Overclocking fx-8350
Good dayGuys, this is not difficult, write the instruction with values for reasonable and proper overclocking of the CPU, memory controller, and just what you need. Or photos BIOS send.
There are a million videos, but it is either driven to 5 MHz, or describe the process for free understand this.
And to spend a couple of days just to attempt the selection of stable frequency and no others possibilities
CPU fx-8350, mother, Gigabyte GA 970A DS3P and two pieces of 8GB memory frequency 1600
Thank you in advance
william1992
Yes ass with operatives, even Alyx is not present on the normal price. but I plan to buy still 2 dies on 2400 4GB, I have enough 8GB memory, but I'll do it a month and a half
[Denis]
although judging by the figures to the chela the none overclocked memory up to 1562, to the core is 4196, and I have a drain 1329-3500
[Denis]
Yes, percent not export, vidyaha loaded at 70%, make a tape with the same settings Grifoni as chela, vidyahu dispersed to 1493-4000, and acceleration some gave nothing of course, because the percent nedogruza it
william1992
well, maybe things will change with better memory
how's the acceleration?)
hyper1
Duc to 20 00
But already reviewed a ton of video. Had filled two sheets with sketches
hyper1
You got below 60FPS and simple card by 30%.Tin.It is difficult to imagine how to stand will be 1060-nd
william1992
There is such a topic,as a secondary timings.Not only the frequency of the RAM to raise,but the secondary timings to understate.Honestly,not studied. But if there is time,look in the Internet.To DDR4 with their help it is possible to equate to 2133 3200Мгц
[Denis] wrote:
To DDR4 with their help it is possible to equate to 2133 3200Мгц
Absolute nonsense. At least sounds like it
hyper1
william1992
Anyways, it turned out only Kolda BO2 to get rid of it. In the rest of the Lok games or FPS or focus in vidyahu on all settings. Left memory clock 2000, 1333 on the right. Still mostly in vidyahu rests.
RadM0nd
powerful
And I have some trash: all night picking up the timings and voltage. And finally victory. Voila. All tests pass and everything works...
But ska, the game starts now just crashes without any errors
RadM0nd
in short, the RAM I have categorically not being followed. What I did is sooooo underestimated timings, increased the core multiplier to 22, set nb and ht at 2600 and threw voltage by 0.100 V to the core and Severny. Now heated to 57°; but long working time is no more.
The maximum fps can not see the difference. Since I play with V-sync at 60fps, but the drawdowns become less noticeable
On the weekend I will have details to check.
But that makes me very happy - Forza Horizon 4 even without overclocking goes on ultra settings at a perfect 60fps (loc) and two hours of games fps did not drop to any one
RadM0nd
RadM0nd wrote:
In the rest of the Lok games or FPS or focus in vidyahu on all settings.
In AC3 zero put on vsync,and loc will be removed
william1992
The timings on the Figs a little that solve. On the contrary, try them on a couple of points to increase (relative to flow) and raise the frequency at least up to 1866. If it does not - rotate naprugu on memory. Prior to 1.7 you can increase without any problems. If you already did that and still didn't help... then the XS to be honest
FX is eternal, but requires direct hands and the normal Mat boards (not budget) for overclocking. Necessary to drive the bus, because it is a bottleneck. Ie just raising the multiplier like on the Intel, you do very little to increase performance.
RadM0nd
I watched a video on YouTube of Stalkish. There he says that it is necessary to drive the bus, as the multiplier is not saved overclocked settings memory type and the bridge.
But the question is - I have saved and everywhere displayed the correct frequency.
Means to drive the bus makes no sense?
Or all identical parameters of the acceleration of the bus is still preferable?