Housing: discussion and choice of v.3

Gufy777
AeroCool V2X so I can advise well, I have he had been, but now on a more dorgem sitting, but that was normal. Although there is in appearance and color as anyone, can't say. he's a mega slot cert, but trust me, in person looks better than the picture. And about the flow , the kit 1 is, but is there somewhere else to annoy. Check out the best of themselves.. So some help

ministr-s
I'm not saying that the cooling is insane, it just may not be enough if you want to cram a very powerful, perhaps even a top iron, for this you need a really powerful cooling!
And for middling to some 1060-Oh vidyuhi it is more than enough))
I was extremely pleased with the presence of wheels at the case of comrade D1_, however this is minus the case on the table themselves, and not deliver;)

Gufy777
Zalman look different.
I have Zalman Z3 Plus. Not to say that he looks something special is different, but for the money it is a normal solution.
Blown it very well, despite the fact that to buy turntables don't have.

Major drawbacks: high enough coolers there will not fit, will abut against the transparent side wall.

Bakuman wrote:
maybe even a top iron, for this you need a really powerful cooling!
For me it Deepcool Baronkase Liquid White and with the powerful hardware can handle it,though if there is not enough there is space for an additional fan on top, front and bottom, though the set is not bad ITS is, I think this still will be enough? and about the wheels, something intently, it seems there legs normal, not?

OkGo wrote:
Zalman Z3 Plus
No offense, but modest looks. The viewing window is small, there is no opportunity to flaunt gaming hardware. The front panel mesh, to the eye in design nothing to cling to. IMHO, even just in the proposed design loses Deptula.

The design of the Zalman would agree it is impractical, deptula it seems like practical, but at the same time very unusual and this case is perfect for modding, although it without modding looks quite cool and a novice to the gamers will surely appreciate;)

Winter_Wind
Looks, perhaps, but with cooling and everything is very very good.
Here it is man to decide what he needs. He also pointed out to both.

Gufy777
Gufy777 wrote:
Hi all. Guys, advise the case to 3,300 rubles to the well was purged and the appearance was normal?
Specifics would be more. In General, a good standard case for 3K - Deepcool Kendomen Red. Spacious Midi-Tower with steel wall 0.7 mm. If the glands come to yours, I would take.

Allinos
As he had with the purge? Iron at me such:
ASRock Z77 Extreme 4
Intel i5 3570K @4.3 GHz
1060 Asus GeForce GTX STRIX OC 6GB GDDR5
Kingston 8GB 1866mhz DDR3
Western Digital Caviar Blue 1 TB 6 Gb/s 7200 RPM 64MB
Chieftec A-135 APS-850CB 850W.

Gufy777
You have a not so hot iron and suggested above Deepcool Kendomen will be more than enough, though I think that you are not even all the fans will cycle, but only they must be properly set to the correct air circulation

Gufy777 in which case now stands? what do sensors show?, some cool PSU on the system, sure all specifications written? there would be on 600 w enough, the stone I agree, not hot, propellers how long do you plan to put in addition?

I think the number of fans depends on how much the overclocked processor and how much he heats up, though, and none under load this is very hot, certainly not as much as blazing, but still. Although I agree with the comments above that the power supply somehow sanoguet, you can take less of it

Allinos wrote:
In General, a good standard case for 3K - Deepcool Kendomen Red
Cool lighting is implemented. Judging by the design, size and slots for placing the iron body gaming. A lot of fans, the control buttons are conveniently located. There is, incidentally and with other colors, highlighting this case. But with the red, IMHO, the coolest looks.

Most important thing of all, allow the device to fit the graphics card, and ideally 2, and there is enough space inside for comfortable cooling.
Lighting is certainly cool, but it is not the deciding factor when buying

Well, a first look at the appearance, and in most cases in the modern housing all the hardware fit, of course, about the 2 video cards need to have to pick up. Here's an example deepcool genome rog how to become vidyuhi, and not a little

Bakuman wrote:
Most important thing of all, allow the device to fit the graphics card, and ideally 2
Most importantly for whom? Everyone has their own aspirations... Kendomen standard dimensions for vidyuhi more than enough space. Lighting - sometimes the only thing that distinguishes the case among peers. And for most of the design system unit still significant.

Yes for most, as is usually the case choose according to what length video card would fit in there. I've seen a bunch of interesting body design, but they were very small in length and more or less normal vidyuhi there will not be.
By the way, how do Kendomen the case with cooling? The air normally circulates inside the case?

Bakuman wrote:
but they were very small in length and more or less normal vidyuhi there will not be.
By the way, how do Kendomen the case with cooling? The air normally circulates inside the case?
Have Kendoon dimensions: 491*200*486mm. Compatible with graphics cards: 310mm (here focusing on this, you can try the graphics card). 5 pre-set valves of 120 mm radius. Should be purged normally.

310mm is the normal length, the top card should be placed only if it will not have any specific cooling, which will require an increase in its length. What should be purged normally, that's understandable, but I am interested as it is generally implemented in fact, and maybe even get that 5 fans for cooling much?

Bakuman wrote:
What should be purged normally, that's understandable, but I am interested as it is generally implemented in fact, and maybe even get that 5 fans for cooling much?
And for me it is not clear what You mean by is implemented in reality. Two fans on the front panel to drive the air inside, equipped with a backlight. Two on top are working on blowing. The rear, too. Judging by the reviews, install additional valves in a practical sense.