60 phps for GTX 1060 without loss of quality (Cyberpunk 2077)
(all screenshots look in full resolution, opening the entire screen clicking on the screenshot of the pcm - open in a separate tab and clicking on the magnifying glass lkm)In general, a moment of witchcraft. First, try to guess which of the screenshots below is a net 1080p, and on which 1080p is 75% scale with twisted sharpness.
Spoiler
Spoiler
And here are the answers...
Spoiler
Spoiler
On these screens, default sharpness values from the nvidia panel. Namely 0.50 / 0.17. The screenshot is below 1.00 / 0.30. I prefer to stop at such values.
Spoiler
If you're going to turn on the sharpness right here.
Spoiler
artenoz
All updated
Percentage fx 8350
Standing on the the sd system
In the game settings chose a slow hard drive, no
ivan543
Strangely, I almost always have 98 percent load on a graphics card... Do you have something with her?
ivan543
Well, if the percent is full, then it does not allow the graphics card to fully open.
Guys, how do you turn on the fps? I have a lateral after-bar, but I don't want to show it in a cyberpack.
I have i78750 gtx1060 6gb, 16 ooz. I play somewhere in 30 fps on the middle settings, goes smoothly and BAC, fps falls then 5-6 frames for a couple of seconds and then back to 30. Do you have such sifting friezes, too?
ivan543
I, by the way, also shows only 30% of the load on the graphics card. 1650 super
ivan543
Bet on SSD (try at least), with hdd game friends does not want, SSD saves and solves problems with textures and hangers in animation.
ivan543
It's just that the percentage is too out of date, so it's not taken out of the vide, from here and the load of the 100%, and the vidich is only 30%.
iDaemon
Unfortunately, only the text of priority dialogues is increasing. Random replicas of random characters do not increase.
ivan543
These are the settings. The textures are high, the review has not changed (on the video 100, and I have default values)
Spoiler
Alex Hawk
Tried your method. Well, not bad, but preferred to put dynamic FidelityFX CAS with a minimum resolution value of 85. Well, part of the shadows is medium. As a result, 50-60 phps received
No more drugs
Well, you can experiment there. At first I even thought that the screen of the permission to capture by some miracle, but having checked through all the same with 50% of the resolution made sure that all the norms. Fifty per cent of the ass, of course. There's nothing to save.
It really works. was 22-25, it was 48-55 in a certain spot. The rest is 60 instead of 35-55.
Thank you so much for the great guide.
Alien003
Also. I have a 5600xt. In the driver sharpness of 100, and in the racks of graphics dynamic FidelityFX CAS activate and play with the resolution to the desired cut