Housing: discussion and choice of v.3
In this topic we select the system block.Previous topic
MunchkiN 616
MunchkiN 616 wrote:
its meaning is to mount its housing and enter all graphics cards
element V Nvidia edition is just the same produced for SLI and 3-way SLI configurations. Here I have included even special. cover-the sleeve is separate and just bomber capacity cooler that weighs probably a pound, and when I plug it in to see how it works - so it's just kind of turbine, not a fan, he made the blind to tagnotes a meter to the side and I lost balance and fell to the side, because the maps were. All this stuff is done just the same in order to effectively cool the 2 or 3-way SLI configuration, including the Element V is MORE suitable for the heap of graphics cards than some stupid gray box
MunchkiN 616 wrote:
and so a thick steel or glass org. all the cool elite.
and here's your fucking glass? Case this is not a Museum and not a jewelry store to me staring at it tirelessly. The body is the BODY. And it needs to effectively all cooling base fans. Otherwise fuck such a body need
MunchkiN 616
MunchkiN 616 wrote:
from the point of view of the ability to the price of the Corsair Graphite 780T
looked at him - basically a cool, but too some kind of pretentious. Plus no fan on the side cover, and it already does not roll, Fucking glass nobody wants, you need sensible cooling.
MunchkiN 616 wrote:
Aerocool Provided Below
this is something closer to the subject, Yes, funny. There is a top 200mm fan and the side 2 at 140. Well, there is a front/rear fan is already a classic. Not that funny - only ONE top 200mm fan mounts for a second there. Side somehow not normal shirokolistnyj fan, and 2 some mileuski that absolutely not will you to drive large volumes of air. And how do they connect to the power supply? the wire from the fan goes straight to the Board? Or is there some intermediary that connects to the lid and from the lid there is already a contact plate by the housing, to avoid this, saying that I open the lid carefully and still have all 2 of the cooler be disconnected from the motherboard, otherwise if the lid blows and all the wires explode with her. There is not?
Vinni-Pukh
Vinni-Pukh wrote:
I'll reveal the secret, on a normal Mat boards for a long time all is adjusted and set curve speed.
I know that. For this you need a program, it needs to swing, to learn and to watch th there to change, to change the speed of the coolers. And it's a real BUMMER that I extra 500 rubles extra, but I have adequate control fan speed on the case, and one click on it I can do more and the backlight housing to change. Blue, green, red - all wheels, anything from the total texture is not distracting.
Vinni-Pukh wrote:
To assess the case for 160 mm cooler, you go to specialized sites and look
Body large? Yes. The volume of air in it is heated large? Yes. In order to expel them and to drive new need bigger fans? Yes. Little fans can handle it? No, they are too small for such large buildings the amount of drive air flow. More questions?
Vinni-Pukh wrote:
Kapets. You main argument is the lack of a fan, hahahaha.
You the beauty of the body define the side fan ?
And I sahrana is adequate fan GLASS? What the glass rides the air?
And I'm not beauty of the body were selected, and the degree of cooling, to me beauty was a damn brand, I have a graphics card that dies from the heat, so the body had to take serious and cold.
Vinni-Pukh wrote:
I'll say it again, in this case ( which I suggested as an example ) blowing in 2 times more efficient than yours.
due to what? Your WINDPROOF body SIDE WALL through which air enters and comes out. Accordingly, the entire heat should be given UP. At the top of the housing in the normal configuration there is no fan at all, although there you can put as much as 4 120mm cooler. .... Why? Why not just 2 big heavy fan? Why do I squeal at the top 4 120mm cooler? Plus they from top to be a thin mesh, there's nothing heavy will not put up all at once bend and break. Now I have 1mm punched steel, it is strong, reliable, the cat even jumps up to sit. In your case you ALREADY have one, potentially, to the emergency place, and it's a minus.
Then I went to mount fans on the BOTTOM. .... why? Case that on the ropes will hang? He will stand on the floor, as he will breathe, he's going to BLOW, if he is on the ground?
Further. Here is the lid, which opens to us the access to all connectors - she just bent down as if to open. She ... plastic and in the open position hanging plastic nozzle, already one wrong move hand or foot and the lid will just break and not strapped in. Again, another place to crash. Here you have the entire body of an emergency of some sort
Case dimensions - just merciless, it's just a GIANT COFFIN, which has absolutely zero mobility. Weight - 22 kg. I Have a whole 14 kg with kompaktowej that it is hard. And you have 22 lbs. yeah, you come out with such bandura. And if you have to go somewhere and housing to bring? I will immerse into the car, but you no, he's not just any car will. On Yandex.market one this is what he wrote - he was waiting for the right taxi for 20 minutes, because it's not a box. and the COFFIN. And for this kind of coffin you want to put a 120mm cooler?! Yes, it is 200mm it will be a little!
