Overclocking fx-8350
Good dayGuys, this is not difficult, write the instruction with values for reasonable and proper overclocking of the CPU, memory controller, and just what you need. Or photos BIOS send.
There are a million videos, but it is either driven to 5 MHz, or describe the process for free understand this.
And to spend a couple of days just to attempt the selection of stable frequency and no others possibilities
CPU fx-8350, mother, Gigabyte GA 970A DS3P and two pieces of 8GB memory frequency 1600
Thank you in advance
RadM0nd
the fact that you have the acceleration I see, and all say about the dispersal of the Saint, and you show the result of acceleration in BF the same or a pub if not difficult
RadM0nd
Take phone photos of the BIOS settings. The main page is where the HT link, NB, etc., memory and page stress
I will be sooooo grateful
william1992
william1992 wrote:
Take phone photos of the BIOS settings. The main page is where the HT link, NB, etc., memory and page stress
In the UEFI by pressing F12 removes the screen automatically on the flash drive if it is plugged into the computer
[Denis]
It's too long. First the stick, then from there to here shipping. And everything on the phone
william1992
As can - do. And generally, me the stone is not very good caught, so the stress is pretty high. And savernik 2600 does not hold. Although 4300 all the rules were
All parameters of the system
Multipliers
Energosberegenie
Naprugi
Only do not advise to put all like me. Everyone is chasing different, so better to sit, than to extinguish a computer. And generally on this subject there is a very good vidosic game one (the same obmanschiki where the ficus drags:D)