william1992 11.01.20 11:28 pm

Overclocking fx-8350

Good day
Guys, this is not difficult, write the instruction with values for reasonable and proper overclocking of the CPU, memory controller, and just what you need. Or photos BIOS send.
There are a million videos, but it is either driven to 5 MHz, or describe the process for free understand this.
And to spend a couple of days just to attempt the selection of stable frequency and no others possibilities
CPU fx-8350, mother, Gigabyte GA 970A DS3P and two pieces of 8GB memory frequency 1600
Thank you in advance

227 Comments

RadM0nd 11.01.20

hyper1
Damn, I was even wondering. Will have his system in such areas with acceleration and without drive. Hey, what program are you all measured? And then when I dabbled in overclocking, only in the course prog from MSI was

hyper1 11.01.20

RadM0nd
msi + aida64, but there in the settings of Aida need to sync ti 2 things that all parameters were derived

hyper1 11.01.20

Yes emae connection to the yubisoft servers tupit

hyper1 11.01.20

william1992
here on 1600 no difference

RadM0nd 11.01.20

william1992
With SSD you have helped, I would have said nothing new. Put on it by the OS if space is still a lot that can still throw applications. Well, gigs 5 - 10 as a reserve leave. The rest of Winchester

hyper1 11.01.20

to move you need, then disperse percents of NT and NB will make a video blog

william1992 11.01.20

hyper1
Yes emae. How so!!!

RadM0nd 11.01.20

hyper1
You focus in none. Shadows and resolution drop

hyper1 11.01.20

RadM0nd
and smoothing still, but who plays with an emphasis in percent)

william1992 11.01.20

hyper1
campaign I'm playing now))

hyper1 11.01.20

RadM0nd
here at 1600x900, low shadows, low anti-aliasing 1600 operative

RadM0nd 11.01.20

hyper1
Well we're percent of testim isn't it?)

hyper1 11.01.20

1600x900, low shadows, low anti-aliasing 1333 operative

hyper1 11.01.20

RadM0nd
well, you know the difference is not big, 7 fps, but бф1 it does not drag even when overclocking to 4.5 percent, NB and 2600 HT 2600

hyper1 11.01.20

william1992
you buy the operative assistants out my measurements showed that the difference is not big, maybe a powerful operative will give the increase

william1992 11.01.20

hyper1
Will. Let's see what I can squeeze out of this pumpkin

hyper1 11.01.20

I followed the advice of Maxim from there the motherfucker is a bad choice and took in his instructions to the operatives at 1333, though I could take with a frequency of 2000, but the chipushilo said they say take the cheapest, the difference will not be(

hyper1 11.01.20

william1992
and when you're still going to do that?

william1992 11.01.20

hyper1
Yeah, it is impossible now to listen to anyone

william1992 11.01.20

hyper1
I think on the weekends