KingBaby
Question 2 - how old are you. Why did you change the housing. Without those answers no one will help you
Civilized
here is a case with a side fan more or less normal size.
And then on the small side, twice more.
Spoiler
Civilized
Civilized wrote:
I know that. For this you need a program, it needs to swing, to learn and to watch th there to change, to change the speed of the coolers. And it's a real BUMMER that I extra 500 rubles extra, but I have adequate control fan speed on the case, and one click on it I can do more and the backlight housing to change. Blue, green, red - all wheels, anything from the total texture is not distracting.
I'll reveal the secret, but don't tell anyone, okay? It is easy to do in the BIOS-e, no need to download anything, Yes. Count?
Doing everything in three clicks
Civilized wrote:
More questions?
And what is ventilation ? What would fixies live well?
Well, you'll get 1 degree Celsius from the CPU, then what?
Civilized wrote:
And I sahrana is adequate fan GLASS?
And what's the glass? Tons of premium buildings with a metal lid.
Civilized wrote:
I have a graphics card that dies from the heat, so the body had to take serious and cold.
Max you have, there can breathe from the heat, it's a reference GTX 480 with a hellish acceleration.
Civilized wrote:
At the top of the housing in the normal configuration there is no fan at all, although there you can put as much as 4 120mm cooler
and?
Civilized wrote:
Why?
Explain, if you do not understand. Thing is, this DLC. It cools the CPU much better your side.
Civilized wrote:
there's nothing heavy will not put up all at once bend and break.
Well, Yes. How many owners of these buildings know, it weighs on top of the three sectional dropsy, nothing caved in, you would have caved, Yes.
Civilized wrote:
Then I went to mount fans on the BOTTOM. .... why? Case that on the ropes will hang? He will stand on the floor, as he will breathe, he's going to BLOW, if he is on the ground?
Well, you understand, right? Well done.
Civilized wrote:
Further. Here is the lid, which opens to us the access to all connectors - she just bent down as if to open. She ... plastic and in the open position hanging plastic nozzle, already one wrong move hand or foot and the lid will just break and not strapped in. Again, another place to crash. Here you have the entire body of an emergency of some sort
Oh, I don't even know how you body use.
Civilized wrote:
This pitch table. He stands on the table. Want to drive to the girlfriend in obaku, buy a laptop.
Civilized wrote:
On Yandex.market one this is what he wrote - he was waiting for the right taxi for 20 minutes, because it's not a box. and the COFFIN. And for this kind of coffin you want to put a 120mm cooler?! Yes, it is 200mm it will be a little!
Lule, this case in any hatchback will climb about than you? Or follow him on the mini car arrived ? So in a mini car, not everyone will come.
Bomber
children and students always suffer winding from one extreme to another. You either do NOT have the side fan or it unimaginable proportions. That's why you will never find the Golden mean, you have your whole life will be neskladushka.
Vinni-Pukh
the right, I don't know dude, your arguments are more and more lose gravity and rational thinking. I found the perfect man, I am immensely proud of that pile of shit was able to find the diamond. And you can live with their COFFINS as you wish, and place them at least 500 120mm fans, a million. It's your problem, not mine.
the side fan and not too nuzhon
I taped cardboard peck-peck in salmane Zet 7
the upper and lower blowing not too nuzhon as it stuffed a lot of dust.
finally 90% of the systems will be pretty passive open front with a filter. in a pinch, you can insert a quick fan but my pitch to all experiences, it does not affect the temperature even in confined enclosures with a giant divisive iron.
in particular how I managed to hammer in KORUS 2006 closed year of hell 2 turbine map and Kohler master V10 which is all there covered and clung closely to the PSU. one card is still good but 2 sucked the air out of the case. basic Zet 7 sealed and disconnected the front fan, nothing like this happens.
Civilized wrote:
And you can live with their COFFINS as you please
I do not have a case as I did. lol
MunchkiN 616
MunchkiN 616 wrote:
the side fan and not too nuzhon
Child does not prove.
