Morrowind.ini (The Elder Scrolls 3: Morrowind)
With a detailed description through // each parameter.Where to get poke pliz.
I have a question - how to set up the Tribunal,if I drive with him there,but there are files .top.bsa.mrk.esm to him.I installed the original Morrowind + bloodmoon(both from disk),record the tribunal.bsa in the ini,but when loading a lot of errors, such as can't get wheat chunk size and other blah-blah-blah,but when initializing the data, the game crashes.no one knows what to do?
Etherella 05.07.07 02:45
Here is what I have in morrowind.ini
[Archives]
Archive 0=Tribunal.bsa
Archive 1=Bloodmoon.bsa
[Game Files]
GameFile0=Morrowind.esm
GameFile1=Tribunal.esm
GameFile2=Bloodmoon.esm
Naturally, all mrk, esm. bsa, cel, etc. needs to be close to those of amadana.
Eglantine 05.07.07 02:36
Slow where there are many Persians, many objects to render, etc. it's all to guinebretiere (and the intelligence of the Persians, too). So see FreeLancer 05.06.07 11:02 how I escaped on low comp. And another tip: don't sit in igruhe for a long time. Half an hour and parasakti. All will noticeably accelerate. Especially if a lot of locations to visit.
Every time I run a distance equal to the length of the city Eldruin - proishodit uploading location (or a new unit card) that causes freeze of used Morra. It is very annoying when the Persian great speed.
What settings need to change in INI file to Morrowind increased the cell size of the map that it loads in memory consumption?
This should change the distance at which you will be uploading the next cell location.
As I understand the settings
Interior Cell Buffer=10
Exterior Interior Cell Buffer=10
increase the number of cells loaded into memory but their increase does not affect the brakes...
How to increase Cell itself ?
after the installation of GFM, the screen began to twitch when you change locations (when there is a strip loading), pressure on the eyesight. it is to be treated as a thread?
If I understand correctly, we are talking about moving to another cell on the surface, not the interior. For example, when moving from Vivec to the area Ascendancy Islands.
've seen this, and if you press forward during loading. But rarely.
You can play with the Morrowind setting.ini (section General):
DontThreadLoad=0
Try to replace 0 to 1 or Vice versa.
I do not remember, but told me that when some of these values, the game may lose stability, falling on the Desk.
Now I will understand) I Have in the tavern, Darius is in the warehouse, more than 500 things)
There is still the question: how do I enable screenshots? he th-there writes about the ini file, but I'm not very good yet spoiled)
there is a line
Screen Shot Enable=0
Screen Shot Base Name=ScreenShot
Screen Shot Index=0
menees Screen Shot Enable=0 Screen Shot Enable=1
key for screenshots 'F12' (default)
only in your case(if the window is still external) is better zaskrinit print screen and save in Pointe=)
And screenshots em I just in the game to do. I have it, by the way, using PrtScrn that wrote, and not through F12. Em he through both can do?
UnderTheSysteM
Mora manages to brake even on more powerful machines)) necessary to optimize)
Print screen is a system the(plus takes the picture only in the buffer if did not cochranes the picture will be gone)
The F12 inside the game, is created and stored in the folder Morra)
About screens: just he and F12 and PrtScrn requests to register in the ini-file, I thought maybe he's with both buttons saves the screenshots
And how can you optimize? And lag - your Granny...
just he and F12 and PrtScrn asked to write in ini-file
So how do you tell the Sniper said. PrintSсreen will work for sure. And don't be a dope head with a commercially released to help streamline, trouble than it's worth.
Failed to load cursor: Meshes\cursor.nif.
Meshes\cursor.nif cannot load file
Gets this error when launching the game.
Used to play on old laptop of ASUS, Sony Vaio now displays this error. And on the old laptop the Meshes folder was empty and everything worked.
Help pliz...
StalWart
Version of what? Pirates? If Yes, then the reason for it. If by 1C, how much Addons cost? What plugins? Check how they are connected. Maybe you forgot something somewhere to write, suddenly there is triboulet. Using old saves, but with the new plugins? And it can also be the cause. In General, tell more in detail that is how it works(well, worked...), which version... So you just can't say anything specific, because too little information...
The licensed version of 1C for 300 or 350R add-ons no not worth it, as well as plugins. On both laptops the Meshes folder is empty, but on the VAIO it says that it needs to be a cursor file.the nif, and on old Azusa everything works without that file.
I can throw this file in www.slil.ru?
you're saying you have a folder meshes empty???? I have this daddy weighs 500 metres))
if I'm not mistaken Morra can work in two versions, the first is used when conventional texture files in their formats and which lie in respective folders, the second - work with archives in which sewn the texture files(the file with the bsa extension)
in the file morrowind.ini you can set what to use, or find procu raspaculo bsa files)
edit
look in the ini file the following lines
[Archives]
Archive 0=Morrowind.bsa
Archive 1=Tribunal.bsa
Archive 2=Bloodmoon.bsa
if just a Morro and all that
[Archives]
Archive 0=Morrowind.bsa
the only thing I don't remember is whether it is necessary still where that to register or not...
[*]
Profile
Dimming
Estimated games: 0
Reputation: 0 [-][+]
[Insert the name of the author in the form of Fast response] [Select the text, click on this button and the quote will be transferred in the form of Fast response]
Re: Questions on Morrowind - 8 (Response #909)
Today, 00:57
All forum good day.
Guys, I see my question isn't off topic, but I need branch not found. If badly searched - poke me, please
The problem is this: Morrowind (localization of Akella/1C) on my machine the order inhibits. My configuration: Athlon XP 2200+ 1.8 GHz, mother Soltek 75FRV, card GeForce FX 5200 128 MB, memory - 256 MB (plus swap file of 1 gig) sound - Realtec AC'97 (integrated with motherboard), axis - Windows XP Pro+SP2. Delivered the last fire wood on video and the latest version of DirectX from the Microsoft website. Iron did not seem quite so dead, but the game it goes smoothly.
Morrowind.ini edited (though probably not _), FPS Optimizer 1.96 version and used (but still stronger slows down the game - I admit, fully admit that my curve settings). The game shows mostly 15-20 FPS, often dropping to 5 for a few seconds, that the open locations is very noticeable. Though the game is basically a side, what video settings exposed: playing for the minimum, but it does not help. Of course, all other applications, including antivirus, from memory unloaded. Even tried to give morrowind.exe higher priority medium or high - again no effect.
The plugins are mostly a re texture, GFM latest version installed Tribunal and Bloodmoon.
Very big request: tell us what you can do to speed up the game on my machine? Want to play at least on medium settings without continual delays. Setting FPS Optimizer'a, ini file settings, graphics card etc - I will be glad to any good advice. Help, who than can
PS: by the Way, there are regular stutters when switching to next music track in the game. Somewhere met a mention that the owners are bad sound cards is to reduce the sound quality, so as not to burden the memory, but I don't know where to do it. In the game menu to change the quality of sound is impossible. Anyone can help with that?