced. There is no point in talking about it. Juanan is not taken from a good life.
ruster223
ruster223 wrote:
percents and vidyuha in games are sometimes not loaded even up to 50%, mostly 20-30-40%
It starts again. IN WHAT GAME?
ruster223 wrote:
Intel(R) Xeon(R) CPU E5-2440
Your headache. Proc bottom. 6 corn kernels. Here is the configuration with your process:
Spoiler
The same numbers. in GTA there vidyuha is resting. Try to look for a replacement on this socket more vigorously.
Loken
"My 6600xt also works only on pci-e 3.0"
Well, yes, a loss of 5-10% performance with 8 lines is "no problem" especially for the lower LowEnd card of the segment "smart"))) Here the motherboard is from "shit and sticks "Chinese HUANAN made from used spare parts and incomprehensible bios, therefore it is not surprising that "something works" for him at all!
01001000 01101001 Complete
nonsense. What does PCI-e 4.0
have to do with it Despite the fact that the motherboard is huananzhi x9d, read for it and don't write nonsense!
PCI-e and 2.0 and 3.0 will suffice there. The tire is full-fledged, not like the 6500XT. The difference is an error.
Well, yes, 10 fps is an error))) You probably use a PC for 5-10 years, judging by the mat part!
X_ray_83 Why are
you throwing AMD video, PROVOCATOR, when it comes to Nvidia. Where are you even looking? Go where you came from with your foolishness. He has a percent plug, not PCI-e. And there is not so much data there. And his board has 1 x PCI-e x16 @ 3.0. More than for the eyes.
In your Dakar video, 3.0 and 4.0 are the same numbers. And stop pushing your amud, which constantly has some jambs, especially saving on the bus.
I sit quietly with 3060 on version 3.0. ZERO DIFFERENCES with 4.0. She shouldn't be. I also put x8 in the slot - I did not notice the same difference.
At 2.5k resolution, I don't care about your pcie 4.0 at all.
01001000 01101001
"Why are you throwing AMD video, PROVOCATOR, when it comes to Nvidia"
PCI Ex 4.0 is the standard for Nvidia and AMD, there are no differences!
In your Dakar video, 3.0 and 4.0 are the same numbers.
Are you blind???
And his board has 1 x PCI-e x16 @ 3.0. More than behind the eyes
Ahaha))) I don’t even want to discuss this slag curve! Ddr3 1866 in 2022 is very funny)))
http://www.huananzhi.com/html/1/184/185/397.html
X_ray_83 wrote:
PCI Ex 4.0 is the standard for Nvidia and AMD, there are no differences!
Yeah, except for the truncated tire on the 6500XT and troubles with the 6600. I read the same thing recently, there was some kind of set-up. Nvidia has no problems. I brought a video from nvidia, where the difference is the error on the 3060Ti.
X_ray_83 wrote: are
you blind???
I'm just sighted, unlike you. Rinse your eyes with soap, otherwise the CSF is covered in dust and dirt.
And incredible - 9 frames and 99% loading of the map. And what does forza have to do with it, if we are talking about PUBG, GTA, RUST. This is not a complaint from the author with a quote:
ruster223 wrote:
At the same time, the CPU and GPU are not more than 40 percent of the load, that is, I don’t get anything in a hundred
GO OUT OF HERE ALREADY. You dig finely with your nonsense, and climb where you are not needed.
X_ray_83 wrote:
This slag does not even want to discuss the curve! Ddr3 1866 in 2022 is very funny)))
Buy him another one. Talk a lot, do little. He did not say ANYTHING in the case, from the word at all.
and yet, the game gets its 50-60+ frames on this old man. There will be no miracle. Just change, period. And what does DDR3 have to do with it? If the percent is weak, no memory will save him. Here is a 1600 ryzen - an office gag, does DDR4 3200 C14 save it? no.
01001000 01101001
Yes, you can see those fake videos, I can do a lot of them!
GET OUT OF HERE ALREADY. You dig finely with your nonsense, and climb where you are not needed.
Do you know what HUANAN used at least once ??? Or pure blah blah blah as always???
And what does DDR3 have to do with it?
SATA 2.0 for this motherboard, even the SSD works like in 2009!
Stop justifying rubbish, otherwise it’s not funny to put the 3050 on the dead Xeon with Ddr3 1800 and SSD sata 2.0.
Here is a 1600 ryzen - an office gag, does DDR4 3200 C14 save it? no.
