my VK after an hour of RDR2 GPU 80 ° C and memory 82 ° C. it's all al.radiators that just lie and are blown. maybe...
MOSHIVURIA lapwing
Access to a 3d printer has appeared. There is an idea to print a new casing on the video card in order to fix the fans normally, and not on clamps, and so that the video card would look neat. Make it according to the principle of Asus 3070 noctua edition, only until the hands reach it.
sevapva
The whole difficulty is that the model needs to be made for printing, and I'm not particularly strong in this. In principle, I know how to use the 3d compass, but so far there is not enough time to figure it out.
zPOINTMANz
You can still make money on a 3d printer, in short you buy a lot of gt 1030 and on a 3d printer you create forms for the backplate and casing rtx 3080-3090, fix them on 1030 and sell them for 150-200K! :)
zPOINTMANz
Where can I get such a printer, and learn how to use it correctly!) Although the experiment was successful with the video card, the third valve, which did not fit into the line on the card, looks like a collective farm, located on the second turntable from the top))) Well, yes OK. Luckily the temperatures dropped a lot. The GPU heats up from 57 to 61C, very rarely 62C, basically the value is kept at 60C. And the video memory is not 94-96C, as before, but 66-68C now. As a result, I overclocked it right up to 20500 MHz. How can I imagine that I will have to return everything to its place when it's time to sell the card !!!
Kartonkratos
Mooooooo)))) Buy 1030, and put the casing, for example, from 3090Ti and sell for 200 pieces! 5 cards and already lam arrived!!!!
Kartonkratos
is such a normal income for dibils))) given that the quality of the casing is from a 3D printer. complete shit. and anyone who takes such a vidyahu in his hands. immediately throw it on the floor and vomit)