Vinni-Pukh
Vinni-Pukh wrote:
The child doesn't prove
Don't know what a sick fly you here bit you sharply to see a black become white and white black, but this GLASS is NOT TOO NECESSARY! A fan with blades up to 230mm is a very serious help General hull cooling. You can do it for blowing, and can be screwed around and he is already working on blowing, personally I have the temperature of the components below, if you set the fan on BLOWING and not blowing out of the case. About the temperature component is not a couple of degrees. This degree 7-8 from complete set below. Even when I just removed the marginalia left the case open, i.e. fully direct access of air - the temperature was HOTTER than with the fan! About how! Ie even if there is cover, but turns the fan - so it will be cooler than if at all to take the lid off and clean, let in the summer days. Well, in General this is a General lowering of temperature throughout the volume of the housing. Including think comments here are excessive - side cooler mandatory period.
Vinni-Pukh
about cooling, you probably did not understand me. Here is my case Element V Nvidia Edition. The front two 120mm cooler and one 120mm rear. Healthy on the side 230mm. Top in the base was just one 200mm, but then I bought the exact same second, 200mm from Moscow ordered, however the original tank cooler has the technology ColorShift, i.e. it changes colors, blue, green, red, flickering and so on. Second 200mm I bought exactly the same, but of course it was without this technology, it is just a basic cooler of the same model as on the body, but not proatherogenic, glows he's a normal blue. Fan by the way here is a
It turns out that in my case 6 coolers, 2x120 front, 2х200 top, 1х120 back 1х230 side. Plus put back two 50mm cooling solution on the level of the graphics card, there I have a rear perforation allows you to do it, so they just hot the video card and practiced, the air near the video card sucking in full. And they really suck on full, the hot air flow that these two 50m m cooler do direct the stove and blow out. A healthy 230mm leads to a new body already cold air. I.e. a COMPLETE replacement of the hot air on the cold non-stop. Oh and the processor I have a copper radiator with 120mm cooler. He sucks directly from the processor, and this hot air is then directly exhausted 200mm fan on the top, you know, the processor of the roof usually is, that there is obtained a stream of hot air. And healthy again 230mm side fan provides the CPU the NEW cold air. Including, in principle, everything is logical there. All the wire in the rear wall of the housing is located, including the air currents do not interfere.
PS Oh, forgot to add that the case was the sleeve for 2-3 SLI configuration with a healthy 120mm turbine. That is what the TURBINE, and not the cooler, because the cooler just modestly softly blowing, and the wind turbine will satisfied with a real hurricane, it tears and blows everyone and everything and power flow, I think it exceeds even the normal room stationary fans, the papers from the table flew away from me metres on the 7th, and I'm not at the table was at the time of connection of the turbine, and on the floor at all tinkering with the case. Including turbine, I have not yet installed and you do not know what yet to do with it sensible. But it's there and it works, and it can be put in and then I already fear for the components themselves, that there are not any wire off the wind and flew off to the thread to Haram from the housing. About the dust and say nothing, it is not something that the Board she even fly up in no time, as it will make outside the case of this turbine
KingBaby
well then come into the store and see what they have for sale, ask about Full-Tower case, but not too large, and that was stylish and coolers a fucking cloud. I'd recommend my thermaltake Element V, but it will not find. Really ask the store about Thermaltake Element V, maybe somewhere in a warehouse there, to bring to order. They have the Element G, Element T and many other elements, but I don't know if they sell now. My recommendation is Thermaltake V Element or other element to choose from.
KingBaby
So I right now found an Element T for 5200 rubles. And if you look attentively, you and G element to find. Or poryskat, enjoy the shops, posprashat sellers, I do not know, do th thread, rise from his chair. Under lying stone water will not run. Looking for shitty, anyways.
KingBaby
if you have in the country is not the most ordinary buildings, that we had to start. And no one can help you then. And even then you don't nzhno to write to the forum
MunchkiN 616
MunchkiN 616 wrote:
in particular how I managed to hammer in KORUS 2006 closed year of hell 2 turbine map and Kohler master V10 which is all there covered and clung closely to the PSU. one card is still good but 2 sucked the air out of the case.
Its tapered outer pressure?
Bomber
no, it was about the same that hold the cleaner by hand and the cards on 100% turbine-powered without load flushed to 90 degrees. while in search mode in the region of 50-60 degrees indefinitely usually was. that is, I came to the conclusion that the pressure in the body fell and the blow was not effective. if I sat down to play when reaching 70 degrees they would also roared in the time it would have overheated.
I Pitch calculated at 4 tubino the Radeon and the performance of each under 4000 rpm min and it creates a noticeable exhaust thermonuclear jet there you can blow away I nuzhon the spacious body with a wide bell of Sosa like a car.