3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
6
666Lucifer 17.12.19 10:08 pm

GTX 980 TI is overheating

Asus Matrix Platinum gtx 980 ti in games is heated to 73, the entire Internet clambered everywhere up to a maximum of 68 I got married? Who understands please respond should I change the map?
88 Comments
Sort by:
6
666Lucifer 17.12.19

Whether to go with this card for the GTX 1070?

L
Luka_gg 17.12.19

666Lucifer
1070 and 980TI same performance jump makes no sense. Make up one's mind the problem itself is not necessary. The temperature is great. In all games it is different. 65-75 excellent performance. When will be over 80-85, then start to inquire. 1080 I warmed up to 80 something in Call of Duty Modern Warfare Remastered. And so, within 70 holds.
If you do not like, take MSI Afterburner and manually configured work schedule, fans.

B
Belomorkanal 17.12.19

I have a GTX980 to 80-85 in the dispersal warms up (3 years running at this temperature), and then they 73 have a lot. Of course, the difference in CO, I still repova card, but still, the physical limit of heat practically the same for all chips of the same model.
At 1070, of course, go not worth it. I would be 980 to 1080ti go would not.

G
GeRR_Praetorian 17.12.19

Belomorkanal
I would be 980 to 1080ti go would not.
There is a difference in times more! I have two 980's went on for two 1080. In the end the performance difference is beyond huge! As for 1080ti is about four well-overclocked 970!

6
666Lucifer 17.12.19

VOVAN WOLF
Ie, no need to worry? 73 in the Witcher 3 Wild Hunt is the normal temperature in full HD?

6
666Lucifer 17.12.19

Thank you all for the response

6
666Lucifer 17.12.19

VOVAN WOLF
If you do not like, take MSI Afterburner and manually configured work schedule, fans. Dude, it's really helped the truth is the fans rabotaut 60% that won't kill?

L
Luka_gg 17.12.19

666Lucifer
Of course the fans have a life, I reasoned to myself, it is better to fans than high temperature, because continuous heating and cooling may lead to blade chip in the future. Of course, this is all on the side of caution, but even between the temperature idle at 38 (and PC I have all day) and the normal operating temperature of 67, will be as little as possible difference (when heated, the iron expands).
And the fans, in fact consumables. Usually these fans are a great resource, the rest depends on the contamination, vibration, type of construction, loads, etc. It is easier to replace, find in the service the store or on aliexpress - BULK rolls.
Strongly do not worry, do not wrap itself and the dump of the chip and the lifetime of the fan, the resource of such fans should be great, googling and look closely at them, do not think, if anything, on the market to buy yourself. For these cards working great in the 70's (+ and - 5 degrees), and remember that have a video card r9 290x from AMD working normal is GENERALLY considered to be 95 degrees. Live and don't care. Extremely working for NVIDIA was considered to be 95 (probably still does), but I do not see and do not recommend to handle over 85. According to the idea, the graphics chip has protection, it will reset the frequency and decrease the performance. But at what temperature, where in this figure.

D
Denis Kyokushin 17.12.19

666Lucifer
Dude, it's really helped the truth is the fans rabotaut 60% that won't kill?
In Bonera have the option TACHOMETER of the COOLER.Put it in the OED, and look at the number of revolutions.If 3000 rpm is,then it's cool.I have up to 4000 welling

M
MagicHero 17.12.19

[Denis]
[Denis] wrote:
I have up to 4000 welling
And the noise doesn't bother you? Just over 2,000 are already starting to make noise, the fans on the cards and you're here about 4000 write. There is probably a noise like a vacuum cleaner )))

D
Denis Kyokushin 17.12.19

MagicHero
Whichever fan.On the 4890 ahlada with the turbine,there was ass.And the 7950 is quiet valve.On 570GTX quite a different ratio of speed to % was.It 3000об/min was equal to 70-80%.As for Nvidia,I don't know.By default it 2000-2200об/min was.She, too, was quieter than the 4890
But all 3 vidyushku momentum of the set was 3,000+ Bonera

6
666Lucifer 17.12.19

VOVAN WOLF
And maybe in the corps? End-to-end video card is worth it to change the housing? Now I play with open side cover. Maybe the card is not blown? her little space

6
666Lucifer 17.12.19

[Denis]
You have some map?

6
666Lucifer 17.12.19

If it will work on my card to put a dropsy?

s
saa0891 17.12.19

666Lucifer wrote:
If it will work on my card to put a dropsy?
What if the temperature does not rise above 85 degrees then there is no point in even strain on the matter (if for example the map more than 2-3 years you can just replace the thermal compound),if the money is nowhere to go then of course you can and the water supply if it certainly is for your card.

6
666Lucifer 17.12.19

saa0891
Thanks for the advice understand

6
666Lucifer 17.12.19

[Denis]
The tachometer shows 1850 - 1900

M
MagicHero 17.12.19

[Denis]
As the valve at 4000 rpm can be quiet? there is created a flow of air that almost no vacuum cleaner get. About turbine that is Radik 5850 and there at maximum speed was terrible, but to recognize drives great air, rear body side vidyuhi the air flow was strong. I'm on 780-y 1070-y x 1080-th try to make the fan speed so that at the peak they were at a maximum around 2000 (though the 1080-I'm hot all the same and in some games reach up to 2000 rpm when warmed up to 60-65 degrees, more is not seen).

G
GeRR_Praetorian 17.12.19

666Lucifer
If it will work on my card to put a dropsy?
Dropsy cool thing) But there's only one problem - it is very expensive and gemorno is! But it's worth it.
My first video card was heated to 89C in games at 4k resolution, if you play 3-4 hours. After put the dropsy, and vidyahu dispersed, but now the temperature of the first vidyahi max 53C, 65C of the second, if you play 6 hours and more!

D
Denis Kyokushin 17.12.19

666Lucifer
I have a 7950.But I'm blowing on the bottom put each other the two valves 120mm to flow to increase the flow of air.I once experimented with a 4890.Open the case and next to the card blowing on put the valve 120mm.The increase in the flow of air down to 9-10°C. Was 83°,was 74°.

MagicHero
As the valve at 4000 rpm can be quiet? there is created a flow of air that almost no vacuum cleaner get.
Of course,I understand that you are full of disturbances.But the 7950 when 4000об/min quieter than the 4890 at 3000+.On 570GTX with 3000+ quieter than the 4890 at 3000+

About turbine that is Radik 5850 and there at maximum speed was terrible, but to recognize drives great air, rear body side vidyuhi the air flow was strong.
I don't know what a 5850,but in my opinion,it workflow less.So,it needs to be colder.And what about flow,is yeah,with the system unit often found in clods of dust.

I'm on 780-y 1070-y x 1080-th try to make the fan speed so that at the peak they were at a maximum around 2000 (though the 1080-I'm hot all the same and in some games reach up to 2000 rpm when warmed up to 60-65 degrees, more is not seen).
My old 570GTX at 2000+ rpm was heated to 85°:

So I raised to 3000