Overclocking fx-8350
Good dayGuys, this is not difficult, write the instruction with values for reasonable and proper overclocking of the CPU, memory controller, and just what you need. Or photos BIOS send.
There are a million videos, but it is either driven to 5 MHz, or describe the process for free understand this.
And to spend a couple of days just to attempt the selection of stable frequency and no others possibilities
CPU fx-8350, mother, Gigabyte GA 970A DS3P and two pieces of 8GB memory frequency 1600
Thank you in advance
Memory, for example, did not work at my desired frequency, until I told her naprugu not underestimated. Still don't understand why. And savernik on any naprugi doesn't want to consistently take 2600. I'm not talking about percent, which is 4.2 holds only for 1.4. Although this mine BP and the mother acting up, because OS stress is almost always lower. I'm not talking about its drawdown
RadM0nd
Bred!!!!!
Went test. And another question. What do you have for cooling?
And by the way. Now the computer starts the second time everytime
william1992
Yes.
And actually, there to the right is a default value. The fact that the left has exhibited me.
william1992
Heh. I am rebuilding always skipped for half an hour he whirls it around, after produces something like unable to restore OS and just loads Windows normally.
RadM0nd
And what to try? To increase naprugu?
And in what direction with the timings to play?
william1992
Start the second time? It's a double start. I have the same hnya during acceleration. XS what is the reason, but it seems like not fatal. Hard they wear out faster.
william1992
The timings necessary to improve, but how much and how I don't know. Himself on this subject found nothing. About naprugi: I first set a little too high, after ran the comp in HADES, and if it was the norm, gradually it was lowered.
My klad: https://m.citilink.ru/catalog/computers_and_notebooks/parts/coolers/768823/?mrkt=spb_cl
And the 40mm fan on Savernake lies
RadM0nd
In short, if without overclocking, you just need a quick memory to buy?
if does not work reset the BIOS or the computer finally starts up, the jumper on the mother and pull up the right contact for 15 sec and put it back where it was
william1992
do not hurry with the purchase of the Opera, the adviser is not credible) one word without confirmation
william1992
Sorry to drive the CE still have, because the mother will put the frequency stated below. Plus the memory controller operates at a frequency of 2200, and preferably 8 core 2600.
