3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
G
Gray_Wolf 95 17.10.19 06:50 pm

PC - lock at 30Fps. How to remove? (Fallout 4)

I think everyone already knows what's in the game, and the PC version should Lok at 30fps. Who took - write method))
77 Comments
Sort by:
G
Gray_Wolf 95 17.10.19

Paul Carey
When Loka the game slows down, and ate clean Lok, flying. I like your config ultra stuffed after a minimum of 50fps max indefinitely

D
Dontmeo 17.10.19

Paul Carey
No, this is not observed, I have not played on the 30th) once gave me control and I realized that above 30 doesn't Shine, I just got to find how to remove the lock. Although eating a noticeable jerking of the mouse was like.

b
bniiih9i 17.10.19

FPS sags from 30 to 15 sometimes, KEK

i
id.Archer 17.10.19

Parkur_KP3
removed it removed but now how to put vsync at 60 that the picture is not torn

G
GG4 17.10.19

Vertical sync actually does not affect the lock, are completely different things. Vertikalka need to fps was not higher than the frequency of the monitor. Ignorant.

A
Artorius1 17.10.19

If you rule iPresentInterval=1 to 0, the fps rises from 60 to 120 but to pick locks is not realistic, everything is too fast and break the studs instantly.

V
Voodi 17.10.19

at first it was 30 fps and it's a Scarecrow made the game in a window instead of full screen 60, then I looked the comments and altered the file, now the menu is 1650 fps and the game is 80-120 on ultra

Z
Zloy_ParKur 17.10.19

Can the lock be removed, and using driver Vsync enable.

L
Leonn_24 17.10.19

iFPSClamp=60 ))

C
CRASHBULLET 17.10.19

#Casinoextreme

P
Pavel Car 17.10.19

In General, explain how I have solved the problem. Locke was 50 fps by sagopilone found out that the problem may be with the monitor itself. And so it was, checked the monitor, was running in 50HZ. And the game does not change this value. Exhibit 60 was even easier, just go to the nvidia control panel - change resolution - refresh rate change to 60Hz.Also forgot to mention that the run game should be in the window, thanks to the comment below (In the launcher put 2 ticks), Now in Fallout stable 60 frames without any podergivani. (The machinations of the file I did not do, left everything on standard) Went to master Heath, Lord! Good luck to everyone :)

S
Serg2_ 17.10.19

Gray_Wolf 95
You what? I have 60 on PC, on high

S
Spartacus1971 17.10.19

Started a game,immediately became 60 fps.

D
Dontmeo 17.10.19

In General, for those who have fps jumps up to 2000+ the game should be run in a window, then Lok for 60 runs. well and return the parameters iPresentInterval=1. I have so earned.

S
StilCat 17.10.19

All figured out. This method is really working. Go to settings of the launcher and select windowed mode without frame, adjust the resolution and everything. Stable 60 with sync. Other methods obsolete.

G
Garry3Fingers 17.10.19

But as rather to take a Lok at 30 fps?

s
severagent007 17.10.19

Paul Carey file - borderless=1 fullscreen=0 friezes treats. Even when sideways friezes try to disable the wind filter taps Claudia, in dead island so clean wild lags and freezes)

s
severagent007 17.10.19

Garry3Fingersв panel NVIDIA find or add a game, put adaptive sync. with half the refresh rate. If the frequency is Monica 60, will be 30 in C, 75-37 in S.

S
Spyroke 17.10.19

Is it possible to put a ceiling of fps when you disable vertical sync (e.g. 100), so fps didn't fly into space when break-ins, etc.?

s
saa0891 17.10.19

Spyroke

MSI Afterburner