Overheating of the PC. What is overheating?Please help.
In General, the computer shuts down with a little work under load.Then trying to turn on and off again several times and then turn on(obviously when it's something cool).Iron.
Another question:how are they counted 40A,when the graphics card consumes 183Вт which corresponds to 15A.Or does the laws of physics don't work?
Kolik0550
XS there who counted. You have on the first screen overheating. The cooler on the back wall you have that on blowing is what?
PUT DICULOUSLY COOLING ON the MOTHERBOARD (as far as POSSIBLE to COOL IT) AND INSTEAD of a NEW PSU BETTER BUY B. U. MAP ГТХ660 SAY
GOOGLING ON YOUTUBE LOOK HOW TO SET THE OLD BIOS AND TRY TO RESET AND CONFIGURE YOUR OWN(MAY ALSO HELP)
Kolik0550
Maybe BP over 285 unable to cope.
Look at the control panel - administrative tools - event viewer if there was error kernel power 41 in the event viewer (local), critical mistakes. A month ago her pain, just don't remember how I removed ))
Cerabyte
Take a look. Really briefly went there, saw nothing. But I will look again.
Kolik0550
86 on the substrate, if is a real number. And judging by the lighting on laposte and the sticker(if the sticker on the cap) the same blowing was standing.
While housing replacement and as a consequence good cooling gave result. Outages fiction, BUT later in the evening after dlitelnoe playing wot PC hangs tightly. So I'll try again and figure this out. In General, we still have to test it. Whether to repeat or not see.
blowing on it would be like this)
And everything is as it should be. And hand you can understand where blowing.
86 this is the norm for this vidyuhi. Once again convinced of this http://ru.gecid.com/video/zotac_zt-285e3la-fcp/?s=all
So not vidyuhi problem exactly. The more I wrote above that drove her apart and above 90,no artifacts or reboots nebylo. She has a 105 maximum.
in short optimalny method is to push housing all the hardware (so will exclude short-circuit)
assemble the test stand on the table.
to change the power supply unit even if he fails there is no sense(the power supply is normal you)
easier to buy a graphics card more modern and more energy efficient
Recently, it was the same cyclic rebooting also did not think that the power supply it was a 750 put it to a friend and worked 2 days and started the same symptoms replaced the feeder on 600ватник and everything is fine for 5 months it's prolemy
Kolik0550
Well, so kuserok and looks, so whatever. New case the problem has not disappeared apparently. Put kryaknuty normal Hades, that would have shown the 12 volt line. Cut test and after 15-20 minutes skrine results. You have 89 only at the start load was after 3 minutes and the valves already at the maximum. After 20 minutes, the pace the pace will increase. + Artifacts are not always the first climbs, the memory count of the processor and VRM temperature, but generally only the crystal is. And this is also an issue with znaenie that of the periphery connected?(external hard drives,wifi whistles etc)
A 4g modem, external hard, wifi adapter(access point usb). Come home seskrini that have after the change of the case temperature and voltage.