Solving problems with brakes, lags and friezes (Dragon Age: Inquisition)
Write here all the ways to increase the fps in the gameMAXHARDMAN
To burn can not , just wear increases the life of components is reduced , moreover, to at least some decent progress happened will have to inflate naprugu , so there is no point in overclocking.
Configuration.Intel i3 G3240.The Geforce 465 gtx,6 GB of RAM.Method does not help.Changes zero.The processor is loaded on 100%.The menu is impossible.If you are able to start the game,horrible lag,constant freezing.
suarez888http://www.playground.ru/files/dragon_age_inquisition_zapusk_igri_na_2_yadernom_protsessore_versiya_2-85279/
Here is my config and here is to choose values(
Intel pentium cpu b960 2.20 ghz-two cores
RAM-4GB
Video-nvidia Gt 720m
64 bit system
If anyone has this and who has solved the problem with the glitches in the cut scenes peshite more chto value))
Thank you good people. Here is my configuration: Intel core i5 2310, Gigabyte gtx 560, 8 RAM. Texture I have exhibited is very high, tessellation off I this function is unnecessary and the sense of it is almost no shadow low and the rest high. Was previously 23фпс, with subsidence of up to 17, now 45-50 and drawdown to 35фпс. I'm happy with.
And has anybody been able to play without freezes on Intel Pentium Dual-Core E5400? just because of the terrible freezes and the CPU usage it is not possible to play it
The game have 3+ stream to the norms of fps, at this percent and not to play.
Here
Mode, do not delete the link plx.
Here is the config of the system
Е8200 Intel core duo 2.66 ghz-two cores
RAM-4GB
Video-nvidia GTX 550ti
64 bit system Win 7
Did everything as written in 1st post.
- ordered-GameTime.MaxSimFps 24 -GameTime.ForceSimRate 15.0 -
- in task Manager priority to low
- Settings NVIDIA + PhysX configuration - select your graphics card
- the user file.cfg
In the end, the game runs fast in the main menu, no lag ,freezes,freezes.In the game on medium, everything is going well, but there is a small freeze for a few(2-3) seconds. And all is well. Does anyone have any ideas what we can add, change , register to remove the hang?
Still interested in the functionality described in this topic by the author cergio.net about the inclusion of the physics calculations on the GPU.
Can you describe in more detail where in the control panel of the graphics card, is this setting?
mikmaks
In the control panel of the graphics card to the left of the line set PhysX config.
Did everything as described above. Fps in General have not risen in any way. I would not say that there are some lags, freezes, etc., but not comfortable in any way.
My i7-2670qm 2.2 ghz , 6 RAM, video card nvidia gt 520m(about), 64 system, 4 cores.
20 fps issues ,but it's a little, or my laptop won't work with them any way???
kv1
I have on the laptop i3 2.5 ghz 4gb RAM GeForce Gt 335 m gives 25-30 fps.
XS on your can be less. Clean system