Optimization (Elden Ring)
As a matter of fact, yesterday there was an event of Elden Ring in collaboration with the power engineer Red Bull, this event played a large number of streamers, including a streamer (moderator, who did modding tools for each of the parts of the ds). Many of the streamers played the PC version of the game and as it turned out the game suffers from constant microfreezes (at the moment it is not known what caused this - whether it is a problem with the compilation of shaders on the Dx12 version of the game, which is quite easy to fix, or because of the new anti-cheat system that was introduced into the game). Plus a few reddit splitters write that two days before the release, will be added (as is the case with daing light 2, but that's not yet accurate). Plus there is no support for DLSS and AMD FSR, there is no support for ultra-wide monitors (most likely because of the new anti-cheat there will not even be a mod that will fix this problem, because modding for Elden Ring is hell - at least so says Lance McDonald = one of the main moderators of all souls communities, who also confirmed the problem of microfreezes on his yesterday's stream). Plus maybe the game has a memory leak, because several streamers, including Asmongold, have the game hardcracked the computer several times.mywest
After today's update, everything ran much faster, the friezes almost disappeared
abbadon_na
Well, the friezes didn't really torment me, but when the FPS sags to 30 for a second and then immediately back, it's certainly HELL.
It spoils the fact that the game is gilded at 60 fps. Everything else plays smoothly. There are no claims.
I also noticed that even when 60 fps is stable without drawdowns and friezes, there is still no feeling of smoothness of the picture, as in the same souls at 60 frames.
abbadon_na Frame
delay is higher than higher in open spaces (well, the camera on the mouse was poorly implemented), plus anti-cheat affects FPS and frame delay, I personally checked it on the latest version by downloading a pirate after playing the license
optimization is good, but sometimes there are freezes due to an error: Exception code: 0xc0000005 Error
offset: 0x0000000001db708d
Failed process ID: 0x33b0
license, no overclocking, I think anti-cheat! sometimes there are small FPS drawdowns, but this is not critical, the game also keeps the video card in tension constantly at 1.070+ millivolts, but does not load almost because of this, the squeak (throttle) of the card is slightly audible (not in headphones)!
abbadon_na
I also have a GTX 1080. But in the open world 40 fps and less on Medium. I do not understand
I have that with the 1st, that with the 2nd patch, there are no changes. Processor 4770K, video card RTX 2060 6 GB, RAM 16 GB. Settings max 1080p. The workload of the video is 70-75%, the processor is no more than 70%, and the fps stays at 45-48 with periodic drawdowns even standing still up to 38.
If you set the resolution to 2560x1440 (even though I have a monitor and FHD, but nevertheless), then the FPS is basically the same, only, of course, the vidyaha is already more loaded - by 88-90%.
I had similar nonsense in Star Wars Jedi: Fallen Order, where the video was also not fully loaded, and the FPS was about the same level and no patches / firewood / manipulations in the Nvidia panel, etc. so they didn't help.
optimization so-so played 50 hours, crashes just like that, event error in the event menu 00000005 from category 1000 (the card is not overclocked, maybe I don’t like the HMP memory), the saves in the thunder castle cleared the castle and then went to kill the dragon, I come to the game tomorrow, what do I see? the game rolled back the save to clearing the castle! AWESOME! ANGER! killed the boss on the bridge played with the arc, now I can’t summon him to the huge first loca - brilliant!
BlackDraqon
Obviously, it's the processor. I have the same problem. Also i7-4770K. But even the 1060th he cannot load in 99% on an ongoing basis. The game behaves as badly as a stalker that runs on one core. And here, apparently, everything that is less than 6 cores is not able to export the open world. Ridiculous and shameful for 2022 and a game with far from the most advanced graphics.
DarkoLay Proc
for 4 cores or less?
Played 80 hours, went 100% from 45-55 fps. Card 2060, percent 5 2600.
Yesterday I decided to test different options, tried every guide from YouTube, updated Windows, put the game on the ssd, finally nothing helped) Drawdowns when you move the camera, move or look at a lot of objects.
Is it fixed or wait for a patch in six months?
it's strange to read about friezes and fps below 60 for people with good hardware. I have 5 razen 3600, 16 gigs of RAM 2666 MGG and 1660ti card. FullHD, high settings and stable 60 fps. rare microfreezes when moving to locations
Alex Hawk
is possible, but again, not even a single core is loaded higher than 70%, it's clear that the optimization curve for old processors, and in general in general + the same friezes in any place not even loaded with details. Let's hope that the next patch will fix this problem.
dfavour
Well, even on the 6th nuclear protsik, and then it turns out 45-55 fps, how many fps do you have on the initial lock, like on my screen? I also tried different methods, nothing helped either, so it's obvious to wait for a patch