Overclocking: all about overclocking processors v.5
In this thread we are discussing overclocking processors.Before asking "how to overclock", I recommend that you familiarize yourself with the materials provided at the following link.
Matchast for a beginner overclocking
On the benefits of overclocking. Part one, theoretical
On the benefits of overclocking. Part two R11; overclocking the processor and RAM
BIOS settings reference
Overclocking Core i7-3770K: learning to make compromises
Previous topic here
How will the 160V power supply limit for motherboards based on lga 2011-3 affect overclocking?
MunchkiN 616
It must be assumed that somewhere after 4.2-4.3GHz on 6 cores / 3.5-3.6 on 8 will start to trot.
Please tell me to what frequencies you can overclock the intel i5-3340 processor, mother of Asus LGA-1155 Z77-Z Z77. What is the multiplier and the frequency of the processor and RAM to set * (Kinkgston RAM works at 2400MHz)
WWQ
4.4 it is from you and should be taken with an automatic machine without raising a sponge. Above, go up a little bit. Drive on the multiplier, don't touch the tire. Lift it up slowly. This stone takes up to 1.45 without straining at all. You can go the other way around. Set overclocking to 4.6. by a factor of 23 and a spill of 1.45. And then load and test for stability with prime. Well, little by little, reduce the sponge. As soon as it stops passing the tests, return it to the last stable version. This is certainly not a completely human way, but this stone easily holds 1.45 so you can't burn it. The main thing is that your power supply unit, mother and cooling system are suitable for overclocking.
I must say right away that with a spike of 1.45 and an overclocking of 4.6 - 4.8, this stone fries in prime not sickly, so monitor the temperature in the test.
CRYSIS0707
Chuyu Viktorovich will punish us for offtopic. Have a good weekend.
digital1994
It makes no sense for you to bother with overclocking the i5 3340. Moreover, you do not have the slightest knowledge of this. It makes sense to help in this matter only when a person understands this at least a little. Each stone is individual, there is no rigid template. What will suit one with this stone is not the fact that will suit another. And it doesn't make a lot of sense. With a good vidyashka for the gamers, your stone is quite enough.
7Rain7
Config of the rest of the iron in the profile. At the expense of the processor - he updated the BIOS and he calmly took a 4.61 GHz multiplier + a bus on an automatic sprung, the temperature in tests is max 70, in practice 59-63, another problem surfaced, the northern one is now heated to 82g, ordered a cooler + thermal paste for it, at the same time the whole premapping system.
W3aMisterWinner
if the processor asks for more and more voltage every day, all at once, overclocking more likely it degrades or a motherboard.
may soon have to think about returning to amd fx ololo
People, the processor does not want to follow the BIOS settings!
I set a frequency of 2.8 GHz and a voltage of 1.2V on Fenom II 955, and when the VDVS was loaded, it again returns a voltage of 1.4V.
Where do you need to dig?
W3aMisterWinner
I have a problem with BP today = (
I sit on RaptoxX RT-600PSP 600W, had 6pin molex to power up
as he R9 290 keeps now - do not know ... And then there's Clock 955, which has a nominal 125W
Someone tell me how much 6pin pci-ex connector can remove the ampere from the molecules? I
ordered the inexpensive Toughpower DPS G 650W,
but it will go from the warehouse for a week = (
People. The computer gave a strange feint, after replacing the power supply it did not turn on, the first time (the BIOS does not start)
and after the third attempt, with the renunciation of the video card and HDD, it issued a strange message starting with the phrase "Overlock Waring ..."
Should the power supply be replaced with influence BIOS settings ?!
One question torments me: what to do if the motherboard has an 8-pin + 8-pin power connector, and your power supply unit has only one 8-pin?
Spartak_13
can be cut 2-6 or 2-8 peaks for a video card into slices and connect them according to the pin diagram. shopping mall overcame that there seems to be the same voltage.
or deal with the dregs with the connection of 2x bp.
however, it is better to buy a normal power supply
mrG0bliN
I understand that you are contacting me. I will answer that I just want an m-atx motherboard for x99. And on the market something similar can only be found in Asus. And they just have an 8-pin + 8-pin power connector.
Spartak_13
m-atx for x99 is a very strange purchase, even by my pitch,
but you should take a closer look. most asus have 8 + 4 and the other half is just 8.
Spartak_13
pitch miracles. Yes, if you look for an express feed line, it means it's a whole series.