3 New Notifications

New Badge Earned
Get 1K upvotes on your post
Life choices of my cat
Earned 210

Drag Images here or Browse from your computer.

Trending Posts
Sorted by Newest First
-
-SK.art- 11.02.20 02:04 pm

Overclocking is all about overclocking v.6

In this thread discussing overclocking.

Before you ask, how to disperse a recommend to get acquainted with the materials given in the following link.

Materiel for the novice Overa
The benefits of overclocking. The first part, the theoretical
The benefits of overclocking. Part two R11; overclock the processor and RAM

Guide to setting the BIOS

Overclocking Core i7-3770K: learning to compromise

Before ask question, it's highly recommended to read the theme FAQ: Processors

Previous topic here
229 Comments
Sort by:
V
Vinni-Pukh 11.02.20

W3aMisterWinner
W3aMisterWinner wrote:
1)not the fact that all is stable
Well, well. Every month checked Prime for 24 hours.
W3aMisterWinner wrote:
2)profit is too small to risk the death or degradation of the stone. 4.5 or 5.0 stable(even if in a rare case stone good+scalped+stable,the difference between them is tiny).
+15-20% boost.

W3aMisterWinner wrote:
In the case of the second it is interesting to see will be removed if the shit under the hood,and how long will chase the overall.
If Intel puts all in 2066, there will be solder, is going for 2011-3 socket, on the line for enthusiasts.
W3aMisterWinner wrote:
even 6950х(10ядер)on Podwale,the architecture of which is generally almost not after
Broadwell-e is tight, and squeeze you could be something. But the temperature there is just hard.



W3aMisterWinner wrote:
this is evident even in x4 core broadwell platform for the homeless
There was another problem, because cache 4 levels and save the transistor budget. And 5775c i7 with a frequency of 4.3 GHz is much steeper than the same 6700К from 4.8 GHz, for the 4th cache.
P. S. Waiting for SkyLake-X or KabyLake-X X299 chipset and 2066 socket. Of course, a minimum of 6 cores. And so, 5930К quite happy with 4.6 GHz.
Bomber
Good you got 4670К, you just Windu launched with such frequency ? Or the games and tests is?

B
Bombardirovschik 11.02.20

Vinni-Pukh
no, the tests are not tried , maybe some other time and then suddenly
Spoiler

V
Vinni-Pukh 11.02.20

Bomber
Gorgeous GIF? Did you make it?
Bomber wrote:
no, the tests are not tried , maybe some other time and then suddenly
Test in Intel XTU and go!

B
Bombardirovschik 11.02.20

Vinni-Pukh
SFII is not seen on overah in some thread about Rosen and buried.
you need to try something like, fry.XS will be there , this bench of the hit warm as Linpack.
Stress test there is sort of based on LINPAC.

V
Vinni-Pukh 11.02.20

Bomber
Not warm as Linpack. Good test. Pass, play games without problems.
Really look , not rising above 1.45

B
Bombardirovschik 11.02.20

Vinni-Pukh
Yeah, I blew up the baby to the maximum stability.
you mean like a test bench or stress test stocki?

V
Vinni-Pukh 11.02.20

Bomber
Intel XTU is great test. Games. 80-85% of the stability. Games the most it! 2 hours and everything is stable.

B
Bombardirovschik 11.02.20

Vinni-Pukh
Clearly, it is possible to drive.I'm usually of the CFC, a CPU test, there is at the end of the test folder is created with graphs of the total time of the test temperature, voltage, frequency, etc.

V
Vinni-Pukh 11.02.20

Bomber
SCR heavier

B
Bombardirovschik 11.02.20

Vinni-Pukh
What about lenpaka under avkh instructions? to get it to 5 GHz you probably need to load the system unit as a whole in a tank of liquid nitrogen.

F
FollowMisterWinner 11.02.20

Vinni-Pukh
If Intel puts all in 2066, there will be solder, is going for 2011-3 socket, on the line for enthusiasts.
I'm talking about 8800к,and it will be on 2066.

V
Vinni-Pukh 11.02.20

Bomber
AVX heat like Satan. Not to mention AVX2. If you need 99.99% of stability, LinX is not advised, because it is stupid hot water bottle. The best is Prime95, it has no such priority, and does not heat too much, because uses FMA3 instructions. But then have to drive the day. But I think you are on the i5 is not a render, but only play Igori, so that for you the coolest option is the Intel XTU - two hour run.
SCR, how to say, he uses AVX instructions. Also advise, though too testit not bad.
CPU-Z is a vyser, not to be taken seriously.

B
Bombardirovschik 11.02.20

Vinni-Pukh
Got it! Will it test. it will be able to reach higher frequencies for everyday use!

V
Vinni-Pukh 11.02.20

Bomber
Bomber wrote:
Got it! Will it test. it will be able to reach higher frequencies for everyday use!
That's it.

V
Vinni-Pukh 11.02.20

Bomber
Accomplish your goal then, as it turned out.

B
Bombardirovschik 11.02.20

Vinni-Pukh
yeah, you have to stir up.

S
SLAVTIM 11.02.20

Good day people. Need the help of a special minor overclocking CPU AMD X4 860К 3.7 Hz, the Mat Board ASUS A88X-PLUS. In angelscom not strong. If possible step by step. As in the BIOS to navigate I know, and the tab for overclocking. Then half of the terms in Russian half in English, and I'm not much confused.

0
0Bers0 11.02.20

Good night. 8320 and 6700к
For 1060 some one well perfigo
For 1080 Hz
Take the video better, the same pogreshnosti

0
0Bers0 11.02.20

4,8 8320-th Deepcool dumanska of poblocka
120th and runoff from Intel
There is no problem. But funny, yesterday on both systems with the SSD ran a virus scan with qoreitem, FX finished already 9 minutes earlier. Both did pure SSD

0
0Bers0 11.02.20

So with the face the IOC to show how vidyaha see themselves in connection to the Amud for Intel. 1060 and 1080
Difference 0 ))) Can you get both systems thoroughly with the fuck Bombers )))) the Only thing at max throttle 832-y fries as much as the whole room at 4,8 Ggz and 6700 in stock at 4Ggz too warm, but in Raha 3 menbshe
Motherboard - if not for 5K a piece, formula to take makes no sense.

Motoped chmoryat only because of the blue switches?