Overclocking fx-8350
Good dayGuys, this is not difficult, write the instruction with values for reasonable and proper overclocking of the CPU, memory controller, and just what you need. Or photos BIOS send.
There are a million videos, but it is either driven to 5 MHz, or describe the process for free understand this.
And to spend a couple of days just to attempt the selection of stable frequency and no others possibilities
CPU fx-8350, mother, Gigabyte GA 970A DS3P and two pieces of 8GB memory frequency 1600
Thank you in advance
william1992
If everything is saved and the system is stable - then Yes, it makes sense to drive the bus there
[Denis]
[Denis] wrote:
There is such a topic,as a secondary timings.Not only the frequency of the RAM to raise,but the secondary timings to understate.Honestly,not studied. But if there is time,look in the Internet.To DDR4 with their help it is possible to equate to 2133 3200Мгц
A very controversial statement. Without such concrete evidence, it is better not to do.
Something is clearly messed up.
OkGo
Look at the video.Not all games,but such equality is the place to be,or the difference is minuscule.Battle,by the way,the more the frequency of love
[Denis]
And I was watching.
Let's start with the fact that video where they play with secondary timings a little.
Some of the most detailed tests were on channel Your computer or i2HARD (don't remember exactly), but the problem is that there is a video on lowering the timings give the increase, but I remembered that :
1). Not everywhere it played a crucial role. But for several projects to score the frequency to lower the timing a strange decision.
2). The good result gave a reasonable increase in frequency with a simultaneous decrease in timings.
While writing a response I decided to find the video, about which wrote above:
Spoiler
OkGo
In this video, lowered the factory timings, both primary and secondary, and it was at stock 3200. Ie, You not only get the coveted 3200, which certainly is a plus, but the gain from moving subliming the order of 15-30% easily. It works and Intel just as well. Factory timings too high. Tomorrow I'm going to torture myself Ryazan 1600S, fingering timings G. Skill 3200 CL14. See the difference in the Origin.
In the video the basic test (above), was 3200 with low timings, and then comes the experiment, lowering the frequency with the same timings, came out interesting.
OkGo
OkGo wrote:
. The good result gave a reasonable increase in frequency with a simultaneous decrease in timings
As anyone lucky.I also grabbed two laths on 8 GB:
But they do not exist in the recommended for my Mat Board.In the end, 2933Мгц work when you enable profile 1
hyper1
In short, a week later trahodrom dispersed I this thing On the bus
NB 2600
HT 2600
Core 4400
Memory 1920
In the test 3дМарк skydiver showed +20 fps max, +15 at medium and +2 at the minimum fps
william1992
It's good, it's in the motherboard probably more she can't )))
And memory Duhring it was necessary to take )))
william1992
congratulations) but the synthetic tests are one thing ,and you do a sweep. now in battle.
what's your memory? write full name
hyper1
The points now there. Is NSF, which suffered the same problem. Now does not fall below 50
william1992
In AC3 was it tested?In new York, I have risen under 80% load.In Battle it is necessary to try
hyper1
If the AC3 shlasko lower,the load on the card immediately crashes.I was 1 point down,and in Froniter FPS immediately jumped,but the load on the map places 89% instead of the regular 99%
[Denis]
no,the Assassin did not get yet. Tested so far only established game. Tomorrow I'm going to reinstall Windows on the SSD and then I will do the rest)
william1992
Friezes are either from nahata RAM,CPU or skinny.When I Kukuruzo 3 Suzaku AMD Phenom ll x4 940BE 3.3 GHz + 570GTX took place,I in places where grass game prisila:
Spoiler
Until I discovered that my RAM works at 400MHz DDRII.Then raised first to 800MHz,then to 880Мгц.And friezes missing
[Denis]
Well, definitely not the case for the graphics card)))
And the RAM would be nice to buy new, but at that price...sit on the old))
william1992
I'm under AM4 bought RAM for 13k.Now she is 16.Any of the recommended 16K for the 16GB.2008m 4 х1Гб strap OCZ 800MHz 5-5-5-15 I 5200р(ochepyatalsya,wrote the first 5600.I 5600 for HD4850 given)) paid.Actually, I played to Kukurusina 3:
on 400Мгцах)
AM4 default puts 2133Мгц
william1992
On DDRII timings below
hyper1
hyper1 has written:
that's the same thing I have , absolutely top sags to 30, in BF 4 are all excellent, not work, so percent 100% bowel and does not drag бф1
When talking about such moments:
It is not in the CPU business.In BF1 videos in 30 fps:
And FPS while in the single playable:
BF1 on the map 2012
