Configuration control (steering) (Need for Speed: Shift)

the wheel virtual no lag, just not rotated to the angle by which the rotated real. The same thing is in TDU

this is called nonlinearity....removed setting....on the contrary I do to lower the wheel to turn....

Almondo
the computer I have is rather weak, but that's not the problem. synchronization of virtual and real, as such, no rudders at all. in TDU it is, in GTR it is, Shift its gone. I course it can be used to good (for GTR that is), but my opinion about the timing Shift is unlikely to change the linearity not to twist.

...the synchronization of virtual and real, as such, no rudders at all.
No - not missing. there's just one small caveat. In order for the wheel of a virtual (display) and games (which twist) turned the same way, you need to set the settings neutral linearity. Ie in the settings control the Sensitivity of the steering wheel (although in this case, is the parameter of linearity), to leave 50% Now the actual thing: the fact that this setting only works in conjunction with the setting of Reduced. the rotation angle (for quick tuning) or geometry > the Rotation of the wheels (for advanced mode tuning) i.e., for the neutral the linearity, it is necessary to do so:
- In the control settings: steering sensitivity 50%
- In the menu of tuning: (for the above items, depending on what tuning you use quick or rasshirenniy) 100% (faster)
In fact, it gives not only the visual synchronicity of the rudders, but absolutely adequate management... many Simply do not know the subtleties of the (by the way. still went with Pro Street, where the sensitivity settings in the menu rudder tuning the suspension, was implemented to configure the handling of the machine when using the keyboard. For owners of the rudders, the Value had to be set to 100% (this topic has been discussed on the forums of Pro street) it is Very strange that this subtlety was not originally described in the README for the game. And Shift, all confused even more.. if I hadn't remembered about this nuance in Pro Street, and went so far in Shift, with the sensitivity (nonlinearity) of the steering wheel in the control settings, the value of 100% But now, all right. And control (taxiing anyway) is absolutely adequate. And visually pleasing, and familiar to watch the wheel on the display. follows the steering movements of the game. There is a small error though, because the dead band steering, which leave still stands, though very small - three percent. And because of the effect of tagline steering at speed, which in turn somehow neoreality chtol.. On the handling of the machine and on the virtual wheel as we see it, and the feedback feel just bumpy no weighting as such.. because Of that speed, the amplitude at the helm of the game, is slightly more than the virtual display. But in any case, it's the little things)

I changed the sensitivity of the pedals by 30% and speed sensitivity at 100% like all the rules wheel Logitech DFP. I want to conduct experiments on the faster wheel or controller. The owners of these gaming devices please lay out your best times set on the standard BMW 3 series to the track in Brandhyze configuration indie

No one can help to solve this problem:I installed this game,the license.5 days played on the steering wheel thrustmaster ferrari 3in1,everything was fine.Yesterday lost control in the game Menu through the steering wheel.In other games the wheel works as before and in this that neither tried in any way.With Claudia in the game Menu, everything is normal.Operating system is Windows7 x64.
Hardware:CPU Intel Core 2 Quad Q9300,MB Gygabite GA-P35-DS3L,RAM DDR2 OCZ 8 Gb,video card Gygabite 9800 GTX sound card SB X-FI Xtreme Audio PCI-E

We can because of the patch?

Alas, the patch has nothing to do with.It started before him.I patch just got rolled.And so I tried to reinstall the game,and control settings to be changed.Nothing helps

Desisexyboy! Here are my settings (names I will not write, just top to bottom):
0%
0%
0%
0%
35%
50%
50%
50%
50%
0
Incl.
Normally

And yet, in the settings of tuning, the geometric configuration:
the rotation of the wheels of 10.00

Steering wheel: Logitech Formula Force EX

Someone set up the optimal settings for steering wheel G25?Just can not seem to set norms,we have to go by default!

and here are my settings for the keyboard,holds the road better in turns (management setup from top to bottom):
0%
0%
0%
0%
39%
38%
50%
50%
88%
0
Off.
Normally

aerobatics :the complexity of the computer light/control model of novice/ABS on/APS/max system.stabilization on/auto.the grip on.

But there is something that the car was not so easy to bring down I play on UPR. PRO(on the wheel), and the complexity of computer easy-medium. But I was very much annoyed when someone to cars to dotronutsya immediately into a skid (this is in the beam case) or just my machine permananet and I can not go. Any ideas what to do what would car Chi ailee to do or that the computer is less than cut?

Good day.
Recently bought a wheel, put the driver started Shift at check-in were surprised that the steering wheel has hydraulics... (including bringing the car to the original rudder).
But after I rebooted the game somewhere everybody (smile), I imagined it? Or how it can be fixed?
Prompt, and then I want the hydraulics to return...
And when the "Dead zone" = 0 the machine like a sausage on the road...
Genius RV FF (witch last version drivers)
Thanks in advance.

This is mine:
2%
0%
0%
0%
50%
50%
50%
50%
100%
100%
aerobatics :the complexity of the computer light/control model PRO(MAXIMUM)....ABS:OFF....APS:OFF....stabilization system off....auto.the grip on.
Steering wheel: Genius Wheel 3 MT.
Council. On the third level are advised to take the Audi R8 for turns and Porsche 911 GT 2 for fast and accurate drive(Current Porsche when not modernity wild so will it right to the max Tynemouth). And I do not recommend taking the Corvette ( And not moderate it to factory and then the current on the straight to hold him).



AND UP.
But there is something that the car was not so easy to bring down I play on UPR. PRO(on the wheel), and the complexity of computer easy-medium. But I was very much annoyed when someone to cars to dotronutsya immediately into a skid (this is in the beam case) or just my machine permananet and I can not go. Any ideas what to do what would car Chi ailee to do or that the computer is less than cut?

control of the game is complete crap!!!What on the steering wheel(Logitech Momo) that in the clave,only adjusted the sensitivity and everything else..compared to Colin MCRay Rally,Shift bullshit,only that the graphics are killer and the car looks can make according to your taste..

...the synchronization of virtual and real, as such, no rudders at all.

At first did not notice a booster in the settings, set the new configuration, he set up, other settings not touched, and I have everything perfectly synchronized.

What are you bathing??? Everything is simple! All parameters set to 0% - 5%, and Sensitivity of steering at speed of about 15%. Himself those settings also, they are the most comfortable for all control surfaces!
PS: I Have a Genius steering wheel TwinWheel 900 FF, with the angle of rotation of 90 degrees in each direction (although this is irrelevant).

And what about sync virtual and real wheel: this is the most moronic in the management of this game, and no way to fix it, so I will have to get used to. I'm used to it =)

People! I have a problem! I have I Genius speed wheel RV FF wheeel... and when you play the wheel higashida it to the left then to the right, as if the coating (in the territory outside of the track). however, when playing in Дерт2 all absolutely fine, all functions used in full measure! is it possible the wheel somehow, or configure the game to not ... figachit...

Down in the control settings power returns to a comfortable value (I have 3) and if does not help, then just turn the vibration... Rather not remember.

jedi bear, go to control Panel => Printers and other hardware => Game controllers. There in the list is the steering wheel, click Properties and in the third tab all parameters set to 10% - 25%