Optimization (The Bureau: XCOM Declassified)

graphon 95, optimization horror is simple

RageWarrior
, I used to think the same way as you, until I myself encountered crooked cracks.

I play on max, with all possible anti-aliasing and other physics. I don't experience any problems. Second lag, only during autosave.
I7-2600 3.40 GHz, ; RAM 8GB two gaming 4 each; ZOTAC GTX 580 1.5 GB; GIGABYTE GA-P61-S3-B3; Win7x64

There is no optimization! Playing well high with medium anti-aliasing produces 22-31fps on AMD A10 4600m. 12GB RAM. Radeon HD 7670m 2gb + 7660g, although Bioshok Infinite gave out at least 45 on high, and the engine is the same

60 fps gtx 560 ti intel core i5 2500 8gb ram

I played in the evening, terrible graphics, clumsy combat, the color scheme is finally harsh, and most importantly the brakes ... on i5 3570.8 operas and Radike 7950 it sometimes slows down shamelessly, although cruise 3, for example, on ultra only goes on the way.

demon323 devourer47 Did you
try
to turn off reflection in space?

devourer47 demon323 Did you
try
to turn off reflection in space?
PHYSX did not try to turn off:)
On my bucket, everything is at max, except for "Reflection ..." - 40/50 fps.

I set everything to the maximum, it works fine, but the battle starts, the fps drops to almost 10 and after the battle it doesn’t increase either, it’s worth loading the safe after the battle and everything starts working normally (i5 8GB of RAM and 650m

OMG at max except physics 15 fps. Crisis 3 on max was 3 times faster :D

a problem in physx with sagging, in one place some kind of tissue developed, and with it turned on it slowed down, looking at this place, apparently in battle because of this, although other games with it are not dumb :( by the way, a new version of it has been released, with a beta driver, though for some reason I can’t find it separately, maybe with an update, all the lags will disappear)

Fitterr
With physicists, only the Radeons have a drawdown, because it is processed by the processor (the percentage must be good), and not by the vidyashka, like giraffes.

SaintCorsair Physiks
chopped off, i7 3770 percent, video 7870 x2 ala titanium. Brake pipets. Most likely, the physicist did not pass out.

sspik
I don’t know why such troubles, on my computer x4 hair dryer, 8 GB RAM, gtx 550 Ti with physics everything is ok, but everything is very bad with reflections)

3770k stock, Radeon hd 7970 3Gb Ghzed, 8Gb ram, 1920x1080 ips.

I turned off the physics by itself (since the amd card), everything else is at max except for "Except for reflections" 110-120 is stable, with reflections everything is bad 50-60 fps.

But the saddest thing is that if you turn on vertical sync, the toy goes exactly to 30 FPS, and if you turn it off and set it to 60 (120) FPS, then image gaps still remain, although they should not be.

during the second large-scale xcom operation (where to find a plotter), half of the map worked fine, then black artifacts drove in the car park with a sectoid robot, and in the end these black divisions turned into a black frame and so on until the end of the mission, then the spots in the xcom base became appear partially. game bug? saw who?

SaintCorsair ATP
, turned off damn reflections, everything is at max + anti-aliasing and physics, I didn’t measure it with fraps, but subjectively at least 50 fps

statickable I don't know, with Vsync turned on, everything is fine, I set the fps to 120 ... In general, with this Lag Reflection turned off, the fps is around 75 plus or minus 2-3 frames, the rest is all at max + physics ... System on i5 3570 and GTX 670 2gb, 16 gb ddr 3

And now one question torments me, is there a noticeable difference in graphics with and without reflection on ??????? The game is just not even very bad, and it’s kind of a shame that the machine is far from weak in principle, the graphics in the game are not outstanding, but damn it, darling is not calm ... Well, I can’t play when something is not at max (Feels like I’m playing a game I see not in full, these are the troubles in general

PS I'm downloading the Black list, let's see how things are going there)

updating to 326.80 version of giraffe firewood, significantly increases performance, at least with physics almost no lags, I have

777ept
I have a weaker system, I play everything on MAX and have seen at least 38fps, an average of 50. Or is 38 no longer playable?

And by the way, can anyone explain what this Reflection is responsible for? You can't see the difference...