Upgrade PC
Hello. Once the forum has helped me do a small upgrade, now again want to do a budget upgrade, need your help)Now my system:
Athlon x4 640, Radeon hd 7770 1gb, 8gb ram, and PSU like 450 or 500 ( what is nonam, but so far all pulls), motherboard asrock n68c-s ucc.
What I want: a computer for programming and games. What would Pugb in full HD, at least for medium-well pulled , with fps standards. Well, other games tipo 1 Battles, and more.
Since upgrade want budget, then consider BU components.
And most likely I will upgrade gradually.
I looked percent of the amd fx 8300. Accordingly, it requires a mother. I don't know what a good, and budget. Just need a normal hard disk on 500 GB, not BU. That's what I'm going to change first. And then a replacement video card, I think that will have to pay for 1050 ti. If you know a cheap version of the older cards - write plz. And so , if the whole system my PSU will not pull - you'll have to replace him )
In BP I in General understand nothing, and don't know what is needed .
And also, first and foremost, I would like some pretty cheap housing.
In General, please suggest which components can take, what percent, etc. Ready and to disperse something , if it's not too hard, and the cooler can cool. Thank you.
OkGo
From Panasonic. Also on the same turntable.
It is better to take 1050ti normal?
Zefir4ik_kefir4ik
It is better to take 1060-ku on 6GB. The overpayment is not the biggest will.
Or better to see out already until the next gen cards (at least before the announcement).
Zefir4ik_kefir4ik wrote:
And that someone thinks about vidyuhi... with a cooler ?
If space in the hull a little, or the location of items in it is not entirely successful (long graphics card can rest against the disc tray, or in the end discs themselves or their leads), we can take this baby. But if you're going to overclock the video card, better make sure you have something serious with 2-3 bedrooms with fans. The 960-I am a little - until the maximum was heated to 68, the acceleration is not engaged (there is a small factory).
Spoiler
SonyK.
Thanks for the help.
Please help with motherboard )
There are two charges. First: Gigabyte DS3H B360M
and second Z370M Gigabyte DS3H
What to choose for growth? I understand that z chipset will allow me in future to put k % and to disperse it. But it is a budget Board. Perhaps badly and not overclocking it?
The price difference is not significant. Except that Z to wait longer.
so I think that to take? I have to say that the acceleration is not very fond of and would like to do, but if given the opportunity - the course will do)
And the most important. If I were to take charge on the chipset, and the memory 2400. Will I be able to overclock it to a maximum of 2666? And if you take the Z chipset if I can overclock it higher? And does it make sense for Intel processors?
Zefir4ik_kefir4ik
Personally, I both do not like - more like motherboard form factor ATX. But if I had to choose only of these, would take 360-Yu - she has 2 connectors to connect case fans. Overclocking is not do not consider.
SonyK.
Well, I 2 connector is not enough ))) I Have at least 3 fans, if not 4. But the buildings have a built-in fan controller, and I understand that plugs into the motherboard is not so important, right?
Zefir4ik_kefir4ik
I have the motherboard connected to Cabinet 1 (the 2nd I had to plug in the MOLEX), very uncomfortable: no self-alignment using the PWM and monitor the speed. Built-in fan control can adjust the speed ?
SonyK.
well, the built-in fan control, it's a button. one mode is a maximum speed, and the second mode is slow cooler)
case gamemax g536-w
Zefir4ik_kefir4ik
This fan controller does not automatically (depending on a certain temperature) change (without action by the user) the fan speed. And the motherboard 4-pin connectors (if connected fans PWM) regulates the speed of the cooler itself: more temperature - the higher the speed and Vice versa. Heard that some motherboards can regulate 3-pin, but I with such did not face - I can not say exactly.
SonyK.
Yes, I machine and is not necessary. I'd rather see what I could adjust.
I was told that my case comes with 5 coolers inside. And what to do with them?))) all connected via the built-in fan controller? or something in the fan controller , something in the mother? or that all from BP? Will there be enough connectors ? or 5 coolers in the case, what is not necessary?)))
By the way BP. Ordered a Aerocool 600w ksas. A lot of reviews, mostly positive. Of course there are bad reviews.... 80+ bronze, well, like all the rules.
Zefir4ik_kefir4ik wrote:
...or 5 coolers in the case, what is not necessary ?...
Good cooling won't hurt, especially when overclocking. But if the motherboard and the fan controller is not enough sockets, part of the coolers can be connected via a power splitter...
Spoiler
...or via the adaptor to the PSU.
Ordered a Aerocool 600w ksas. A lot of reviews, mostly positive. And of course there is bad reviews...
Someone got married, or did not calculate the power and burned the PSU load - anything can happen...
SonyK.
OK, and there is an option to buy a fan controller separately, right? But not always bring it? or maybe even fail?
Yes , a faulty PSU to someone across , I hope the rules will be. But marriage is not so bad , just time lost. All afraid that BP should seriously to choose, but my Chinese nonam on 460w, I even Google can't find , quietly worked 6 years and still works, and even a map with additional power pull.
I hope aerocool will not fail.
Zefir4ik_kefir4ik wrote:
...marriage is not so scary...
Depends on what kind of marriage is one thing if he will not work another if something in the system unit will burn.