The choice of processor v.6 [x]
In this topic we choose processors.Before ask question, it's highly recommended to read the theme FAQ: Processors
Do not forget about the rules of the forum.
Old topic here
LakerSC
Well, in fact Yes, they need a naprugu to increase for normal acceleration and test drive and paste a good spread and the temperature monitored. And to know whether the acceleration will pull the Mat Board with power supply. In fact, your to 4.4 percent chases without a raising naprugi only change the multiplier, but the above is already different. Someone above 4.5 does not take someone 4.7 or 4.8 easy wins and the tests pass. But those people are usually liquid cooling was.
PS: Write in the subject of overclocking your Protsiv % of the Mat cost, what is your PSU. This percent of a dispersed, think advise you without any problems.
7Rain7
LakerSC
Up to 4.7 or 4.8 When driven need naprugu 1,45-1,47 put. And this is the motherboard need the latest revision that support processor power consumption up to 220 Wat.
But to 4,6-4,65 Easy to disperse when the voltage 1,425-not to exceed 125 Wat (the standard motherboard is designed for 140 Wat for power processor).
7Rain7
Ryazancev
Spoilerwolf in the percent I set manually + mother m5a97 evo 2.0 myself a little adjust. Temperature normal, can hang in the first minute of starting a computer, maybe 30 minutes playing the new tomb raider. Hang even on 4.0. Auto-overclocking up to 3.8 without problems, manually crashes. Put clean 10 wines, all the same. Energosberegenie included\off, no effect. Or am I missing something or the problem is in the gland. BP rm 750x. thanks for the tips.
LakerSC
Here comrade ICYMEANSCOLD you have put in your fx 8300 -4.5 when the voltage 1,404.
1 Disable turbo boost
2 to Set the voltage 1,425
3 to disable energosberegenie (I Have the all-inclusive mother M4A89GTD Pro 2010)
4 If driven on the bus , then you need to adjust the RAM (lower the frequency or increase the timings), to Monitor the frequency of the North bridge CPU and Hyper transport.
Your processor is no problem to overclock to 5 GHz!!!
Here is a good video on overclocking 8350
Spoiler
Pay attention after manipulating the voltage was 1,428
LakerSC
Dude with a video that I made increased the voltage of the CPU due
CPU\NB Load-Line Calibration - he exhibited Extreme
Ryazancev
СпойлерCPU\NB Load Line Calibration and CPU Load Line Calibration had not touched these settings were on auto. Now set high, a frequency of 4.2, 1.35 voltage. In Hades the test passes, the player no longer hangs. Perhaps the reason was in this, thanks for the help.
LakerSC
If the cooler is good, then put the voltage 1,425 Is a standard For Vishera(the kernel name from this family). In this (normal, safe) the voltage can be 4.6 and higher in a light supply.
LakerSC
Sori, yesterday work had stopped, then the family sat and forgot about the dialogue here.
And Ryazancev you've got written here.
Clocked this percent 8320. 4.8 GHz on postoyanku. Stone looks lucky, because naprugi of 1.42 for the eyes missing. 4,4 took on the car, 4,6 took 1,386 V. Can of course IDA was lying, maybe because of the nurse. Drove to Sabertuch Asus 990 FX Rev 2.0. Voltage not recorded, put the shift. (Asked not the final frequency, and how you can add extra) In the end, it turned out that it is even with the stock was allowed to increase. Above 4.8 for tenure of meaning not seen.
PS: by the Way noticed such a joke to 4.5 GHz this percent is, in principle, not fry, and the room is not warm when you run Prime, the above 4,6-4,7 fry so that Mama do not cry. Prime was socks on the top grill on the system unit to dry to put (dropsy blows up). Yes and no, Igori not load so. For them 4.4 to the ears and quite. The more that
LakerSC kind of wrote what his video card.
How do you think what p-R is more powerful and faster : Snapdragon (x8) 616 1.6 million ghz with Adreno 405 or Mediatek (x8) MT 6752L of 1.7 ghz with Mali - T760 MP2
Stanislav CZ
You're in the computer thread, why are there miserable mobile percent?
