Optimization (Stray)

TopPCGamer
Do not flatter yourself with Asus:
Asus Dual RX588 Its
frequency may also drop

MOSHIVURIA lapwing
In the 3000th line of RTX, the memory is in principle hot, most likely saving on thermal
pads
.
We look at the temperature)
What is the temperature here? Temperature is just one of the indicators, in general, the quality of a gigabyte sucks and there are just a sea of ​​them on services

Denis Kyokushin wrote:
Do not flatter yourself with Asus:
His frequency may also drop
Asus asus strife and any vendor has models that are completely bottom and there is a top, asus dual is far from top, this is a very budget level, like in principle the RX 580, cards of this kind do not bother much "tuning". Any acceleration does not give much, and this is more for the sake of beautiful numbers. For example, 3090FE and 3090 MSI Suprim there will be a difference of 5-7 frames in very demanding games, maybe 8-10 frames in less demanding ones (where fps > 120+) and maybe even 15-20 in games where fps is at the simplest 150+. For the sake of 5-7 frames, it makes no sense to drive the card, but top-end chips make some vendors very tuned from the factory in terms of power scheme, maximum power consumption, cooling system, etc. So the difference in MHz between a simple 3090 and a tuned one can be about 300 MHz. And the RX 580 doesn’t chase like that, well, you throw 30-40 MHz on top and you won’t even feel it, therefore, you will not find especially cool versions of cards of this kind. In general, I’m talking about the quality of Asus, of course, everyone has factory defects, but Asus is better in quality and the components used

TopPCGamer
I sent you a full review of the 3090ti Gigabyte OC. I HAVE NOT FOUND ANYTHING SLAYING IN THIS MAP FOR ALL INDICATORS. There are marriages everywhere. Even in Evge and Msi. It's better not to talk about Asus. If we get lucky. But among the top cards in competing brands - the minimum number of defects.

In short, is the problem with optimization a common problem?

TopPCGamer
And at what resolution do you have 200FPS in Days Gone with friezes?

MOSHIVURIA CHIBIS
yes, everything above 60 fps and at a higher hertz of the monitor causes friezes, in this video there is almost no driving, friezes during it, under the frieze I don’t freeze a frame with a drawdown to zero, I mean, the fps drops by only a couple of frames, but visually you can already see the micro jerk of the picture at this moment

I personally have Denis Kyokushin
in full HD for 200 frames, on ultra settings, in 2k about 180 fps, and it also freezes on a motorcycle

fundamentalist
But he should not freeze at 200 frames

I played a cat simulator, I see here many also have stutters. We are waiting for patches, apparently the game has a real problem with the shader compilation process and it can be more noticeable on older processors, but the game sometimes starts to hammer into one thread, it doesn’t really know how to multithread and it works extremely weakly. I hope they fix it with updates

Palych Rokov
No need to drive. There aren't any stats. Here's another ploy for you. You have a full percentage of junk. It's high time to change. Therefore, in most games, he does not cope and the card is pulled to the bottom.

fundamentalist
Now I understand. It's just that at first I thought you were playing 4k, so I assumed that you were talking about 4k + 200 fps about Daze Gun. Soryan.

lapwing mouse wrote:
No need to drive. There aren't any stats. Here's another ploy for you. You have a full percentage of junk.
fundamentalist wrote:
comp i9 10900k-32GB-3090 Ti
fundamentalist wrote:
stuttering for a fraction of a second does not disappear
You don't understand, it's different. What, boring again?
Spoiler
I didn't see it myself and took it out of the blue, I just ran into a person. Laughter and nothing more.


Nikita Drozdov wrote:
in short, is the problem with optimization a common problem?
For the UE4 engine, a very YES! Most do not know how to work with him. The developer officially recognized it. Will fix. Developers:
Spoiler

TopPCGamer
TopPCGamer wrote:
In the 3000th line of rtx, the memory is basically hot, most likely saving on thermal pads
No, it's not hot, choose a normal manufacturer, and there will be no problems. If you take vision, of course 90-100 is the norm there, but if Colorful is a volcano! Even on 3090TI - 73 degrees. On my second 3070Ti - 70-72 degrees, downvolt + screws 60-64. Not hotter than hynix. And you don't have to go anywhere. Everything works as intended from the factory.

If the game firizit do not engage in nonsense without first caching the shaders, the game will not work normally. Maybe, of course, the game does not save cached shaders during the game at all and each time a re-compilation is called, this can be checked by going through the game and starting it again whether there will be stutters. Developers forget that UE 4 is also used for cgi in cinema and animation, which means that a huge number of surface shaders are not suitable for games and need to be simplified

Denis Kyokushin wrote:
At what resolution do you have 200FPS in Days Gone with friezes?
I didn’t say anything about Days Gone at all, but it goes quite cheerfully on p9-5900x and pth 3090
01001000 01101001 wrote:
No, not hot, choose a normal manufacturer, and there will be no problems. If you take vision, of course 90-100 is the norm there, but if Colorful is a volcano! Even on 3090TI - 73 degrees. On my second 3070Ti - 70-72 degrees, downvolt + screws 60-64.
3070ti and 3090ti cards are different and the memory is different there, 73s in 3090ti will not be there even under water from any manufacturer. The video above confirms this, judging by the temperatures of the chip, the dude has a card under water, and the memory is under 88c. I don’t even monitor at home, I took a card from an email, because there are iron fuses and there will be no burnouts

TopPCGamer
We're talking about GDDR6X, only a micron makes it. Reviewed the map.
Spoiler
Are you saying you're lying?
TopPCGamer wrote:
judging by the chip temperatures, the dude has a card under water, and the memory is under 88c.
Why is there WATER? MSI Suprim 3080Ti 78 degrees. What else is water? They will collect it in stuffy cases, then open the lids and, lo and behold, the temperatures drop.

01001000 01101001
You yourself know that in fact the temperature is 80C, it is very hot, both in real life and for computer equipment. And let the manufacturer say that 110C for video memory is its limit, and 100C is quite the norm. Each of us wants to achieve a lower temperature so that the kit lives longer and it becomes pleasant in our hearts when, with the help of various experiments, we lower the temperature even by 5C. Already the gland becomes easier to breathe. My will, I would have lowered the pace more and more, as low as possible, but not to the point of fanaticism. Plus, overclocking opportunities are becoming wider.

on the volcano, the norms seem to be the same .. only you need to limit the fps in the nvidia control panel .. not in the game, namely in the panel

maybe someone will be interested in how it is for me .. to do .. download dxvk-1.10.2 .. add 2 files d3d11.dll , dxgi.dll to the root
https://github.com/doitsujin/dxvk/releases

Vvvvd
Indeed, the game is going great on the RX 6600.
I found a test with this card, everything is smooth and even.
Spoiler
The main thing is to enable Anti-lag in the driver.
Spoiler

Max P
Even fps is low at 6600, I have 55-65% more at 2070 super frames, with the same settings and at the same location! something is wrong with the system, okay if the difference was only 30-35% but not higher than 60%, or is the game just optimized for amd?