Rx 6600 xt video card frequency drops
Please help me bought a new video card rx 6600xt at 8gb, the problem is that in games the frequency of the video card drops from 2400 MHz to 700 MHz (the problem is in gta 5, since the frequency of the video card drops to 0 MHz there and friezes occur, I turn on vertical synchronization, there are no friezes, but, accordingly, no more than 60 frames, I insert an old gtx 960 4gb card, everything is fine, there are no friezes, the frequency is stable more than 1000 MHz) In other games, the frequency is also not constant, it can keep more than 2000 MHz, and then drop to 1000 MHz, but there seems to be no friezes. jump? I just asked people who have the same card and their frequency seems to be more or less stable and is it possible to fix this frequency somehow? , I'm afraid that something is wrong with the card (. If something does not heat up the card (somewhere around 61 degrees), I reinstalled the drivers, reinstalled windows, carried out tests in fur mark for about 10 minutes, where the frequency is stable more than 2000 MHz and the temperature is 61 degrees. Please help me, I don’t understand what the problem is. (The whole system is ryzen 5 3600, motherboard asus prime b 450 ma 2, 16 gb RAM, power supply 750w)Eloi
When you choose 3200MHz in the BIOS, do you press F10 to save?
It is possible that when you reboot, your mother stupidly resets the frequency back to 2133 MHz. This may indicate that something does not suit her. For example, voltage. Do you change it when you choose 3200 MHz RAM
? like this 
If you have a flash drive, plug it into the computer and try to press F12 in the BIOS, it is possible to take screenshots on the flash drive.
Denis Kyokushin wrote:
You need at least 1.39v Too much
for 3200.
Dram calculator for Ryzen recommends 1.35v for 3200 memory
.
I have a samsung b-die on 3400 working with 1.38v and then this is an increased voltage on them due to the tight timings.
In my opinion, there is no memory that needs 1.39v for 3200, except for some extremely unfortunate samsung d / e-die
In general, yes, the settings of the set frequency were not saved and now the RAM is higher than 2800, the computer does not turn on