Good afternoon.
Have the percents I7-2600K 3.4 GHZ
http://ark.intel.com/products/52214/Intel-Core-i7-2600K-Processor-8M-Cache-up-to-3_80-GHz
There was a problem:
Playing GTA5, with two GTX980 game gives 70-80FPS, after the installation of mods started to fall for frames up to 47-50 and above all, both loaded some 45%.
It turned out that a script mod that is heavily loaded percent. After overclocking to 4.1 GHZ number of personnel grew to 50-60, but still, not as we would like.
Want to upgrade your platform, but I don't know what to choose.
Help with a choice, a toss-up between:
Intel® Core™ i7-6700K
http://ark.intel.com/products/88195/Intel-Core-i7-6700K-Processor-8M-Cache-up-to-4_20-GHz?q=i7-6700K
Intel® Core™ i7-4960X
http://ark.intel.com/products/77779/Intel-Core-i7-4960X-Processor-Extreme-Edition-15M-Cache-up-to-4_00-GHz
Intel® Core™ i7-5820K
http://ark.intel.com/ru/products/82932/Intel-Core-i7-5820K-Processor-15M-Cache-up-to-3_60-GHz
Intel® Core™ i7-5930K
http://ark.intel.com/products/82931/Intel-Core-i7-5930K-Processor-15M-Cache-up-to-3_70-GHz?q=Intel%C2%AE%20Core%E2%84%A2%20i7-5930K%20Processor%20(15M%20Cache,%20up%20to%203.70%20GHz)
Fenderrr wrote:
After overclocking to 4.1 GHZ number of personnel grew to 50-60, but still, not as we would like.
what prevents you to overclock even higher? This CPU easily being chased by up to 4.5 GHz and above.
PS: regarding the choice of CPU/platform, then look in the direction of 6700к. But remember, big profit get.
-SK.art-
Thanks for the reply! The above overclock was afraid, since the current value of the temperature of each core sometimes reach 78 degrees (despite water cooling), which exceeds the maximum rate specification of 72.6 degrees. I am afraid that is not burned.
Fenderrr wrote:
that is more than the maximum rate specification of 72.6 degrees. I am afraid that is not burned.
actually rule is higher in these processors. Up to 80 gr. you can safely heat and no steam. Another thing is that the temperature is high you have, once ITS use. Maybe the voltage is overestimated in the stone?
-SK.art-
I'm not very versed in any subtleties, this I have semi-manual acceleration (turbo with Boston), I put megateli, and the rest of the BIOS does himself, on the car. Voltage shows - 1,476 V
Fenderrr
under DDR3 i7 4960х
under ддр4 5930 respectively.
tolstaia powerful processors suitable for overclocking are in the selection and will long be relevant in case of large memory. it is also not necessary to philosophize collecting them multigpu.
Fenderrr wrote:
I put megateli, and the rest of the BIOS does himself, on the car. Voltage shows - 1,476 V
it is in vain that you do! That's just such a strain you will ruin the stone. You need to manually set the values.
Maybe you can help topic is this: http://forums.overclockers.ru/viewtopic.php?p=7993170#p7993170
-SK.art-
Thanks for the help.
Tell me one more time how best to set the multiplier to the desired frequency? By default, turbo Bost offers increasing multipliers on each core - 35; 36; 37; 38, i.e., in this scheme, the system will be able to accelerate to 3.8 GHZ, but if I want to correctly reach the frequency of 4.4 GHZ, for me it is better to put each multiplier to 44 or also ladder 41; 42; 43; 44 and then pick up the voltage to 1.4 V not exceeding (and preferably ~1,32, as sensors often do not show very accurate data).
upd: Seems to be less understood. Lit up to 4.5 GHZ, set the voltage to 1.36, the temperature of each core dropped the load to 69-70, instead of what was 78-80. In AIDA64 stress test for the stability of the system voltage rises to 1,386-1,391 (average value - 1,365) and here is a question - it seems to be saying that if the voltage will not go beyond the 1.4, it will not be injurious to percent, and I have at full load the voltage at the upper limit, it is not terrible?