Graphics card with factory overclocked (Fallout 4)

vftor
what is critical? and what's the card worth?

unbearable
Here's all the data:
Motherboard ASUS P8Z68-V PRO-GEN3
Intel Core i7-2600K (3.5 GHz)
Palit GF-GTX780Ti - plant.overclocking the GPU to 1006 MHz (bus 384 bit, memory 3,072 GB). Max. temperature= 82 ° C
Monitors 1920x1080 (60 Hz), DVI-D + 1280x1024 (75 Hz)
RAM 16 GB
Disk - SSD
System - Windows 7 x64

vftor
the temperature during the game? I have a 750 ti. and goes up to 80-81 and this is a normal operating temperature.

unbearable
Fallout 4 (with mods) when FPS=60 (limit prog Bandicam) 5-10 min. comes to 82 ° C.
- if FPS=30 (restrict prog Bandicam) for a long time does not exceed 70 ° C.
in the beginning of the game Fallout 4 (no mods) with FPS=60 for a long time did not exceed 70 ° C.
But in the Witcher 3 when FPS=60 in 5-10 min. it got up to 82 ° C. Put FPS=30 (in game settings), and for a long time did not exceed 70 ° C.

unbearable
I do not know how the 750 Ti, but the 780Ti at 82-83 ° C flies video driver.
Now I looked in the Internet for 750Ti - max. temp.= 95.
Also on another site - for 780Ti - max. temp.= 95, but the performance at 780Ti (my) - max. temp.= 82.

vftor
try with full high resolution just high jump. that is to say from 1920x1080 to 1680x1050. and have a look.
I do not get it
the idea for a 7 series is already the program is responsible for temperature. that is to say until the temperature is normal, the frequency of a machine rises as soon as the temperature reaches the ceiling, the frequency of the video card crashes and fps sags, but the temperature is reduced. something like this.

unbearable
Oh, it's nothing. This is the path of deterioration of graphics quality. And I, without compromising quality, limit FPS. It better.
There is another matter. Some discrepancies with temperature: 82 toli toli 95. But when the driver flies 82. Might replace him ?
Now I have v.347.88 (from 16.05.15 g). V downloaded.364.51 (from 09.03.16 g). What do you think about this ?

unbearable
No!For the 750 Ti 60-65 norm.

EvgenyDMT
go to the NVIDIA website and look at the graph of temperatures. there are black and white 80 degrees is the norm.
vftor
em. who told you that the graphics will be worse? there will be of course a little worse. but if you do not know where to look and especially to pay attention to it it will not notice the difference.

unbearable
I do not care to what your valaska heated.Once on the website it says 80g,gray it up to 80 )))))

unbearable
Nefiga does not notice at 1680x1050 !
Now made a compromise: removed 1 extra mod and was 2 deg. less then increased the FPS to 45. As a result, the temperature not more than 75, and the picture in the movement is smooth.
Conclude that in Fallout 4 will ship with the game unoptimized fashion. And the Witcher 3 - the nature of the unoptimized (about it already wrote).

EvgenyDMT
naturally still. who in their right mind would argue with the developers of these cards? a normal person would not.
vftor
I don't know how to notice. already 100500 times the experiment was carried out. of the 100 subjects randomly taken from people in different cities. only 30 guessed. and just likely guessed. because the attempt to explain why there is better and there is worse. it's funny to watch ))

If the factory overclocking,and the cooling should be optimized for these loads.
As they write on the forums what may occur if you mismatch the voltage and temperature.(But do not know personally)
It is advisable to clean the ENTIRE system unit(hull coolers and hole and not only viduh,that would be the best air cooling of graphics card), both suggest that demand should be more cooler than blowing to increase the outflow of the already heated air.
If cleaning does not work,you can remove the cooling and to check the thermal grease on the core,IF the WARRANTY is OVER ONLY!!(There was a case a friend bought a GTX 460 through 3-4 months burned,took warranty,it turned out that thermal paste was a match head(as told in service))
The manufacturer reports the maximum CORE temperature(GPU)! But not the memory chip and capacitors!
The core can heat up to 70-80 degrees(but it's ASS) on my 8800gt under load and the GPU temperature of 60-70 degrees, blown capacitors) And it worked))) But the maximum resolution was 640x480 and the color depth 8 bit))

vftor
in the configuration file (Fallout4Prefs) in the section [General] handles set iNumHWThreads= corresponding to a physical number of cores on your processor.
try this.
I put. I have 6 cores. plow all the rules. 1680x1050 60 fps easy. vidyuhi 75 on average.
at 1920x1080 40-45 . fps. of course not on ultra. all on a high. antialasing 16. off the effects of hits of bullets, for no difference what a guzzle up to 5 fps.
glare also removed, looks still is not very but also eats a few fps. left rain, humidity.
the light high.

usa55059
Cooled graphics card I have is fine - worth the extra fan blowing to the graphics card.
Temperature before the start of acceleration (core frequency GPU=875 MHz in low graphics load) normal=50-60 Gy. (from off. complement.fan). It says normal cooling, that is, about contact through toothpaste.
Temperature taking advantage of acceleration (the GPU core frequency=1160 MHz when under heavy graphics load) increased=70-75-80 C. (with sluchainym more.fan). This shows the limit of the graphics load in the game, and not to exceed this limit, you either have to reduce the graphics quality in the game settings, or force it to limit the frame rate of video (fps), which I do, that is, without reducing the quality of the graphics, limit FPS up to 45 Hz. the program Bandicam.
unbearable
About iNumHWThreads= is already known and does nothing, since the game by default uses all CPU cores. This can be seen in task Manager.

vftor
Regarding drivers - I recommend before installing to verify the digital certificate. NVIDIA has released the first beta 364.51 to close a critical bug in 364.47 - there is a digital certificate from the 8th of March. Then came the release, BUT! with the same number 364.51. Is there a digital certificate from the 10th of March.
Yesterday conducted an experiment in MSI Afterburner chose a custom schedule fan control. Until then had been sewn into the BIOS of the card. Before under heavy load and acceleration the temperature jumped to 88 degrees. After applying the custom graphics in the same place at the same acceleration temperature does not exceed 81 degrees.
PS: videocrat Titan first.

the first time I heard. and factory overclocking gives the advantage to 0%. it's marketing.
not recommended to play if recooper with the acceleration so that the monitor then artifacts covered.

vftor
I have not used all the cores. only two. missed maybe you rolled back the driver?

BlackTigerTK
I downloaded 2 driver v.361.51 of 8 March 16, and March 9, 16, March, 10, not seen. The campaign that I downloaded the hack. Could also be that some new games will run better, and the older will start to mess up. Don't touch anything.
And about the fan, I bought a fairly powerful and quiet, and hand the controller to him. When necessary, include the full.

unbearable
Weird ! Maybe you have some other distribution, or something in the configs.
And the driver I rolled back, and why, if everything is working.