Ryzen 1600 is not sold now, 1600AF is a 2600 miracle))) Supports PCI Ex 4.0 at least 2600 at least 2700X
Here is a proof, otherwise you can’t do more than blah blah blah.
01001000 01101001
hello. Will replacing the processor with a Xeon E5 2470v2 help? At least how much will change the situation?
01001000 01101001
Regarding "buy him", it seems that when buying, there should be an understanding that the new video card does not work well with old hardware, especially Chinese used Huanan! There are already like 1000 vids "DO NOT BUY HUANAN" and they all take this rubbish, it is not clear what it is made of and then whining either bios, memory, power, etc.
ruster223 You take a
Ryzen 2600 and a motherboard like b450, everything will work there and huanan in the trash or you sell it! This is a headache and not PCs do not do this in 2022.
No one here will give you answers to the problems of the motherboard because it is random and with any variations.
hello ruster223
. I'm worried about a bunch of corn kernels and threads. 8/16 Xeon E5-2450
v2 should be cheaper, but much more bouncy in terms of frequencies. Up to 15 percent per core, but this is synthetic. Like in games, who knows. You definitely won't solve the problem. You know, I'm still worried about the power supply of the board. Make sure there is no overheating. And then I see there are no radiators, forced cooling is the same. How is he doing there.
In general, googling. And don't expect anything special. Consider, already received the maximum. Such a platform.
It's a sad investment in my opinion. If only with a small surcharge. It's a shame to invest in this at all.
Here's something else. Turn off hyper threading. Should raise the scores.
01001000 01101001
yes, the system was assembled more than two years ago for 750ti simply, and everything was clear with that. but it pulled me in the carousel to buy a 3050 for myself and this is such a topic) thanks for the advice, can you suggest components for the future system change? something based on the i5 11400f, mother, RAM, so that he knows what to save and take in the future))
ruster223
The video card is always taken to the maximum. Did everything right. Proc / memory and board will be changed later. I don't know which country you are writing from. In the Russian Federation, iron is a kapets now. You need to look at Ali, compare.
Now: 11400 I would not take. But you can. I myself chose 10400, the 11th series has an emphasis on working applications. RAM overclocking is very sad, as is the work of the controller. 10400 is enough for you. 12100 to 1700 and B660M as an alternative.
10400 / 12100 don't need a rich cooler, BOX is enough. Series 11 has the same norms, then I would not take a board without VRM cooling! Limits can be removed. The same MSI B560M PRO VDH.
Actually, it's hard to guess. Especially with the current situation. Take the 12 series intel (12100 / 12400) as a minimum. But against 12400 already now 5600 will be cheaper with aliexpress. Those. Intel has a 170 socket. AMD, AM4 have everything, in the end. But there 5600G / 5600X / 5600. I would not take 1, 2 and 3. Moreover, the prices for them are inadequate, even against the background of the old man 10400, which makes all their options 6/12 (I say, as someone who compared 3600 and 10400). A cooler box for 12100 / 10400 is enough. For AMD 5600 / Intel 12400, take the OEM processor and cooler separately.
Take the memory level goodram iridium pro 3600, A-Data XPG Gammix D10 3000 / 3200. Ideally, find Crucial Balistics 3000 / 3200. Even better - Samsung. The rest to see what's available. Just not the Kingstons.
Motherboard - MSI B560M PRO VDH at least under 11400, with 10400 with the possibility of overclocking memory. But the 10th series is less voracious, there a radiator for BPM is not required (only for an upgrade). If not, the H510 is cheaper. At 1700 socket 600 series - M take the minimum, how much money is enough. The fees are expensive.
AM4 has B550M S2H / DS3H. MSI tomahaw upgraded to 8/16 if needed. AMD 6/12 requires a cooler.
Something like that, by the eye. But with current prices, I don’t know what you want at all, if you are ours, of course.
The very minimum you can take is 10100F. Even he can improve the situation. Next is the 10400F. Look carefully at the fee that you take. If the B560 memory overclocking is not a problem, then the H510 focusing on the processor frequency will be.
01001000 01101001
Regarding the Chinese 2011, here is a video, a new one goes into the blue screen in Cyberpunk2077 hahaha)))
Oh, how you like to invent. And compare really budget hardware with branded, even more nonsense.
I also "invented" this video about "DO NOT BUY HUANAN" ??? In the end, the master for such you says that everything is old there)))
10400F is even better than 3600 ryzen
There is no PCI Ex 4.0 outdated slag your intel!
The owners of the Juanans are notable millarders that take them from nothing to do
And play "blue screens" instead of games ahaha)))