DartMaul
Strange, but I have at peak load produces only ~3,6 - irregular ~3.7 V and the BIOS in the overclocking tab, all locked (bus, multiplier, voltage, etc.) are only open a couple of tabs such as Speed Step and all mine. And just for fun - at ECS H61-H2 at all possible acceleration?
DartMaul
Well, I'm still an overclocker-a lover, not a Professor (nitrogen, dry ice, for me it too)) And collect the water with the hands in parts (waterblock, pump, radiator, tank, liquid, hose + sensor even circulation of gold out, and we are hard to get..and the unit would need a full tower most likely, it is clear that the efficiency of this system will be much higher, but I don't want to bother
danene
I don't know how your BIOS is called, but the bottom line is that you need to put overclock mod for a manual transmission, then it will be possible to manually change the settings.
propeller-faust
The man who does the overclocking for every day, even not overclocking. So do many users.
To get a good H2O loop pain in the ass of course, but it should be done 1 time, and use then can be years. And Yes, it really is much more efficient.
DartMaul
Thanks for the help, but unfortunately there is nothing like that, only in the memory tab, sorry for the trouble... Maybe will alarm when bought new mother, and along with the ssd instead of the victim)
danene
Look again closely, I'm pretty sure that Board has the ability to manually set the multiplier. More you in General is not necessary.
DartMaul
I understand that you have a shield that I'm not paying attention, or perhaps stupid). Is standard sichrovsky Detsky BIOS, and tabs associated with the acceleration just inactive) 2 only, ie if I disable intel speed step there is only 2 tabs bus and multiper, only 2, and they are inactive... I came to the conclusion that this motherboard simply does not support overclocking or it is blocked because of the instability, the departure of the BIOS, not the quality of the power part of the motherboard and BIOS this sew they are all low end boards. Elitgroup such Elitgroup....
danene
In any case.
Just better to check 2жды)
The motherboard of course circumcised, God knows what it was deprived of.... But in any case, on another motherboard, you can easily get 4.3 GHz from your chip.
DartMaulСпасибо, in principle, that's what I wanted to hear) again, I apologize for the molestation, and anxiety.
It is possible to take GA-MA790XT-UD4P cheap, but she's got the power 24+8, and I have 24+4(((( will it work? and does it unlock cores CPU? If Yes, can razlicita percent, which is the next Mamma razluchila?
Vignoni
The last question I think I can answer: and be Able to clearly razlicita in the same.
Vignoni
Are supported only 24+8 pin, 24+4 pin power supplies. on nikse it is written. And somewhere I think plus presence of 8 pins instead of 4.
motherboard under FX-6300 / FX-8350
advise inexpensive (cheap)
prices: http://catalog.onliner.by/
burned the motherboard to help find the right processor amd phenom hd 91000bj4bgd
Hello.help Board.bought the motherboard AS ROCK Z77PRO brought it home,installed it.the computer does not start.the next day took it back to the store,the seller I took it, and took much to herself in the back room to check,then came back and said that I had bent the POWER SW in which the wire is stuck from the system unit.and supposedly it's not a warranty case.not exchangeable and not return the money.offered to pay for examination said that there will look no less than a month and that most likely deem me guilty of what I bent.