Graphics card with factory overclocked (Fallout 4)

BlackTigerTK
Yes, just had a problem and was the easiest way to solve it is to reduce the frequency. And the problem may be a total system instability.
I do not understand about what speak, on any issue.

BlackTigerTK
And once again I draw attention to the possibility of changing the standard curve fan control to custom. I have this has led to a decrease in temperature
I don't care, I have manual control, it is more reliable.

vftor
Because some curves game engines just can't handle overclocking(3,4 fallout, WoT,AW,wolfenstein the new order).Even if you are on 10 MHz will raise the core frequency, then they immediately crachat driver or DirectX issue an error. And these engines do not care what video card is stable at much higher frequencies without the artifacts and glitches

Lisstoman
And some gamers writing that developed putting it in the engines of commercial considerations. Can this be ?

vftor
XS)

Lisstoman
And look here. If the game that krašit driver, one works fine when you reset the overclocking, and I'm forcibly limiting the framerate (fps) to 45 Hz (prog Bandicam) without resetting the overclock, and I also working fine. Then it turns out that if the game is identifying the video card as the overclocking, and I have crashit driver, but it's not worse. The question arises - how the game determines that a video card with overclocking ?

vftor
I'm talking about overclocking beyond the factory. And if you have games krasitsja when factory overclocked, it is likely that problems with the none.

Lisstoman
I have a factory overclocking. And what could be the problem, dispersal of it in Africa and acceleration.

vftor
In the factory overclocking should all work consistently and without crashes. So I flew 780 from Gigabyte, and soon chip off. Was replaced under warranty.

Lisstoman
Actually my video card has feature: basic 780Ti - core frequency=875 MHz, my (from the plant. acceleration) - feature (writing)=1006 MHz, and I'm reading max=1160 MHz. It turns sverrisson. Maybe that's why. But then how to explain that in this sverrisson and limiting FPS=45 Hz, the driver does not crash.

vftor
The fact that at 45 fps the graphics card is not loaded to the maximum. Download stress tests and see if crashes. Furmark, unigine naiven 4, valley.

Lisstoman
Stress-test I could in Fallout 4, increasing the limit of FPS to 60. I did and then the temperature rises to a critical=82, and continues to grow. Then I turned off. I understand that the driver crash when exceeding the critical temperature, and not on what graphics card acceleration.

vftor
Not. Download it stress testing. And look at the behavior of the graphics card. You have a company card and what klad?

Lisstoman
Palit GF-GTX780Ti - plant.overclocking the GPU to 1006 MHz (bus 384 bit, memory 3,072 GB). Max. temperature= 82 ° C
Also put a pretty powerful fan, further cooling the graphics card.
And why the stress tests and not on the game in serious mode ?

vftor
In the tests the load more.

Lisstoman
So the load can be any set. In the game I have turned off the vertical.sync and set FPS on Bandicam. I did that to speed up the download locations.

vftor wrote:
Not anywhere yet. There is only beta of 8 and 9 March. We have to wait. I say that with this case it is not necessary to hurry.
I have already explained how to check. Just downloaded from the website of nvida for 7s ( I have the 10-ka ) - a digital signature from the 10th of March. Although the site says that the release from the 8th of March. Mention of the beta on the website nvida have these drivers, no.

vftor wrote:
I do not understand about what speak, on any issue.
About the fact that someone is having problems that are blamed on the crackdown. Although the cause may be, for example, in a powerful enough PSU.

vftor wrote:
I don't care, I have manual control, it is more reliable.
I meant the fan control on the graphics card. The point where to have manual control?

vftor wrote:
But then how to explain that in this sverrisson and limiting FPS=45 Hz, the driver does not crash.
How to write Lisstoman load on the graphics card in this case, less.

vftor wrote:
My (from the plant. acceleration) - feature (writing)=1006 MHz, and I'm reading max=1160 MHz.
That's the cause of the crash. Overclocking. The chip is under load it can not have to work steadily, which causes a crash of the driver. Ate want to use on this frequency, it is necessary to raise the voltage on the chip. I advise you to read the related card with the description of methods of dispersal.