How to fix the texture? (Horizon: Zero Dawn)
Good evening, how to fix the textures?P911 wrote:
2k normally going picture beautiful was
This game and more than that should go beautifully. Something in your settings is wrong...
IgorIvanovich
When I change the permission of such bullshit! If I put 3200 and above then everything is as in the picture! And if below 2500 (I do not remember the exact) then everything is fine but in soap! And the settings are all on the maximum in 2500 resolution but the picture is soapy! I don't know what to do.
P911
disk doesn't have time to load textures
and the swap file that as if compensates for the operative is taken again from the disk, throw the game and phallus to the SSD and the problem will go away
P911
And on the SSD mother's 6-gigat difference stick or 3? The drive is not clogged?
IgorIvanovich wrote:
Cool graphics! Did you run it on the Nokia N73?
I had this thing yesterday, too. In the mission where the boy-king take out of the fortress, it is necessary to meet with the Three-, when meeting him started a cut-scene and graphon just so good. But it was once almost for the whole game. It's apparently not iron-dependent, with the game something.
P911
I have not a new comp, 50 level in the game has not been such a bug
when there is such a problem it is not "everything is normal" and when the question about temperatures give such an answer, it is clear that you temperature is not even measured, and with overheating and trotling disk, the speed drops and may not be enough speed for loading
SPR1GGAN
The perg crystal disc temperature is exactly which in m2 35 degrees of other screws on 31-32, on the system block also has a temperature of 25, I have a problem in resolution, if I put 3200 then the picture as a screen, and if less all in the soap to play is not very nice, with RDR2 such was not a picture beautiful! (if you want I can screen DDR2 settings to do)
And I've got Wind 10 on the SSD too, a version of the 1903 wind can be a problem here?
P911
yes hardly because of the wind, the windies had trawls only with the launch
if at high resolution where textures are more give out such plasticine, and at a lower everything is normal, then really does not take out the overload, if with the SDS all the norms then xs can be a problem, only if the memory, but I have DDR3 in the frequency of 1800 all normal, you probably have DDR4 there and even more speeds above.
Ndre2 with horishand to compare the same is not worth, different engines and most importantly optimization, which in the chorus can be said that no
Look at the temperatraru at the very moment when the picture is so tossed, but what already and in this little faith, the operator did not drive, may timing what curves
SPR1GGAN wrote:
DDR4
yes ddr4, 2 bar on 8. at the moment of play 38 degrees. I think we should wait for the patches.
P911
yesterday played with the browser on the background worked YouTube, short operatives were scored well and for a couple of seconds in the rollers slipped similar unloaded
Try to download the memreduct that cleans the operative and before the game reset
SPR1GGAN wrote:
memreduct
The program was 28% after the cleanup became 12%, when the game launched 68% this is when the first time launched, that's when the second and at the resolution of 3200 is also all chumps.
P911
it's weird that you have such a consumption of virtual memory
here are my indicators without cleaning, just launched after a couple of hours of play
SPR1GGAN
And what are they doing with it? And what is available 2 out of 25 not a little? Can I increase it?